The global increase in energy demand and exponential exhaustion of fossil recourses has favored the development of new systems of electricity production. Photovoltaic solar energy is undoubtedly one that has the highest application in housings, due to its simplicity and easy implementation. In this work, a new prototype of photovoltaic solar tracker with Arduino platform was developed. Feedback control system that allows carrying out solar tracking with two axes using a stepper motor and linear actuator was established through an electronic circuit based on photodiodes. Moreover, real construction of the prototype was carried out, where the effectiveness of the design and its capacity to draw a maximum benefit of an incident radiation can be observed, placing the panel perpendicularly to the received energy and improving its performance for its application in future installations in housings. Results obtained from the comparison between the developed prototype and a static panel oriented according to the latitude of the area, show about 18% energy gain.

The reuse and recycling of construction and demolition waste is becoming an advisable choice to reduce the consumption of key raw materials and the environmental impact generated by the construction of new buildings. This study proposes the introduction of two new stages of recycled aggregate processing that allow redesigning the production process of recycled aggregates towards a more sustainable and eco-friendly system: sieving with secondary crushing and washing. Based on an experimental study, our findings show that the new stages reduce significantly the content of impurities and the water absorption of recycled aggregates, obtaining a better final product (i.e. cement mortar) for buildings. Moreover, the new final product made with treated recycled aggregates also experiences significant improvements in their physical and mechanical properties (i.e.: increased on average, 5% in flexural strength, 6% in compression strength and reduced shrinkage by 2%), in turn reducing both the costs associated with the manufacture of the new product and its environmental impact compared to other products that solely include untreated recycled aggregates. The potential economic and solid waste management implications for firms that choose to deploy the new production system depicted are also discussed.

The high demand for natural resources and increased industrial activity is driving the construction sector to search for new, more environmentally friendly materials. This research aims to analyse plaster mortars with the incorporation of construction and demolition waste (CDW) to move towards a more sustainable building sector. Three types of aggregates (natural, recycled concrete and recycled from ceramic walls) and two types of insulation waste (expanded polystyrene with graphite and mineral wool) have been added to the plaster matrix to evaluate its mechanical and physical properties and its suitability in the elaboration of prefabricated materials. The results show how plaster mortars made with recycled aggregates have higher mechanical resistance than conventional plaster without incorporating sand. The incorporation of crushed mineral wool residues improves the flexural strength of plaster mortars and their application in the execution of prefabricated panels. Likewise, the expanded polystyrene residues reduce the final density of mortars, improving their behaviour against water absorption and reducing the final thermal conductivity of plaster material.

The reuse of construction and demolition waste is a necessary way to achieve greater sustainability in building, introducing the criteria of the so-called circular economy in the design of the production process of new construction materials. This research focuses on analyzing the properties of mortars made with recycled aggregates from concrete waste and reinforced with aramid fibers. For this purpose, an experimental campaign was carried out, including chemical, physical, mechanical and durability tests, performing a statistical analysis to discuss the different properties analyzed. The results show how the incorporation of aramid fibers in the matrix of cement mortars made with recycled concrete aggregate improves their technical performance and mechanical resistance, thus increasing their application possibilities and achieving similar results in some properties to those obtained with traditional mortars made with natural aggregate.

Achieving sustainable management and efficient use of natural resources stands out as one of the goals included in the Goals for Sustainable Development in the 2030 Agenda. The construction sector is currently far from presenting an efficient model in terms of treating waste generated by it. Variations in the physical and chemical properties of recycled aggregates coming from construction and demolition waste are one of the main reasons of their limited use in the production of construction materials. This research presents a physicochemical characterization of three different types of recycled aggregates coming from different types of waste: concrete, ceramic and mixed. Physical characterization shows that recycled concrete aggregate has better physical properties compared with mixed recycled aggregate and ceramic recycled aggregate, which makes it more suitable for use in masonry mortars and concrete, due to its higher dry density (2210.33 kg/m³), its lower content of fines (5.17%), its lower friability coefficient (24.60%), and its water absorption coefficient (6.70%). Chemical characterization shows that none of the tested recycled aggregates contains traces of harmful chemical agents that exceed the limits established by the reference regulations. Finally, the statistical analysis shows good homogeneity for these raw materials, obtaining low coefficients of variation and values within the recommended in each of the calculated confidence intervals.

Construction and demolition waste can be used as a substitution of natural aggregate in mortar and concrete elaboration. A poorer quality of recycled aggregates generally has negative impact on mortar properties. Shrinkage is one of the properties that experiences worse outcome due to the higher absorption of recycled aggregates. This research evaluates the potential shrinkage of mortars elaborated with recycled concrete aggregates both with and without fibres addition, as well as the relation between moisture loss and shrinkage caused by mortar drying process using a capacitive sensor of the authors’ own design. Two different mortar dosages 1:3 and 1:4 and three fiber types: polypropylene fiber, fiberglass and steel fiber, in different proportions were used. Obtained results show that the use of polypropylene fiber improves the recycled mortars performance against shrinkage in 0.2%. Moreover, a clear relation between dry shrinkage and moisture loss was observed.