The study of charge carrier transport at nanoscale electrical contacts is crucial for the development of next-generation electronics. This paper reviews recent modeling efforts on quantum tunneling, current crowding, and contact resistance across electrical interfaces with nanometer scale dimensions. A generalized self-consistent model for quantum tunneling induced electron transport in metal–insulator–metal (MIM) junctions is summarized. Rectification of a dissimilar MIM junction is reviewed. A modified two-dimensional (2D) transmission line model is used to investigate the effects of spatially varying specific contact resistivity along the contact length. The model is applied to various types of electrical contacts, including ohmic contacts, MIM junction based tunneling contacts, and 2D-material-based Schottky contacts. Roughness engineering is recently proposed to offer a possible paradigm for reducing the contact resistance of 2D-material-based electrical contacts. Contact interface engineering, which can mitigate current crowding near electrical contacts by spatially designing the interface layer thickness or properties, without requiring an additional material or component, is briefly reviewed. Tunneling engineering is suggested to eliminate severe current crowding in highly conductive ohmic contacts by introducing a thin tunneling layer or gap between the contact members. Unsolved problems and challenges are also discussed.
Highly conductive nanoscale electrical contacts suffer from strong current crowding at the contact edges, which can lead to nonuniform heat deposition; the formation of local hot spots, aggravation of electromigration; and, in the worst-case scenario, lead to thermal runaway and breakdown of the device. These effects severely affect the overall device properties, reliability, and lifetime. Devices based on thin-film junctions, nanotubes or nanowires, and two-dimensional (2D) materials are especially sensitive to current transport at electrical contacts, due to their reduced dimensions and increased geometrical confinement for current flow. Here, we demonstrate a method to mitigate current crowding, by engineering the interface layer properties and geometry. Based on a self-consistent transmission-line model, we show that the distribution of the contact current greatly depends on the properties of the interfacial layer between two contacting members. Current steering and redistribution can be realized by strategically designing the specific contact resistivity, , along the contact length. For similar contact members, parabolically varying along the contact interface significantly reduces the edge-current crowding in ohmic contacts. Similarly, the nonuniform current distribution of 2D semiconductor-3D metal contacts can be decreased, and the current-transfer length can be increased by varying the Schottky barrier height along the interface. It is also found that introducing a nanometer- or subnanometer-scale thin insulating tunneling gap between contact members can greatly reduce current crowding, while maintaining a similar total contact resistance.
22 February 2024 in IEEE Transactions on Nuclear Science
We have studied the neutron displacement damage effect in bipolar junction transistors (BJTs) isolated from an integrated circuit (IC) through experiment and modeling. Both vertical npn and lateral pnp BJTs were isolated from a LM741 linear bipolar integrated circuit and underwent 14-MeV neutron irradiation. Measured Gummel curves reveal that, in addition to the expected increase in base currents with increasing neutron fluence, the ideality factors of the Gummel curves increase with fluence for the npn, but decrease with fluence for pnp. To understand this response, detailed TCAD simulations were performed. Simulation results not only reproduce the measured Gummel curves, but more importantly they reveal that the total recombination ratio between the emitter-base (EB) depletion region (DR) and the neutral base (NB) appears to be responsible for the changing of ideality factor with neutron fluence. Specifically, for vertical npn, recombination in the EB DR is much more dominant than that in the NB for all the fluences considered, which leads to increasing ideality factor with increasing fluence. On the contrary, for lateral pnp, recombination in the DR is the strongest for the lowest fluence and its contribution becomes smaller with increasing fluence than the recombination in the NB, which leads to decreasing ideality factor with increasing fluence.
Terahertz scanning tunneling microscopy (THz-STM) has enabled spatiotemporal imaging with femtosecond temporal resolution and angstrom spatial resolution. In THz-STMs, the junction bias is modulated by coupling THz pulses, which results in transient voltage bias and extremely high transient tunneling currents. In order to have efficient imaging of the sample surface, it is important to understand the nonlinear tunneling current response and its parametric dependence. In this work, we theoretically investigate the basic scaling of rectified electrons in a THz-STM junction. We use a self-consistent quantum model that includes both space-charge potential and exchange-correlation potential, which were ignored in previous studies. Since THz-STMs are operated at high transient voltage in field emission regime, the effects of exchange-correlation potential become crucial. We validate our calculation with recently reported experimental data and investigate the rectification property of the tip-sample junction for different parameters. We find that the time-dependent tunneling current and the electron transport can be manipulated by varying the dc bias voltage (polarity, amplitude), incident THz field (polarity, shape, peak amplitude), work functions of STM tip and sample—especially their difference , and the tip-sample separation. Our study provides an important framework that can be used in the future to characterize, control, and improve THz-induced currents and probing techniques at the nanometer scale over subpicosecond time periods.
13 January 2025 in IEEE Transactions on Nuclear Science
The space flight data from the NASA Living with a Star (LWS) program raise questions about the basic mechanisms of radiation damage on gated lateral PNP (GLPNP) bipolar transistors (BJTs). Differences in oxide thicknesses and the presence of the gate terminal on the BJT devices under tests enable deeper analysis of the effects of space radiation damage. The data presented herein show a noticeable split in base current ( IB ) between the thick and thin oxide devices under 0 V gate bias measurement and a reduction of the split when -12 V gate bias is applied during measurement. This paper analyzes the IB behavior with TCAD simulations. The postirradiation simulation structure takes into account the combination of oxide trapped charge ( Not ) and interfaces traps ( Nit ), and reduction in minority carrier lifetimes (τ) for ionization and displacement damage, respectively. Due to the difference in oxide thickness of the BJTs, the density of oxide charges ( Not ) and the interface traps ( Nit ) from ionization damage will be different, thus the data under 0 V gate bias is expected. To understand the reduction in IB split at -12 V gate bias, the gate sweep technique is employed to explain the effect of radiation on the base current under gate bias.
Advancements in soft robotics and wearable technologies have led to an increased need for flexible and stretchable electronic systems. Liquid metals like Gallium (Ga) and its alloys offer high potential in the field of stretchable electronics and photonics due to their inherent high conductivity and malleability. However, their high surface tension and native oxide formation hinder uniform wetting and continuous film formation to get conducting films. Here, we report a fabrication strategy to realize electrically conductive Ga thin films with effective thicknesses around 100 nm on polymeric and elastomeric substrates. By enhancing the surface energy of the elastomer, we create uniform Ga nanodroplets capable of sustaining stretchability up to 200% strain. Our devices exhibit electronic conduction primarily through tunneling and display strain tunable piezoresistive characteristics, which are explained using Kirchhoff's resistive network and Simmon's analytical tunneling current model. To showcase the device's capability in fields of stretchable electronics, we demonstrate several functional prototypes, including flexible devices integrated with Light Emitting Diodes (LEDs), curvature and pressure sensors, and soft robotic grippers capable of sensing object curvature. The demonstrated devices highlight the potential of this approach for scalable integration of stretchable electronics in soft robotic and wearable platforms.