Sheila Dangol

Ms. Sheila Dangol


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2022 in Energies
Verified
Journal Article
Open access
PDF file
AKAakash Khadka
Aakash Khadka
APAnmol Parajuli
Anmol Parajuli
SDSheila Dangol
Sheila Dangol
BTBijay Thapa
Bijay Thapa
LSLokesh Sapkota
Lokesh Sapkota
Anish GhimireAnish Ghimire
Anish Ghimire
This study evaluates the effects of the varying substrate to inoculum ratios (S:I) of 0.5, 1, 2, 3, 4, 5, and 6 (volatile solids/VS basis) on the kinetics of biogas production during batch mesophilic (35 ± 1 °C) anaerobic digestion (AD) of simulated food waste (FW), using anaerobic digestate as the inoculum. Kinetic parameters during biogas production (scrubbed with NaOH solution) are predicted by the first-order and the modified Gompertz model. The observed average specific biogas yields are in descending order corresponding to the S:I ratios 1, 2, 4, 6, 3, 5, and 0.5, respectively, and the significant effect of the S:I ratio was observed. The tests with the S:I of 1 have the maximum average biogas production rates of 88.56 NmL/gVS.d, whereas tests with the S:I of 6 exhibited the lowest production rates (24.61 NmL/gVS.d). The maximum biogas yields, predicted by the first order and the modified Gompertz model, are 668.65 NmL/gVS (experimental 674.40 ± 29.10 NmL/gVS) and 653.17 NmL/gVS, respectively. The modified Gompertz model has been proven to be suitable in predicting biogas production from FW. VS removal efficiency is greater in higher S:I ratios, with a maximum of 78.80 % at the S:I ratio of 6, supported by the longer incubation time. Moreover, a significant effect of the S:I ratio is seen on kinetics and energy recovery from the AD of FW.

7 September 2023 in Heliyon
Verified
Journal Article
Open access
PPPrativa Poudel
Prativa Poudel
Anish GhimireAnish Ghimire
Anish Ghimire
GHGuy Howard
Guy Howard
BEBarbara Evans
Barbara Evans
MCMiller A. Camargo-Valero
Miller A. Camargo-Valero
SDSheila Dangol
Sheila Dangol
On-site sanitation systems (OSS) are a source of greenhouse gas (GHG) emissions. Although efforts have been made recently to measure and quantify emissions from septic tanks using various field-based methods, the vast majority of published literature reporting GHG emissions from OSS units (e.g., pits and tanks) is based on non-empirical evidence. This systematic review presents an overview and limitations of field-based methods used for the quantification of GHG emissions from OSS. Papers published in English were searched in three databases: Google Scholar, PubMed, and Directory of Articles and Journals. Peer-reviewed papers that reported field-based methods applied to containment units in OSS were included in this study. Only eight out of 2085 papers met the inclusion criteria with septic tanks as the sole technology reported and were thus, considered for the review. Most of the studies have been conducted in middle- and high-income countries. Field-based measurements of GHGs are conducted using a flux chamber (FC) and the most commonly used FC methods are (a) the modified simple static FC, (b) automated static FC, and (c) floating FC. Data reported in published studies do not provide sufficient information on the calibration and validation of the results from the FCs used. The complex FC designs, laborious fieldwork operations, and reliance on expensive, specialist equipment, suggest that such methods may not be suitable in Low and Middle-Income countries (LMICs), where resources and access to laboratory facilities are limited. Also, the complexity of pits and tank typology in LMICs (i.e., unstandardised designs and sizes) may be a challenge to the use of FCs with fixed dimensions and set operational conditions. The variation in the quantification methods and resulting emission rates among the studies indicates that gaps prevail in the use of existing methods. Therefore, there is still a need for a simple field-based, easily adaptable FC method with adequate calibration and validation that can help in reliably quantifying the emissions from different OSS in any LMICs.