Fiber optic sensors have been gradually used in aerospace, petrochemical, electronic power, civil engineering, and biomedical fields because of their many advantages such as the anti-electromagnetic interference, corrosion resistance, light weight, small size, high accuracy, and easy reuse. In recent years, sensing and demodulation technologies based on microwave photonics have attracted widespread attention. Optical fiber sensing combined with microwave photonics has higher sensitivity and flexibility, which is important for the demodulation of interferometric signals. This article introduces and analyzes the principle, structure, and performance of the demodulation technology of fiber optic interferometric signals based on microwave photonics from the perspective of system structures, such as filters, oscillators, and interferometers, and discusses the future research and development directions.
A fast real-time demodulation method based on the coarsely sampled spectrum is proposed for transient signals of fiber optic extrinsic Fabry-Perot interferometers (EFPI) sensors. The feasibility of phase demodulation using a coarse spectrum is theoretically analyzed. Based on the coarse spectrum, fast Fourier transform (FFT) algorithm is used to roughly estimate the cavity length. According to the rough estimation, the maximum likelihood estimation (MLE) algorithm is applied to calculate the cavity length accurately. The dense wavelength division multiplexer (DWDM) is used to split the broadband spectrum into the coarse spectrum, and the high-speed synchronous ADC collects the spectrum. The experimental results show that the system can achieve a real-time dynamic demodulation speed of 50 kHz, a static measurement root mean square error (RMSE) of 0.184 nm, and a maximum absolute and relative error distribution of 15 nm and 0.005% of the measurement cavity length compared with optical spectrum analyzers (OSA).
9 September 2015 in IEEE Transactions on Electron Devices
The performance and reliability of the high-power light-emitting diodes (HP LEDs) are closely related to the quality of the die attach adhesive (DAA) layer, because voids or delaminations in the layer may cause higher junction temperature, and even result in the break of the chip. In this paper, a dynamic compact thermal model is constructed for an independent HP LED without being attached on a cold plate. The time-constant spectrum method based on the thermal model is applied to characterize the transient thermal behavior of the DAA layer and other layers along the heat flow path. Thermal transient experiments are carried on HP LED samples with different DAA dosages. The theoretical and experimental results demonstrate that the time-constant spectrum for LEDs tested without cold plate can reflect the thermal characteristics of the DAA layer as well as that with cold plate. Differences in the HP LED samples with different DAA layers can be obviously distinguished in the time-constant spectrums as well. Compared with the traditional testing method with cold plate, direct test in air for HP LEDs has the advantages of easy operation, time saving, and no pollution to samples.
1 November 2018 in Journal of Lightwave Technology
Spectral distortions are complex and unpredictable in Fiber Bragg Grating (FBG) sensing applications. An inappropriate choice of FBG demodulation algorithm will lead to unacceptable results in practice. Although many demodulation algorithms have been developed for distorted spectra, they may be limited for some types of spectral distortion. Until now, no model of FBG spectral distortion has been proposed to test different demodulation algorithms. Here, we fulfill this aim by introducing a comprehensive model with asymmetrical distortion, multi-peaks distortion, interferometric noise, background noise and random noise. Using numerical simulations, we evaluate the performance of eight most typical demodulation algorithms with this model. We show that different algorithms should be used within specific ranges of spectral distortions. Altogether, this study provides a guide map as useful reference for selecting an appropriate FBG demodulation algorithm for practical applications. Furthermore, our proposed model paves the way for developing more reliable FBG demodulation algorithms for different spectral distortions.
To better apply fiber Bragg gratings (FBGs) to various bending required situations, good understanding of their bending characteristics is crucial. In this Letter, a theoretical model to describe the changes of spectral properties of an FBG against the bending radius is proposed. This model shows that all the bend-induced spectral changes, the shift of center wavelength, decrease of reflectivity, and reduction of bandwidth, may be explained by the decrease of the effective “dc” refractive index change spatially averaged over one grating period. Experimental results are in agreement with theoretical predictions and confirm the effectiveness of the proposed model.