Herein, we have discussed three major methods which have been generally employed for the generation of optical beams with orbital angular momentum (OAM). These methods include the practice of diffractive optics elements (DOEs), metasurfaces (MSs), and photonic integrated circuits (PICs) for the production of in-plane and out-of-plane OAM. This topic has been significantly evolved as a result; these three methods have been further implemented efficiently by different novel approaches which are discussed as well. Furthermore, development in the OAM detection techniques has also been presented. We have tried our best to bring novel and up-to-date information to the readers on this interesting and widely investigated topic.

The design of a refractometric sensing system for liquids analysis with a sensor and the scheme for its intensity interrogation combined on a single photonic integrated circuit (PIC) is proposed. A racetrack microring resonator with a channel for the analyzed liquid formed on the top is used as a sensor, and another microring resonator with a lower Q-factor is utilized to detect the change in the resonant wavelength of the sensor. As a measurement result, the optical power at its drop port is detected in comparison with the sum of the powers at the through and drop ports. Simulations showed the possibility of registering a change in the analyte refractive index with a sensitivity of 110 nm per refractive index unit. The proposed scheme was analyzed with a broadband source, as well as a source based on an optoelectronic oscillator using an optical phase modulator. The second case showed the fundamental possibility of implementing an intensity interrogator on a PIC using an external typical single-mode laser as a source. Meanwhile, additional simulations demonstrated an increased system sensitivity compared to the conventional interrogation scheme with a broadband or tunable light source. The proposed approach provides the opportunity to increase the integration level of a sensing device, significantly reducing its cost, power consumption, and dimensions.

Lab-on-a-chip systems are currently one of the most promising areas in the development of ultra-compact sensor systems, used primarily for gas and liquid analysis to determine the concentration of impurities. Integrated photonics is an ideal basis for designing “lab-on-a-chip” systems, advantageous for its compactness, energy efficiency, and low cost in mass production. This paper presents a solution for “lab-on-a-chip” device realization, consisting of a sensor and an interrogator based on a silicon-on-insulator (SOI) integrated photonics platform. The sensor function is performed by an all-pass microring resonator (MRR), installed as a notch filter in the feedback circuit of an optoelectronic oscillator based on an electro-optic phase modulator. This structure realizes the frequency interrogation of the sensor with high accuracy and speed using a conventional single-mode laser source. The system sensitivity for the considered gases is 13,000 GHz/RIU. The results show that the use of frequency interrogation makes it possible to increase the intrinsic LoD by five orders. The proposed solution opens an opportunity for fully integrated implementation of a photonic “laboratory-on-a-chip” unit.

Herein we propose a design of a wavelength-tunable integrated vortex beam emitter based on the silicon-on-insulator platform. The emitter is implemented using a PN-depletion diode inside a microring resonator with the emitting hole grating that was used to produce a vortex beam. The resonance wavelengths can be shifted due to the refractive index change associated with the free plasma dispersion effect. Obtained numerical modeling results confirm the efficiency of the proposed approach, providing a resonance wavelength shift while maintaining the required topological charge of the emitted vortex beam. It is known that optical vortices got a lot of attention due to extensive telecommunication and biochemical applications, but also, they have revealed some beneficial use cases in sensors. Flexibility in spectral tuning demonstrated by the proposed device can significantly improve the accuracy of sensors based on fiber Bragg gratings. Moreover, we demonstrate that the proposed device can provide a displacement of the resonance by the value of the free spectral range of the ring resonator, which means the possibility to implement an ultra-fast orbital angular momentum (de)multiplexing or modulation.

Light beams bearing orbital angular momentum (OAM) are used in various scientific and engineering applications, such as microscopy, laser material processing, and optical tweezers. Precise topological charge control is crucial for efficiently using vortex beams in different fields, such as information encoding in optical communications and sensor systems. This work presents a novel method for optimizing an emitting micro-ring resonator (MRR) for emitting vortex beams with variable orders of OAM. The MRR consists of a ring waveguide with periodic structures side-coupled to a bus waveguide. The resonator is tunable due to the phase change material Sb₂Se₃ deposited on the ring. This material can change from amorphous to crystalline while changing its refractive index. In the amorphous phase, it is 3.285 + 0i, while in the transition to the crystalline phase, it reaches 4.050 + 0i at emission wavelength 1550 nm. We used this property to control the vortex beam topological charge. In our study, we optimized the distance between the bus waveguide and the ring waveguide, the bending angle, and the width of the bus waveguide. The optimality criterion was chosen to maximize the flux density of the radiated energy emitted by the resonator. The numerical simulation results proved our method. The proposed approach can be used to optimize optical beam emitters carrying OAM for various applications.

The paper presents a photonic integrated circuit (PIC) design that offers a high degree of integration of building blocks required to implement a swept-source optical coherence tomography (SS-OCT) system. The device includes an interferometer, sample arm, k-clock, and a tunable reference path integrated on a single chip implemented based on the silicon nitride fabrication platform. The PIC elements are optimized to perform low losses and minimal dispersion around a central operation wavelength of 1310 nm, which is critical for applications such as OCT. The device was simulated using Ansys Lumerical software. Simulation results show that the proposed PIC provides precise control of the scanning depth with a resolution of 0.725 nm/mV. Also, the frequency of the OCT signal does not exceed 17 GHz for scanning distances below 5 mm.