To analyze the kinetic characteristics of a debris flow that occurred on 9 April 2000 in Tibet, China, a meshfree numerical method named smoothed particle hydrodynamics (SPH) is introduced, and two-dimensional and three-dimensional models are established in this work. Based on the numerical simulation, the motion process of this debris flow is reproduced, and the kinetic characteristics are analyzed combining with the field investigation data. In the kinetic analysis, the flow velocity, runout distance, deposition, and energy features are discussed. Simulation results show that the debris flow mass undergoes an acceleration stage after failure, then the kinetic energy gradually dissipates due to the friction and collision during debris flow propagation. Finally, the debris flow mass blocks the Yigong river and forms a huge dam and an extensive barrier lake. The peak velocity is calculated to be about 100 m/s, and the runout distance is approximately 8000 m. The simulation results basically match the data measured in field, thus verifying the good performance of the presented SPH model. This approach can predict hazardous areas and estimate the hazard intensity of catastrophic debris flow.

Hillslope processes and mass movement are key issues in the analysis and evaluation of geological disasters in mountainous regions. A rockfall-dominated talus slope exhibits a typical outcrop–talus slope system as the product of detached boulders and rock fragments. The Zongling rockfall zone is one of the most active outcrop–talus slope systems in southwest China, and it provides a representative case study on the assessment of rockfall hazards at the base of talus slopes. In this article, the formation mechanism and failure mode of this rock-talus system were studied using field investigation, remote sensing image analysis, and numerical simulation. The findings reveal that the lithology and rock mass structure of the study site are controlling factors for outcrop retreat and the progressive development of talus deposits. This process is intensified by rainfall and mining activities. Boulder accumulation on the platform at the middle section of the talus slope serves as top loading for the slope mechanical system. During the boulder–ground interaction, the rockfall impact acts as toe cutting to change the geometry and mechanical balance of the talus slope. It was found that toe cutting significantly influenced the slope stability, which led to a decrease in the antisliding force of the slope. The slope failure induced by rockfalls occurred with the combined effect of top loading and toe cutting on this talus slope. During rockfall prevention and mitigation in this region, the government and residents should consider the geodisaster chain, as this relates to the impact of rockfall on talus slopes, in addition to the risk of damage due to the rockfall trajectory.