Expeditious development of PENGs has been restricted several problems such as toxicity, high cost, and long-life. Herein, we report a biowaste crab shell-extracted chitin nanofiber (CNF) and CNF/poly(vinylidene fluoride) (PVDF)-based biocompatible, biodegradable, low cost, light weight, flexible, highly durable and efficient piezoelectric nanogenerators (PENGs) that enable harvesting of electrical energy from the mechanical energy of a living system. The pure CNF thin film-based piezoelectric nanogenerator (CPENG) shows excellent output performances (open circuit output voltage (Voc) = 22 V, short circuit current (Isc) = 0.12 μA) with a high piezoelectric coefficient, d33 = 9.49 pC N−1. The PENG based on CNF/PVDF (PCPEG) also shows very good output characteristics (Voc = 49 V and Isc = 1.9 μA). The incorporation of CNF in a PVDF matrix noticeably enhanced the electroactive β-phase nucleation, (F(β)) ∼ 81%, with a superior d33 ∼ 35.56 pC N−1. The PCPENG is able to charge a 2.2 μF capacitor to 3.6 V within a short time span (20 seconds) and illuminate 22 blue LEDs connected in series. Our as-fabricated PENGs could be suitable for long-life in vivo biomedical energy harvesting devices that can harvest energy from blood flow and heart beats and charge energy storage devices from mechanical energy such as body movements, moving cars, sea waves, air flow, and rain drops.
27 June 2017 in ACS Applied Materials & Interfaces
Using a simple chemical precipitation process followed by sintering at 400 °C, NiO nanoparticles (NPs) and C–NiO nanocomposites (NCs) have been synthesized and characterized by X-ray diffraction, UV-visible spectroscopy, zeta potential measurement, field emission scanning electron microscopy and energy dispersive X-ray spectroscopy. Then, NiO NP or C–NiO NC loaded PVDF thin films were fabricated via a simple solvent casting or solution casting method. Thermogravimetric analysis confirmed good thermal stability of the nanocomposite films. Strong ion–dipole interaction between the negative surfaces of NiO NPs or C–NiO NCs and –CH2 dipoles of polymer chains leads to the formation of a long stabilized TTTT conformation, i.e. formation of large number of electroactive β polymorphs in the modified PVDF thin films. Detailed study of the dependency of the dielectric properties on filler content (NiO NPs/C–NiO NCs) and frequency illustrates significant increase in the dielectric constant in the three phase C–NiO NCs–PVDF system than in the two phase NiO NPs–PVDF system. The dielectric constant is found to be as large as 317.4 at 20 Hz with a relatively low tangent loss value, and good flexibility when 20 mass% C–NiO NCs is incorporated in the PVDF matrix. These results have been explained in terms of Maxwell–Wagner–Sillars interfacial polarization at the NiO NPs/C–NiO NCs and insulating polymer matrix interface, evolution of a conductive network and formation of a microcapacitive structure in the NiO NPs or C–NiO NCs modified PVDF thin films.