Fused deposition modeling (FDM) is one of the most accessible additive manufacturing (AM) technologies for processing polymeric materials. It allows processing most of thermoplastic polymers, with polyethylene terephthalate glycol-modified (PET-G) and polylactic acid (PLA). AM parts tend to display anisotropic behavior because of layer-by-layer fabrication and various technological parameters that can be set for 3D print, so it is hard to predict and analyze how the manufactured parts would behave under load. This research presents results of classic tensile strength tests performed on 57 PET-G specimens and 57 PLA specimens manufactured with varying technological parameters such as: printing temperature, print orientation, layer height, and infill percentage. Afterward, a comparative analysis is performed, proposing specific tensile strength (STS) as a benchmark to determine how 3D printed parts strength is varying due to beforementioned parameters, eliminating bias induced by varying weight of specimens. The biggest relative increase of UTS and the biggest relative decrease of STS was noted for variable infill percentage (increasing infill—PLA: 37.27% UTS increase and 30.41% STS decrease; PET-G: 24.42% UTS increase and 37.69% STS decrease). The biggest relative increase of STS between examined parameters was observed for both materials as the printing temperature was increased (27.53% for PLA and 12.69% for PET-G). Similar trends in STS changes were observed for both materials. Obtained data shows which FDM AM parameters are the most important to obtain the biggest UTS of manufactured parts, and those do not overlap with parameters needed to obtain optimal strength-to-weight ratio.

Whey is a byproduct of dairy production that possesses high nutritional value and versatile applications across various industries. In the framework of circular economy, the reutilization of whey is essential to transform this high-volume byproduct into a valuable resource. In this narrative review, the authors focus on trends in the utilization of whey for manufacturing functional and nutritional beverages. This publication summarizes the current information on whey composition based on various influencing factors and explores the technological processes currently used in whey-based beverage production and analysis, as well as nutritional profiles and properties of whey-based drinks with functional modifiers. Information about whey processing methods, compositional profiles, and whey-based beverages’ health benefits along with the author-proposed typology of functional drinks are summarized in tables throughout the paper.

The Jerusalem artichoke (Helianthus tuberosus) is a high-yield crop, and a great source of fermentable sugars, which gives the plant the potential to be used as raw material for economical fuel alcohol production. In this article, the authors focus on the technological aspect of the biofuel manufacturing process and its properties. First, the fuel alcohol manufacturing process is described, afterwards assessing its characteristics such as kinematic viscosity, density and octane number. The amount of fuel alcohol obtained from 10 kg of biomass equals to 0.85 L. Afterwards, the mixtures of gasoline and obtained fuel alcohol are prepared and studied. Optimal alcohol and gasoline mixtures are determined to obtain biofuels with octane ratings of 92, 95 and 98. The kinematic viscosity of obtained mixtures does not differ significantly from its values for pure gasoline. The obtained biofuel mixture with 25% alcohol content yielded a decrease of sulfur content by 38%, an increase of vaporized fuel amount by 17.5% at 70 °C and by 10.5% at a temperature of 100 °C, which improves engine startup time and ensures its stable operation in comparison to pure gasoline. The alcohol obtained can be successfully used as a high-octane additive for gasolines.

A systematic study of the influence of synthesis conditions on the structural, morphological, and electrical properties, as well as the electrochemical performance of hemp fiber-derived carbon materials was performed. An analysis of the capacitive response of carbons obtained under various activation conditions with additional treatment with HNO₃ and annealing was completed. The contribution of the formation of an electrical double layer at the outer electrode–electrolyte interface, as well as on surfaces inside micropores, has been studied and analyzed in terms of the effect of the turbostratic carbon properties (average lateral size of graphite crystallites, pore size distribution, BET surface area).

Actions aimed at improving the energy performance of buildings increase the share of heat loss through thermal bridges and windows in a building's energy balance. This is especially true of buildings currently under construction. In addition, it is known that the correct installation of windows...