Magnesium (Mg) alloys have received increasing interest in the past two decades as biomaterials due to their excellent biological compatibility. However, the corrosion resistance of Mg alloys is relativity low which limits their usage in degradable implant applications, and controlling the corrosion resistance is the key to solving this problem. This review discusses the relative corrosion mechanisms, including pitting, filiform, high temperature, stress corrosion, etc., of Mg alloys. Various approaches like purification (Fe, Ni, Cu, etc.), micro-alloying (adding Zn, Mn, Ca, RE elements, and so on), grain refinement (severe plastic deformation, SPD, etc.), and surface modifications (various coating methods) to control corrosion and biological performance are summarized. Moreover, the in vivo implantations of Mg alloy vascular stents and the issues that have emerged based on the reports in recent years are introduced. It is recommended that corrosion mechanisms should be further investigated as there is no method that can remove all the impurities and a new purification approach needs to be developed. The concentration of micro-alloy elements should be carefully controlled to avoid superfluous compounds. Developing new continuous SPD methods to achieve fine-grained Mg alloys with a large size scale is necessary. The development of a multifunctional coating could also be considered in controlling the Mg degradation rate. Moreover, the research trends and challenges in the future of Mg biomaterials are proposed.
1
1 December 2023 in Journal of Magnesium and Alloys
Cross-domain wireless sensing has always been challenging due to the sensitivity of wireless signals to various environmental factors, which we refer to as subdomains. However, current efforts are limited to cross-one-subdomain tasks requiring target domain data for model training or multiple receivers for data collection. Taking common gesture recognition as an application example, we attempt to demonstrate the feasibility of cross-multiple-subdomain wireless sensing in the more challenging domain generalization (DG) setting. It is possible to extract domain-invariant features from one or several source domain(s), thereby avoiding the need for multiple receivers or target domain data. We also propose an intelligent wireless data augmentation technique based on subdomain-guided perturbations, named WiSGP. Specifically, the independent domain model generates perturbations in the direction of the largest subdomain variations. Then, these subdomain-guided perturbations augment the gesture model's input to enable better domain-invariant feature extraction, even when various subdomains interact. Similarly, gesture-guided perturbations augment the domain model's input, resulting in more accurate subdomain-guided perturbations and minimal gesture label changes. Extensive experiments have been conducted on three datasets collected from various NICs. In terms of room, location, orientation, and user subdomains, WiSGP exhibits excellent accuracy, generalizability, and portability for both cross-one-subdomain and cross-multiple-subdomain tasks.
Existing fault diagnosis methods assume the identical distribution of training and test data, failing to adapt to source–target domain differences in industrial scenarios and limiting generalization. They also struggle to explore inter-domain correlations with scarce labeled target samples, leading to poor convergence and generalization. To address this, our paper proposes a cross-domain few-shot intelligent fault diagnosis method based on Mixup data augmentation. Firstly, a Mixup data augmentation method is used to linearly combine source domain and target domain data in a specific proportion to generate mixed-domain data, enabling the model to learn correlations and features between data from different domains and improving its generalization ability in cross-domain few-shot learning tasks. Secondly, a feature decoupling module based on the self-attention mechanism is proposed to extract domain-independent features and domain-related features, allowing the model to further reduce the domain distribution gap and effectively generalize source domain knowledge to the target domain. Then, the model parameters are optimized through a multi-task learning mechanism consisting of sample classification tasks and domain classification tasks. Finally, applications in classification tasks on multiple sets of equipment fault datasets show that the proposed method can significantly improve the fault recognition ability of the diagnosis model under the conditions of large distribution differences in the target domain and scarce labeled samples.
26 April 2022 in The International Journal of Advanced Manufacturing Technology
With the development of deep learning, face inpainting has been significantly enhanced in the past few years. Although image inpainting framework integrated with generative adversarial network or attention mechanism enhanced the semantic understanding among facial components, the issues of reconstruction on corrupted regions are still worthy to explore, such as blurred edge structure, excessive smoothness, unreasonable semantic understanding and visual artifacts, etc. To address these issues, we propose a Learnable Structure Knowledge of Fusion Network (LSK-FNet), which learns a prior knowledge by edge generation network for image inpainting. The architecture involves two steps: Firstly, structure information obtained by edge generation network is used as the prior knowledge for face inpainting network. Secondly, both the generated prior knowledge and the incomplete image are fed into the face inpainting network together to get the fusion information. To improve the accuracy of inpainting, both of gated convolution and region normalization are applied in our proposed model. We evaluate our LSK-FNet qualitatively and quantitatively on the CelebA-HQ dataset. The experimental results demonstrate that the edge structure and details of facial images can be improved by using LSK-FNet. Our model surpasses the compared models on L1, PSNR and SSIM metrics. When the masked region is less than 20%, L1 loss reduce by more than 4.3%.