In this study, a configuration of a compact imaging objective based on a reflecting annular harmonic lens was proposed. Light propagation through the proposed optical system was comprehensively modeled using a dedicated special program and the ZEMAX software, with the latter used to derive the point spread function (PSF). Several relationships were used to describe the connection between key parameters of the objective, including its focal length, field of view, and thickness. We demonstrated that it was possible to design a compact imaging objective whose overall length could be one to two orders of magnitude smaller than its focal length. Using direct laser writing, a reflecting annular harmonic lens was fabricated and used in the proposed objective scheme. The performance of the objective was experimentally studied by imaging a light source and a test pattern. The performance of the compact imaging objective based on a reflecting annular harmonic lens was verified in principle. A PSF value of approximately 16 microns was experimentally obtained, for a lens with a diameter of 25 mm with a focal length of 100 mm.
Subject of study. The simplest scheme comprising two harmonic lenses is considered, which allows the formation of an image with higher quality than that obtained using each of these lenses individually owing to the accurate selection of the heights of their microreliefs. Method. Two harmonic lenses with coupled microrelief heights are fabricated using the direct laser writing method on the photoresist. An experiment is conducted on the formation of images by the system comprising two harmonic lenses and an individual harmonic lens. Main results. A “HarmLens” software for modeling of the systems comprising harmonic and diffractive lenses is designed. Modeling is performed within the geometric optic approximation using the ray tracing method. The possibility of obtaining a significant reduction in the displacement of the primary focal plane in comparison with the individual harmonic lens case is demonstrated by the specific selection of the microrelief height in this system. The system of two harmonic lenses is demonstrated to form an image with an average contrast exceeding the average contrast of the image formed by the individual harmonic lens by 1.4 times. The point spread function of the system comprising two harmonic lenses is experimentally demonstrated to be 1.6 times narrower than that of the individual harmonic lens with an equivalent focal length. Practical significance. The system of two harmonic lenses proposed in this work allows a sharper image than the image formed by an individual harmonic lens to be obtained. The system of two harmonic lenses can be adopted in machine vision systems where the compact arrangement of the objective’s elements is more important than the high quality of the formed image.