While optical codes in optical code-division multiple access (OCDMA) has been extensively investigated, research of optical coding labels in optical multi-protocol label switching (MPLS) network is relatively unexplored. This paper studies optical labels with spectral-amplitude coding (SAC) for optical packet switching (OPS) network. The research focuses on implementing two different codes in optical labels: stuffed quadratic congruence (SQC) codes and M-sequence codes. Label-error rate (LER) is quantified to ascertain the influence of code pattern on system performance. The findings suggest that SQC coded label can support more numbers for label stacking, due to its very low cross-correlation value.
We propose an intelligently structured receiver to achieve high-speed transmissions over optical code-division multiple access (OCDMA) networks. Employing spectral-amplitude coding (SAC) reduces multiuser interference (MUI) in OCDMA, but the network bit-rate is limited by phase-induced intensity noise (PIIN) coming from the incoherency of light sources. To mitigate PIIN, the receiver performs interference estimations and regenerations through consecutive stages. The MUI is removed by subtracting the estimated interference term from the received multiplexed signals. For PIIN variance, it is both dependent on and positively related to user number and bit-rate. Reducing the number of interference users allows the network to support transmissions with a higher speed under a given noise level. The proposed scheme has the advantages of all-optical signal processing and a compact structure. Additionally, the function of noise suppression is rarely studied in the existing MUI elimination schemes, such as serial interference cancellation (SIC) and parallel interference cancellation (PIC). The simulation results show the proposed receiver achieves significant increment in bit-rate than the conventional balanced detector in SAC–OCDMA networks.
Residue stuffed quadratic congruence (RSQC) codes are proposed for radio-over-fiber (RoF) scheme based on spectral-amplitude-coding (SAC) optical code-division multiple-access (OCDMA) networks. These new codes generated from residue method can enlarge the code space, and the decoder of this new code is cost-effective and suitable for realization. The error rate performance of the proposed RSQC code (two-code keying) and the original SQC code (on-off keying) are analyzed.
Optical buffering is one of the essential functions in optical packet switching (OPS) network. This letter employs optical code-division multiple-access (OCDMA) signals of spectral-amplitude-coding (SAC) in a packet-buffering architecture. In the proposed scheme, the original OCDMA label of the incoming packet is identified and converted to a new label by a code-switching system. As multiple packets overlap in the time domain in a single device, SAC is adopted for packet encoding to avoid multiple access interference (MAI). The concepts of queuing system and Gaussian approximation are employed to model the buffer architecture. Simulations were conducted to demonstrate the tradeoff between packet dropping probability and the signal variations in the label identification process. The buffering performance in terms of bit-error rate (BER) is examined. The results show SAC labels perform well on packet buffering.
Multi-protocol label switching (MPLS) is a promising solution to implement high-speed internet protocol (IP) networks by reducing the layer number. To meet the increasing demand for data traffic, optical packet switching (OPS) is integrated under IP to provide high bandwidth to end users. Generalized MPLS (GMPLS) is perfectly compatible with the routing algorithm in IP/MPLS as it supports packet-switching functions. In this paper, we investigate the label stacking scenarios in GMPLS networks. In GMPLS, label stacking is done to reduce the node complexity by appending multiple labels to a single packet. Wavelength-division multiplexing (WDM) and optical code-division multiplexing (OCDM) signals have been widely used as identifying labels. As the labels can be permutated among the wavelengths or code dimensions, the structure of a label stack can be varied. However, studies on the relationship between label stacking scenarios and network performance are limited. To investigate this issue, we propose three label stacking models: sequential code distribution; sequential wavelength distribution, and random label distribution. The simulation results show that the sequential wavelength assignment, wherein the labels are uniformly distributed among the wavelengths, exhibits the best system performance in terms of the label-error rate (LER).