Methanogens capable of accepting electrons from Fe0 cause severe corrosion in anoxic conditions. In previous studies, all iron-corrosive methanogenic isolates were obtained from marine environments. However, the presence of methanogens with corrosion ability using Fe0 as an electron donor and their contribution to corrosion in freshwater systems is unknown. Therefore, to understand the role of methanogens in corrosion under anoxic conditions in a freshwater environment, we investigated the corrosion activities of methanogens in samples collected from groundwater and rivers. We enriched microorganisms that can grow with CO2/NaHCO3 and Fe0 as the sole carbon source and electron donor, respectively, in ground freshwater. Methanobacterium sp. TO1, which induces iron corrosion, was isolated from freshwater. Electrochemical analysis revealed that strain TO1 can uptake electrons from the cathode at lower than −0.61 V vs SHE and has a redox-active component with electrochemical potential different from those of other previously reported methanogens with extracellular electron transfer ability. This study indicated the corrosion risk by methanogens capable of taking up electrons from Fe0 in anoxic freshwater environments and the necessity of understanding the corrosion mechanism to contribute to risk diagnosis.
11 March 2016 in Journal of Nuclear Science and Technology
Ion exchange is one of the most useful separation methods. Certain ion exchange resins have been developed for use in reprocessing technology. The purpose of this study is to evaluate the U selectivity of a benzimidazole-type anion exchange resin and its potential for the separation of U from a solution of simulant fuel debris in HCl. The selectivity of the benzimidazole-type anion exchange resin for adsorption of the major elements present in fuel debris in HCl solution (such as in debris from the Fukushima Daiichi nuclear power plant) was analyzed, and the tendencies were discussed from the viewpoint of complexation. Moreover, chromatographic separation of U from the other elements was evaluated using the resin. The results indicate that this type of resin has high U separation selectivity. Consequently, the authors developed a novel strategy involving the use of this resin for U separation in conjunction with chlorination of hardly soluble materials by using atmospheric-pressure nonthermal plasma. This strategy is also proposed to be applicable for stabilizing waste forms and for nuclear fuel material accounting, such as for debris from the Fukushima nuclear power plant and other complex hardly soluble nuclear materials.
Characterization of fuel debris is required to develop fuel debris removal tools for decommissioning Fukushima Daiichi nuclear power plant (1F). Especially, knowledge about the characteristics of molten core-concrete interaction (MCCI) product is needed because of the limited information available at present. Samples from a large-scale MCCI test performed under quenching conditions, VULCANO VW-U1 were analyzed to evaluate the characteristics of the surface of MCCI product. Four samples were selected from test sections at different locations. As a result, the characteristics of the samples were found to be similar. Several corium phases, such as cubic-(U,Zr)O2 and tetragonal ZrO2, were detected by X-ray diffraction (XRD), but concrete-based phases, such as the crystalline SiO2 phase, were not detected by XRD because the quantity of the SiO2 phase was too small to be measured. The Vickers hardness of each phase in these samples was higher than that of previously analyzed samples in another VULCANO test campaign, VBS-U4. Based on a comparison between MCCI product generated under quenching condition, such as VW-U1, and gently cooled MCCI product, such as VBS-U4, the MCCI product generated under quenching condition is more homogeneous, and its hardness is higher than that of the gently cooled MCCI product.
16 May 2018 in Journal of Nuclear Engineering and Radiation Science
Evaluation of fuel debris properties in the Fukushima Daiichi nuclear power plant (1F) is required to develop fuel debris removal tools. In the removal of debris resulting from the Three Mile Island unit 2 (TMI-2) accident, a core-boring system played an important role. Considering the working principle of core boring, hardness, elastic modulus, and fracture toughness were found to be important fuel debris properties that profoundly influenced the performance of the boring machine. It is speculated that uranium and zirconium oxide solid solution (U,Zr)O2 is one of the major materials in the fuel debris from 1F. In addition, the Zr content of the fuel debris from 1F is expected to be higher than that of the debris from TMI-2 because the 1F reactors were boiling-water reactors. In this research, the mechanical properties of cubic (U,Zr)O2 samples containing 10%–65% ZrO2 are evaluated. The hardness, elastic modulus, and fracture toughness are measured by the Vickers test, ultrasonic pulse echo method, and indentation fracture method, respectively. In the case of (U,Zr)O2 samples containing less than 50% ZrO2, Vickers hardness and fracture toughness increased, and the elastic modulus decreased slightly with increasing ZrO2 content. Moreover, all of those values of the (U,Zr)O2 samples containing 65% ZrO2 increased slightly compared to (U,Zr)O2 samples containing 55% ZrO2. ZrO2 content affects fracture toughness significantly in the case of samples containing less than 10% ZrO2. Higher Zr content (exceeding 50%) has little effect on the mechanical properties.
28 August 2012 in Journal of Radioanalytical and Nuclear Chemistry