Qingfeng Wang

Dr. Qingfeng Wang

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 January 2017 in Metals
Verified
Journal Article
Open access
PDF file
YFYi Fan
Yi Fan
QWQian Wang
Qian Wang
QWQingfeng Wang
Qingfeng Wang
TWTongliang Wang
Tongliang Wang
QWQingfeng Wang
Qingfeng Wang
FZFucheng Zhang
Fucheng Zhang
The thermo-mechanical control processing (TMCP) of low carbon (C) Nb-Ti-containing HSLA steel with different cooling rates from 5 to 20 °C/s was simulated using a Gleeble 3500 system. The samples’ microstructure was characterized and the tensile properties measured. The results show that a microstructure mainly consisting of quasi-polygonal ferrite (QPF), granular bainitic ferrite (GBF), and martensite/austenite (M/A) constituent formed in each sample. Furthermore, the accelerated cooling led to a significant grain refinement of the QPF and GBF, and an increase in the density of dislocations, as well as suppressed the precipitation of nanoscale particles; however, the overall yield strength (YS) still increased obviously. The accelerated cooling also brought about a decrease in amount of M/A constituent acting as a mixed hard phase, which weakened the overall strain-hardening capacity of the QPF + GBF + M/A multiphase steel and simultaneously elevated yield-to-tensile strength ratio (YR). In addition, the mechanisms in dominating the influence of controlled cooling on the final microstructure and tensile properties were discussed.

1 July 2020 in Materials Research Express
Verified
Journal Article
Open access
QWQingfeng Wang
Qingfeng Wang
FGFan Gao
Fan Gao
XFXiangzheng Feng
Xiangzheng Feng
ZLZhenxi Li
Zhenxi Li
The effect of Al content on the hot deformation behavior and microstructure evolution of TiAl-6 (Cr, Nb, Ta) alloy was studied by hot compression tests. The results show that when the alloy presented a low Al content, it contained a greater percentage of β + γ mixed structure at the grain boundary, and a finer lamellar colony size. Under the same deformation conditions, a reduction in Al content lead to a reduction in flow stress, but the hot deformation activation energy Q increased from 540 kJ mol−1 to 617 kJ mol−1. The increase of the β + γ mixed structure at the grain boundary promoted the rotation of the lamellar colony, thereby inhibiting the lamellar twisting process, and also reducing the dynamic recrystallization volume fraction. Reducing the strain rate and increasing the amount of strain can increase the dynamic recrystallization volume fraction of the alloys. When extruded at 1150 °C with an extrusion ratio of 10:1, both alloys containing Al presented a completely recrystallized structure.

2 December 2016 in Metals
Verified
Journal Article
Open access
PDF file
QWQingfeng Wang
Qingfeng Wang
RRRong Rong
Rong Rong
FGFan Gao
Fan Gao
ZLZhenxi Li
Zhenxi Li
YLYanguo Liu
Yanguo Liu
QWQingfeng Wang
Qingfeng Wang
The hot deformation behavior and microstructural evolution of Ti-44Al-5V-1Cr alloy were investigated by hot compression tests at temperatures of 1000–1250 °C and strain rates of 0.001–1 s−1. It was indicated that the dependence of peak stress on deformation temperature and strain rate could be accurately described by a hyperbolic sine type equation. The activation energy, Q, was estimated to be 632 kJ/mol. The hot processing map was developed at different strains on the basis of dynamic materials modeling and the Murty criteria. As a result, the instability zones occurred in the regions of low temperature (0.1 s−1). The flow soft mechanism of the instability regions is stress relaxation caused by localization deformation at lamellar boundaries. Dynamic recrystallization is the mainly refining and spheroidizing mechanism of lamellar microstructures. The optimum hot working condition of as-cast TiAl alloy occurs in the temperature range of 1175–1225 °C and the strain rate range 0.05–0.1 s−1. The large-size TiAl alloy rectangular bars with crack-free appearance were successfully prepared by hot extrusion. After annealing, the fine and uniform microstructure with excellent deformation ability was obtained.

16 June 2023
Verified
Conference Paper
Closed access
PDF file
QWQingfeng Wang
Qingfeng Wang
SHShuling Hu
Shuling Hu
GYGongliu Yang
Gongliu Yang
YZYongfeng Zhang
Yongfeng Zhang
To improve the stability accuracy and anti-interference capability of the Fiber Optic Gyroscope (FOG) inertial platform, a Nonlinear Integral Fuzzy Sliding Mode Control (NIFSMC) method that can improve the stability accuracy and anti-interference capability of the inertial platform is proposed. Firstly, a Nonlinear Integral Sliding Mode Control (NISMC) is adopted to rapidly converge the state of the stability loop of the inertial platform to the equilibrium state. Secondly, this article combined fuzzy control and exponential approach law. By designing the fuzzy rules, the parameters of the exponential approach law are adjusted timely. The stability accuracy of the stable loop is improved. Finally, the nonlinear integral fuzzy sliding mode control is verified by simulation experiments. Results show that the NIFSMC method can enhance disturbance rejection ability and improve stability accuracy. Compared with Integral Sliding Mode Control (ISMC) and NISMC, the stability accuracy of NIFSMC is improved by 59.2% and 48.9% respectively.