The goal of this article is the illustration of the new functionalities of the VADASE (Variometric Approach for Displacements Analysis Stand-alone Engine) processing approach. VADASE was presented in previous works as an approach able to estimate in real time the velocities and displacements in a global reference frame (ITRF), using high-rate (1 Hz or more) carrier phase observations and broadcast products (orbits, clocks) collected by a stand-alone GNSS receiver, achieving a displacements accuracy within 1–2 cm (usually better) over intervals up to a few minutes. It has been well known since the very first implementation and testing of VADASE that the estimated displacements might be impacted by two different effects: spurious spikes in the velocities due to outliers (consequently, displacements, obtained through velocities integration, are severely corrupted) and trends in the displacements time series, mainly due to broadcast orbit and clock errors. Two strategies are herein introduced, respectively based on Leave-One-Out cross-validation (VADASE-LOO) for a receiver autonomous outlier detection, and on a network augmentation strategy to filter common trends out (A-VADASE); they are combined (first, VADASE-LOO; second, A-VADASE) for a complete solution. Moreover, starting from this VADASE improved solution, an additional strategy is proposed to estimate in real time the overall coseismic displacement occurring at each GNSS receiver. New VADASE advances are successfully applied to the GPS data collected during the recent three strong earthquakes that occurred in Central Italy on 24 August and 26 and 30 October 2016, and the results are herein presented and discussed. The VADASE real-time estimated coseismic displacements are compared to the static ones derived from the daily solutions obtained within the standard post-processing procedure by the Istituto Nazionale di Geofisica e Vulcanologia.

At the beginning of 2012, a new optical satellite, called ZiYuan-3 (ZY-3), was launched from the Taiyuan Satellite Launch Centre. This article is aimed at the analysis and the assessment of the digital surface models (DSMs) and orthophotos from a ZY-3 triplet acquired over the city of Bolzano and the surrounding areas. The imagery processing chain was executed with four different software packages. In all cases the Rational Polynomial Functions (RPFs) orientation model was used, with rational polynomial coefficients (RPCs) supplied by the vendors. The accuracies of the extracted DSMs were compared with the public light detection and ranging (lidar) DSM. The DSM extracted with each software package was used to generate the corresponding orthophoto. The orthophoto accuracy was assessed against 1:5000/1:10000 maps. The results obtained show that ZY-3 imagery allow us to generate DSMs with an accuracy, in terms of root mean square error (RMSE), which can reach 1.5–4.2 m in the flat area, 3.9–6.9 in the urban area, and 5.7–8.2 m in the mountain area. These results are better than Shuttle Radar Topography Mission (SRTM). Regarding orthophoto generation, all software packages supply similar results with a significant bias of about 20 m, mainly caused by vendors’ RPC inaccuracy.

The SAR (Synthetic Aperture Radar) imagery are largely used for the environmental, structures and infrastructures monitoring. In particular, Differential SAR Interferometry (DInSAR) is a well known technique that allows producing spatially dense displacement maps with centimetre to millimetre accuracy. The SAR signal is characterized by phase and amplitude value and the DInSAR remote sensing technique allows to analyse deformation phenomena affecting both extended natural areas and localized man-made structures, by exploiting the phase difference of SAR image pairs. New SAR satellite sensors such as COSMO-SkyMed, TerraSAR-X and PAZ offer the capability to achieve positioning in a global reference frame accuracies in the meter range and even better, thanks to the higher image resolution (up to 0.20 m pixel resolution in the Staring SpotLight mode for TerraSAR-X and PAZ) and to the use of on board dual frequency GPS receivers, which allows to determine the satellite orbit with an accuracy at few centimetres level. The goal of this work is to exploit the slant-range measurements reaching centimetre accuracies using only the amplitude information of SAR images acquired by TerraSAR-X satellite sensor. The leading idea is to evaluate the positioning accuracy of well identifiable and stable natural and man-made Persistent Scatterers (PS’s) along the SAR line of sight. The preliminary results, obtained on the Berlin area (Germany), shown that it is possible achieve a slant-range positioning accuracy with a bias well below 10 cm and a standard deviation of about 3 cm; the results are encouraging for applications of high resolution SAR imagery amplitude data in land and infrastructures monitoring.

Keywords: Digital Surface Models, high resolution SAR imagery, radargrammetry This work is focused on the analysis of potentialities of the radargrammetric DSMs generation using high resolution SAR imagery acquired by three different platforms (COSMO-SkyMed, TerraSAR-X and Radarsat-2) with particular attention to geometric orientation models. Two orientation models have been tested in this work: the rigorous Toutin’s model, developed at the Canada Center for Remote Sensing (CCRS) and implemented in the commercial software package PCI Geomatica, and the radargrammetric model developed at University of Rome La Sapienza and implemented in the scientific software SISAR. A full comparison and analysis has been carried out over Beauport test site (Quebec, Canada), where a LIDAR ground truth and a dense set of GNSS CPs (Check points) are available. Moreover, a preliminary comparison between the DSMs extracted, respectively with SISAR and PCI-Geomatica has been performed. The accuracy of the generated DSMs has been evaluated through the scientific software DEMANAL developed by Prof. K. Jacobsen of University of Hannover. As regards orientation models, the results shown that the Toutin’s model accuracy is slightly better than the SISAR one, even if it is important to underline that the SISAR model is computed without using a priori ground truth information. As concern DSMs assessment, the global DSMs accuracy in term of RMSE is around 4 meter and the two radargrammetric approaches show similar performances.

The availability of new high resolution radar spaceborne sensors offers new interesting potentialities for the geomatics application: spatial and temporal change detection, features extraction, generation of Digital Surface (DSMs). As regards the DSMs generation from new high resolution data (as SpotLight imagery), the development and the accuracy assessment of method based on radargrammetric approach are topics of great interest and relevance. The aim of this investigation is the DSM generation from a COSMO-SkyMed Spotlight stereo pair with the radargrammetric technique. DSM generation procedure consists of two basic steps: the stereo pair orientation and the image matching. The suite for radargrammetric approach has been implemented in SISAR (Software per Immagini Satellitari ad Alta Risoluzione), a scientific software developed at the Geodesy and Geomatic Institute of the University of Rome "La Sapienza". As regard the image matching the critical issue is the definition of a strategy to search the corresponding points; in SISAR software, an original matching procedure has been developed, based on a coarse-to-fine hierarchical solution with an effective combination of geometrical constrains and an Area Base Matching (ABM) algorithm.