Worldwide, asset managers are struggling with the management of ageing infrastructure in reinforced concrete. Early detection of reinforcement corrosion, which is generally considered as the major problem, can help to perform dedicated maintenance and repair. The acoustic emission technique is promising to reach this goal. However, research on the characterisation of the different damage sources during corrosion in reinforced concrete remains scarce. In this article, the characterisation of damage processes is investigated on small reinforced concrete prisms and upscaled to reinforced concrete beams under accelerated conditions in a laboratory environment. Damage sources are assigned based on careful validation with crack width measurements and dummy samples. Signals originating from different acoustic emission sources are compared in the time and frequency domain. Moreover, the continuous wavelet transform is applied to provide information on time–frequency characteristics. The results show that the moment of concrete macro-cracking can be derived from a sudden increase of the cumulative acoustic emission events and cumulative acoustic emission energy. However, validation with crack measurements is required. The shift in both peak and centre frequency of the acoustic emission signals is found to be a better indicator. Wavelet transform allows to distinguish acoustic emission sources when frequency ranges are overlapping. Possible acoustic emission sources such as the corrosion process and concrete cover cracking, are successfully assigned. The major contributions of this article are the characterisation of acoustic emission sources from corrosion damage in reinforced concrete, validation with crack measurements and dummy samples, as well as a dedicated wavelet analysis.
2 August 2024 in Construction and Building Materials
Corrosion of the reinforcement is a major degradation mechanism affecting durability and safety of reinforced concrete (RC) structures. As the corrosion process starts internally, it can take years before visual damage can be noticed on the surface, resulting in an overall degraded condition and leading to large financial costs for maintenance and repair. The acoustic emission (AE) technique enables the continuous monitoring of the progress of internal cracking in a non-invasive way. However, as RC is a heterogeneous material, reliable damage detection and localization remains challenging. This paper presents extensive experimental research aiming at localizing internal damage in RC during the corrosion process. Results of corrosion damage monitoring with AE are presented and validated on three sample scales: small mortar samples (scale 1), RC prisms (scale 2), and RC beams (scale 3). For each scale, the corrosion process was accelerated by imposing a direct current. It is found that the AE technique can detect damage earlier than visual inspection. However, dedicated filtering is necessary to reliably localize AE events. Therefore, AE signals were filtered by a newly developed post-processing protocol which significantly improves the localization results. On the smallest scale, results were confirmed with 3D micro-CT imaging, whereas on scales 2 and 3, results were compared with surface crack width measurements and resulting rebar corrosion levels.