Proton Exchange Membrane Fuel Cells (PEMFCs) are clean energy conversion devices that are widely used in various energy applications. In most applications, the main challenge is accurately estimating the state of health (SoH) of the PEMFCs during dynamic operating conditions. Moreover, their behavior is affected by numerous physical phenomena such as heat and membrane flooding. This paper proposes the design of an observer to estimate the PEMFC parameters. A state-space model is first built from 2D physical equations solved by a finite difference in a discretized space domain. The discretized dynamic model is then used to design an observer based on the continuous-discrete extended Kalman filter. The observer has been validated experimentally and is used to estimate the parameters of a PEMFC under dynamic operating conditions. For several load variations, the results obtained using the proposed observer accurately characterize the dynamic responses of PEMFC in real-time.
31 January 2025 in International Journal of Robotics and Control Systems
One of the main issues with grid-connected distributed energy systems, including photovoltaic (PV) systems, is the DC bus voltage's instability during load fluctuations and power line short circuits. This paper attempts to address this problem and proposes to use superconducting magnetic energy storage (SMES) to stabilize the voltage of the DC link and improve the power quality and transient stability of the power system. The investigated configuration components are PV cells, boost converter, chopper, SMES, three level inverter (NPC), filter, grid, and load. MATLAB / Sim Power System is used to test the performance of a SMES in order to ensure the balance of the DC bus voltage of a PV system connected to the grid. Several scenarios were considered to show the performance and benefits of combining a SMES with the PV system. The outcomes of the examined scenarios (fault and load change) demonstrate the precision of the employed control systems, maintaining the DC voltage at acceptable levels (≈500 V), enhances the structure stability, and improving power quality (GPV THD = 4.34). Finally, it can be concluded that the proposed configuration will help in achieving high penetration scenarios of PV systems.