Qiaoyun Liu

Dr. Qiaoyun Liu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
XFXinxin Fu
Xinxin Fu
YLYan Liu
Yan Liu
Qiaoyun LiuQiaoyun Liu
Qiaoyun Liu
Zhongyi LiuZhongyi Liu
Zhongyi Liu
ZPZhikun Peng
Zhikun Peng
Biomass plays an important role in the green manufacture of high value-added chemicals. Among them, the conversion of furfural (FFA) into 2-methylfuran (2-MF), catalyzed by a copper-chromium catalyst, is important in its industrial application. However, the use of chromium is limited due to its toxicity and pollution of the environment. In this paper, a Cu/SiO2 catalyst, prepared by the ammonia evaporation method, shows a better catalytic performance compared with that prepared by the co-precipitation method for the vapor-phase hydrodeoxygenation of FFA. The selectivity of 2-MF is higher than 80% with almost a complete conversion of FFA. Combined with the characterizations, the superiority of the ammonia evaporation method is attributed to the reduction of highly dispersed copper species and the increased Cu+/(Cu+ + Cu0) ratio due to the formation of a large content of copper phyllosilicate during the preparation. Moreover, Cu+ sites can act as a weak acid site, which improve the surface acidity of the catalyst and facilitate the formation of 2-MF. This new catalytic system provides a feasible and promising strategy for the industrial preparation of 2-MF from FFA, and effectively utilizes biomass resources to promote the development of biomass industry.

27 March 2024 in Catalysts
Verified
Journal Article
Open access
PDF file
YYyuhao yang
yuhao yang
Qiaoyun LiuQiaoyun Liu
Qiaoyun Liu
Zhongyi LiuZhongyi Liu
Zhongyi Liu
The catalytic conversion of naturally rich and renewable biomass into high-value chemicals is of great significance for pursuing a sustainable future and a green economy. The preparation of pentanediol from furfuryl alcohol is an important means of high-value conversion of biomass. The Pt-based catalyst supported on MgO was applied to the selective hydrogenation of biomass furfuryl alcohol to prepare pentanediol. By adjusting parameters such as catalyst loading, reduction temperature, reaction temperature, and pressure, a highly active catalyst was designed and the optimal catalytic hydrogenation conditions were determined. The hydrogenation experiment results showed that the selectivity of the 2Pt/MgO-200 catalyst for 1,2-pentanediol and 1,5-pentanediol reached 59.4% and 15.2%, respectively, under 160 °C and 1 MPa hydrogen pressure. The catalyst was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), CO2-temperature programmed desorption (CO2-TPD), and other methods. The characterization results indicate that the reduction temperature has a significant impact on the metal Pt, and an appropriate reduction temperature is beneficial for the hydrogenation performance of the catalyst. In addition, the basic sites on the carrier are also another important factor affecting the activity of the catalyst. In addition, stability tests were conducted on the catalyst, and the reasons for catalyst deactivation were studied using methods such as thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The results showed that the activity of the catalyst decreased after five cycles, and the deactivation was due to the hydrolysis of the carrier, the increase in metal particle size, and the surface adsorption of organic matter.

8 January 2025 in Molecules
Verified
Journal Article
Open access
PDF file
JWJieqiong Wang
Jieqiong Wang
JYJingyi Yang
Jingyi Yang
ZBZezheng Bing
Zezheng Bing
YGYuanyuan Gao
Yuanyuan Gao
TYTao Yang
Tao Yang
Zhongyi LiuZhongyi Liu
Zhongyi Liu
Controllable hydrogenation of carbonyl groups (C=O) is crucial for converting furfural into high-value furfuryl alcohol. Instead of traditional impregnation method, a novel Cu-based catalyst (Cu/SiO2) is prepared using the ammonia evaporation method (AE) for the efficient hydrogenation of furfural to furfuryl alcohol under mild conditions. At the reaction conditions of 90 °C and 1 MPa H2, the 5Cu/SiO2-AE sample showed optimal performance with higher turnover frequency (36.0 h−1) and furfuryl alcohol selectivity (>99.9%). After five cycles, the catalyst recycled still showed a high reaction activity and selectivity for furfuryl alcohol. Characterization results such as XRD, H2-TPR, FT-IR, and XPS showed that the excellent catalytic performance of 5Cu/SiO2-AE catalyst was attributed to the formation of layered copper silicate and the high dispersion of Cu species. Furthermore, the formation of layered copper silicate resulted in a higher ratio of Cu+/(Cu0+Cu+) at a reduction temperature of 250 °C, which was also responsible for the optimum activity. This work showed the importance of controllable synthesis of layered copper silicate in improving the catalytic performance of copper-containing catalyst.

5 December 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
YGYuanyuan Gao
Yuanyuan Gao
JWJieqiong Wang
Jieqiong Wang
Zhongyi LiuZhongyi Liu
Zhongyi Liu
SLShuaihui Li
Shuaihui Li
Qiaoyun LiuQiaoyun Liu
Qiaoyun Liu
Furfural (FAL), an important biomass-derived platform molecule, plays a vital role in bridging biorefineries and the production of high-value chemicals through its selective hydrogenation to furfuryl alcohol (FOL). In this work, a series of Cu-based bimetallic catalysts (Cu5Nix/SiO2) were prepared by a simple impregnation method and exhibited outstanding catalytic performance for the hydrogenation of furfural under the mild conditions. When the loading of Ni was 2 wt%, the optimal catalytic activity was obtained at 150 °C and 1 MPa H2, achieving a furfural conversion of 97.3%. This catalyst also showed excellent stability, maintaining high activity and selectivity toward FOL after five consecutive reaction cycles. Structural characterizations using X-ray diffraction (XRD), Hydrogen temperature-programmed reduction (H2-TPR), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) revealed strong electronic interactions between Cu and Ni species. The introduction of Ni promoted the reduction of Ni2+ and improved the dispersion of Cu, which in turn increased the number of accessible active sites and facilitated the hydrogenation process. This synergistic effect between Cu and Ni provides an efficient and low-cost strategy for the selective hydrogenation of biomass-derived furfural to high-valued chemicals.

17 April 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
ZBZezheng Bing
Zezheng Bing
YGYuanyuan Gao
Yuanyuan Gao
Zhongyi LiuZhongyi Liu
Zhongyi Liu
Qiaoyun LiuQiaoyun Liu
Qiaoyun Liu
Biomass, as a renewable carbon resource, holds broad application prospects. Among various bio-based platform molecules, furan derivatives play a significant role in green chemical production. Notably, the conversion of 2-methylfuran (2-MF) to 3-acetyl-1-propanol (3-AP) over bifunctional catalysts has attracted considerable interest. In this study, a Pd@PHZSM-5 catalyst was prepared by encapsulating Pd nanoparticles within P-doped HZSM-5 for 2-MF conversion. The encapsulation improved Pd dispersion and metal–acid synergy, enhancing both catalytic activity and 3-AP selectivity. Additionally, phosphorus doping increased HZSM-5 crystallinity, resulting in excellent stability. This work provides a feasible strategy for optimizing metal–acid cooperation, offering theoretical guidance for bifunctional catalysis and biomass valorization.

2 March 2026 in Catalysts
Verified
Journal Article
Open access
PDF file
元胡元鼎 胡
元鼎 胡
YGYuanyuan Gao
Yuanyuan Gao
JZJiawen Zhang
Jiawen Zhang
Zhongyi LiuZhongyi Liu
Zhongyi Liu
Qiaoyun LiuQiaoyun Liu
Qiaoyun Liu
3-Acetyl-1-propanol (3-AP) is a key intermediate in the pharmaceutical and pesticide industries, which can be synthesized from the biomass derivative 2-methylfuran (2-MF) through a one-step hydrogenation process with significant economic and environmental benefits. Zeolite-supported metal catalysts showed feasible application, but simply regulating the acidic sites was difficult to break the activity–selectivity balance. Traditional single-metal Pd-based catalysts still suffer from low dispersion. This study constructed the PdZn/TS-1 catalyst for the efficient conversion of 2-MF into 3-AP. The low electronegativity of Zn facilitates the electron transfer from Zn to Pd, forming an electron-rich Pd active center. A small amount of Zn embedded in the Pd lattice causes lattice contraction, optimizing the spatial configuration of active sites. The synergy between the electronic and structural effects significantly improves catalytic performance. Under optimized conditions, the conversion rate of 2-MF reached 80.6%, and the yield of 3-AP reached 69.1%, providing a new paradigm for the design of catalysts for the directed hydrogenation of furan derivatives.