Maroay Phlernjai

Dr. Maroay Phlernjai


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2022 in Drones
Verified
Journal Article
Open access
PDF file
Sudam Chamikara Chamikara De SilvaSudam Chamikara Chamikara De Silva
Sudam Chamikara Chamikara De Silva
MPMaroay Phlernjai
Maroay Phlernjai
SRSuchada Rianmora
Suchada Rianmora
PRPhotchara Ratsamee
Photchara Ratsamee
“Flight Time” and the “Scope of the mission” play major roles in using UAVs as they affect most industrial activities. Once the battery has depleted, the UAV has to land on the ground and human interaction is needed to change the battery with a fully charged one. Nowadays, several automatic battery swapping systems are catching interest in research. This research presents the novel concept of an Inverted Docking Station that allows a quadrotor UAV to attach to the ceiling during the automatic battery-swapping process. The proposed design consist of a docking station, a positioning system and gripper mechanisms. The proposed design allows the quadrotor to carry the load under the quadrotor and remain attached throughout the servicing period. A mathematical model and design guideline have been proposed, and a Finite Element Analysis (FEA) was performed to check that the developed platform is strong enough to withstand the above task. A ‘DJI TELLO’ small-scale quadrotor was chosen as a case study to demonstrate the proposed research. Finally the advantages and the limitations of the system are discussed.

16 December 2023 in Engineering Science and Technology, an International Journal
Verified
Journal Article
Open access
RTRoshan Thilakarathna
Roshan Thilakarathna
MPMaroay Phlernjai
Maroay Phlernjai

20 June 2022 in Journal of Robotics and Mechatronics
Verified
Journal Article
Open access
MPMaroay Phlernjai
Maroay Phlernjai
PRPhotchara Ratsamee
Photchara Ratsamee
The monitoring and inspection of buildings, towers, and large chemical tanks can be dangerous and costly. A wall climbing multi-legged robot can climb and crouch to move the inspection probe closer to the wall surface. The typical wall-sticking crouching motion of multi-legged robot is unable to achieve this without an additional actuator at the foot base. This limits the design of a magnetic leg that is bulky enough to keep the robot stable during inspections. This paper provides the concept and implementation details of a coarse-to-fine inspection using a novel twisting motion to crouch the robot towards the steel surface without the need for an additional actuator at the magnetized foot joint. The center position error of this method is reported as less than 1 cm in radius. Additionally, this paper suggests using a linear motor to provide fine-tuning capability for the gentle touch of the ultrasonic inspection probe to the steel surface, protecting the probe from a direct crash during the coarse twisting crouch movement. Experiments have been conducted to confirm the validity of this concept on horizontally flat steel plates. The robot successfully crouch towards the surface and gently touch it with the ultrasonic probe. The results were reliable and comparable to manual inspection. For the 2 mm and 3 mm sample plates, the average measurement error compared to the ground truth from a vernier caliper was less than 2%, which is better than the measurement error (3%) of humans. The total time used was 2.475 seconds per inspection spot, which is 5.6 times faster compared to the expected time used to cover the same distance with a typical probe extension using a lead screw drive.

9 February 2026 in IEEE Access
Verified
Journal Article
Open access
SSSudam Chamikara de Silva
Sudam Chamikara de Silva
MPMaroay Phlernjai
Maroay Phlernjai
Ceiling Effect is a significant factor for Unmanned Aerial Vehicle (UAV) missions that require close flight in the proximity of a top planar boundaries such as inverted docking, perching, and flight in a confined space. In this study, the ceiling effect on five different propellers (4.7, 5.5, 8.0, and 9.0 inches of diameter) of a both small and larger-types of UAVs was studied using an experiment setup based on the normalized thrust, with different propeller speeds ranging from 5000-9000 RPM and normalized distance to radius ratio ( $z/R$ ). The result shows a significant deviation from the existing mathematical models: Cheeseman and Bennett, Hayden’s and Conyer’s, especially in the extremely near ceiling region ( $z/R\lt 0.25$ ). Data fitting method using the ‘Skewed-Normal distribution’ was used to analyze the data set of these five propellers. It was identified that the fitting method potentially captures the peak thrust for each propeller compared to the existing theoretical models. Further, each coefficient in the skewed-normal fitting equation was compared with the diameter and the pitch of the same sets of propellers. The results show a more accurate thrust calculation due to the ceiling effect, with the R-squared of >0.90 in most cases, compared to the existing models. This study aims to provide more understanding of such extreme effects on a single-rotor model, opening paths for proposing the empirical mathematical model and thus possibly expanding to multi-rotor UAVs of different sizes in future research.

5 June 2017 in ROBOMECH Journal
Verified
Journal Article
Open access
PDF file
MPMaroay Phlernjai
Maroay Phlernjai
TTToshio Takayama
Toshio Takayama
This paper introduces a novel gear–clutch mechanism that takes advantage of the difference between the directions in the reaction forces that occur during meshing and jamming to ensure jam-free engagement of the gears. The proposed mechanism is a more compact advancement of the previously developed linear rack-tilting clutch used to provide a step change in the reduction ratio. Mathematical models of the jam-free and stable meshing condition of the proposed mechanism are developed and experimentally verified, along with a discussion and recommendations to be considered as design guidelines. Additionally, a singularly actuated robotic joint prototype is developed to examine the performance of the proposed clutch mechanism. The joint was driven by a small 2-W DC motor. The maximum output torque was 4 Nm with a maximum travel range of over 200\(^\circ\) during the high-force phase, and the maximum speed was 252\(^\circ\)/s with an infinite travel range during the high-speed phase. The mechanism exhibits potential for applications that benefit from a step transmission and long force-exerting travel range such as vices, grippers, and industrial punching and shearing machines, as well as robotic arms and power assist exoskeletons.

30 November 2023
Verified
Conference Paper
Closed access
PDF file
PSPongpop Sukanunta
Pongpop Sukanunta
SJSarinya Jitklongsub
Sarinya Jitklongsub
MPMaroay Phlernjai
Maroay Phlernjai
APApirat Prasit
Apirat Prasit
WWWeerapot Wanajaroen
Weerapot Wanajaroen
PCPearachad Chartsiriwattana
Pearachad Chartsiriwattana
Achieving precise tolerances in the assembly of optical components is crucial for the performance of off-axis optical systems. This study focuses on the design and evaluation of assembly methods and mechanisms of an Offner spectrometer with the goal of demonstrating their capability to achieve tolerances within 40 microns. The methodology involves the development of assembly methods and mechanisms specifically tailored for off-axis optical systems. Representative models of optical components and custom adaptors were designed and manufactured to facilitate the assembly process. Procedures were devised for setting up, repositioning, and locking the representative models. The proposed methods and mechanisms were evaluated using measurements from a Coordinate Measuring Machine (CMM). The accumulated tolerance in each step of the assembly process was analyzed, ensuring that the overall performance met the desired specifications. The findings validate the effectiveness and reliability of the developed approach, offering valuable insights for the design and implementation of similar systems.