For the purpose of resisting to the hard climatic condition and so as to improve the insulation of building material in the Ben Smim Ifrane region, we proceeded in this work to develop local materials, clay is a building material very used in walls or floor in this region, The goal consists to improve the thermal properties of clay bounded with granular cork and compared with the thermal properties of the same clay with expanded perlite.The first step in this study is the chemical characterization of the clay by means of X-ray diffraction. The results show that the clay sample is mainly made up of Illite/ muscovite which is a non-swelling clay. The second step is the thermal characterization of clay bounded with cork or expanded perlite by using the methods: Hot plate and Flash. Then a comparison of their densities and thermal properties was done in both cases: air dried and heated.Finally a Comparison of the energy saving was done to determine the best materials in order to manufacture full bricks done from clay-cork or clay-expanded
13 March 2017 in IOP Conference Series: Materials Science and Engineering
This work is part of the valuation of local materials such as clay (earth), alfa fiber and straw fiber. The goal is to use these materials as bricks in rural construction. These materials are abundant, natural, and renewable. The objective of this work is to study the thermal and mechanical behavior of a new material by mixing clay (chosen as the binder) with different mass percentages of alfa fiber (0.5%, 1%, 2%, 3%, 4%), and to compare these results with those of materials often used in the construction of individual houses in rural Morocco (clay + straw). The results obtained prove to us that using straw fibers can reduce the thermal conductivity compared to alfa fiber, which allows to have energy savings of 2% to 7%. By against, alfa fibers can improve the mechanical behavior of clay-based materials when compared to the clay + straw material (an increase of 8% to 17% in the tractive resistance by bending and 6% to 18% for compression resistance). These results also specify the optimal usage conditions of these fibers (alfa and straw) in the clay bricks.
Reducing the energy cost of building has become a necessity, that's why this work was carried out to study the behavior of thermal inertia and thermal properties for walls coated by the sealants: white cement-cork, cement mortar -cork and plaster-cork. For this purpose time of diffusion, total heat capacity and total heat losses were defined for local composed from a layer of those binders. Also an analysis of thermal conductivities, thermal effusivities and thermal diffusivities for composites white cement-cork, mortar cement-cork and plaster-cork were studied