Summary: Understanding proppant-transport and -deposition patterns in a hydraulic fracture is vital for effective and economical production of petroleum hydrocarbons. In this research, a numerical-modeling approach, combining the discrete-element method (DEM) with single-/multiphase lattice Boltzmann (LB) simulation, was adopted to advance understanding of the interaction between reservoir depletion, proppant-particle compaction, and single-/multiphase flows in a hydraulic fracture. DEM was used to simulate effective-stress increase and the resultant proppant-particle movement and rearrangement during the process of reservoir depletion caused by hydrocarbon production. Simulated pore structure of the proppant pack was extracted and used as boundary conditions in the LB simulation to calculate the time-dependent permeability of the proppant pack. We first validated the DEM-LB numerical work flow, and the simulated proppant-pack permeabilities as functions of effective stress were in good agreement with laboratory measurements. Furthermore, three proppant packs with the same average particle diameter but different diameter distributions were generated to study the role of proppant-size heterogeneity (variation in particle diameter). Specifically, we used the coefficient of variation (COV) of diameter, defined as the ratio of standard deviation of diameter to mean diameter, to characterize the heterogeneity of particle size. We obtained proppant-pack porosity, permeability, and fracture-width reduction (closure distance) as functions of effective stress. Under the same effective stress, a proppant pack with a higher diameter COV had lower porosity and permeability and larger fracture-width reduction. This was because the high diameter COV gave rise to a wider diameter distribution of proppant particles; smaller particles were compressed into the pore space between larger particles with increasing stress, leading to larger closure distance and lower porosity and permeability. With multiphase LB simulation, relative permeability curves were obtained, which are critical for larger-scale reservoir simulations under various effective stresses. The relative permeability of the oil phase was more sensitive to changes in geometry and stress, compared with the wetting phase. This was because the oil phase occupied larger pores; compaction of the proppant pack affected the structure of the pores, because the pores were farther from the grain contacts and thus more susceptible to collapse. It is also interesting to note that when effective stress increased continuously, oil relative permeability increased first and then decreased. This nonmonotonic behavior was the result of the nonmonotonic development of pore structure and oil connectivity under increasing stress.
Summary: Optimizing proppant-pack conductivity in a hydraulic fracture is of critical importance to sustaining effective and economical production of petroleum hydrocarbons. In this study, a hybrid, experiment/simulation-integrated workflow, which combines the discrete element method (DEM) and the lattice Boltzmann (LB) method with laboratory-measured load-embedment correlations, was developed to advance the understanding of fracture-conductivity evolution from partial-monolayer to multilayer concentrations. The influence of compressive stress and proppant-diameter heterogeneity on non-Darcy flow behaviors was also investigated. The DEM method was used to simulate effective-stress increase and the resultant proppant-particle compaction and rearrangement. Proppant-embedment distance was then determined using an empirical correlation obtained by fitting experimental data. The final pore structure of the proppant pack was imported into the LB simulator as interior boundary conditions of fluid-flow modeling in the calculation of time-dependent permeability of the proppant pack. To validate the integrated workflow, proppant-pack conductivity as a function of increasing proppant concentration was simulated and then compared with laboratory data. Good agreement was observed between the workflow-derived and laboratory-measured fracture-conductivity vs. proppant-concentration curves. Furthermore, the role of proppant size, size heterogeneity, and closure pressure on the optimal partial-monolayer proppant concentration was investigated. The optimal partial-monolayer proppant concentration has important engineering implications, because one can achieve a considerable fracture conductivity using a partial-monolayer proppant structure, which has much lower material costs compared with the conventional multilayer proppant structures. To investigate the effect of non-Darcy flow on fracture conductivity, three proppant packs with the same average diameter but different diameter distributions were generated. Specifically, the coefficient of variation (COV) of diameter, defined as the ratio of standard deviation of diameter to mean diameter, was used to characterize the heterogeneity of particle size. The results of this research provide fundamental insights into the multiphysics processes regulating the conductivity evolution of a proppant-supported hydraulic fracture, as well as the role of compressive stress and proppant-size heterogeneity in non-Darcy flows.
Summary: With the advancement of drilling and completion technologies in unconventional reservoirs, more extended reach wells are developed, and narrow-fracture environments are created in these reservoirs. Proppant embedment in monolayer/thin-layer-propped fractures can be significantly different from multilayer-propped fractures. In this study, a comprehensive investigation combining laboratory experiments with numerical simulations was conducted to explore the factors affecting proppant embedment and induced fracture conductivity loss in narrow fractures. The fracture-conductivity experiments were performed using monolayers of sand and ceramic proppant particles sandwiched between Berea Sandstone and Eagle Ford Shale plates under different closure pressures. The experiment study demonstrated that the long-term rock/fluid interaction leads to significant proppant embedment, and the fracture having a rough rock surface has higher fracture conductivity in monolayer-propped fractures. To further quantify the influence of proppant layer number, size, distribution variations, and particle crushing on proppant embedment, a numerical modeling approach that coupled continuum mechanics, discrete element method (DEM), and the lattice Boltzmann (LB) method was developed. In the simulation, the fracture/proppant system was constructed by filling proppant, modeled by DEM, between two fracture surfaces that were modeled by FLAC3D (Itasca Consulting Group 2012); LB simulation was then performed on the changing proppant pack to compute its time-dependent permeability. The numerical model was validated by comparing numerical results with measured fracture conductivities in the laboratory experiment. The simulation results demonstrated a strong correlation between proppant embedment and rock mechanical properties. When the Young’s modulus of the rock plate is less than 5 GPa, large magnitudes of proppant embedment can be expected in fractures supported by monolayers of ceramic proppant particles. Moreover, large-size proppant particles are more sensitive to the variations of Young’s modulus of the rock plate. When the rock formation in a narrow fracture environment has a relatively high Young’s modulus, the proppant diameter distribution has a lesser effect on the fracture conductivity. The outcome of this study will provide insights into the role of reservoir rock characteristics, proppant properties, and closure pressure on proppant embedment in narrow fractures.
6 April 2020 in Construction and Building Materials