This article proposes a system based on a long-distance communications system with low economic and energy costs that allows connectivity to be carried out independently from the existing cellular coverage in the area. In addition, it describes the design, development, implementation and analysis of an Internet of Things (IoT) architecture based on Long-Range Wide-Area Network (LoRaWAN). Moreover, the system has been deployed as a prototype, and the behavior and scope of the system have been analyzed in various real environments: urban, rural and natural. The results obtained from the analysis show that the system is suitable for working in areas without coverage such as mountains.
Fifth-generation mobile networks (5G) are designed to support enhanced Mobile Broadband, Ultra-Reliable Low-Latency Communications, and massive Machine-Type Communications. To meet these diverse needs, 5G uses technologies like network softwarization, network slicing, and artificial intelligence. Multi-connectivity is crucial for boosting mobile device performance by using different Wireless Access Technologies (WATs) simultaneously, enhancing throughput, reducing latency, and improving reliability. This paper presents a multi-connectivity testbed from the 5G-CLARITY project for performance evaluation. MultiPath TCP (MPTCP) was employed to enable mobile devices to send data through various WATs simultaneously. A new MPTCP scheduler was developed, allowing operators to better control traffic distribution across different technologies and maximize aggregated throughput. Our proposal mitigates the impact of limitations on one path affecting others, avoiding the Head-of-Line blocking problem. Performance was tested with real equipment using 5GNR, Wi-Fi, and LiFi —complementary WATs in the 5G-CLARITY project—in both static and dynamic scenarios. The results demonstrate that the proposed scheduler can manage the traffic distribution across different WATs and achieve the combined capacities of these technologies, approximately 1.4 Gbps in our tests, outperforming the other MPTCP schedulers. Recovery times after interruptions, such as coverage loss in one technology, were also measured, with values ranging from 400 to 500 ms.
In this work, an architecture for IoT networks oriented towards environmental sustainability is presented. Due to the suitability of its characteristics in terms of coverage, power and support of a large number of devices, an enhanced LoRaWAN network has been chosen as the basis for this proposal. The architecture is completed with the virtualization of the different LoRaWAN network entities and the usage of a software-defined network for their interconnection. The publication and subscription to environmental data is carried out by using the MQTT protocol. MQTT has been optimized thanks to the use of the SDN network and the use of edge computing resources, which allows multicasting of published data. Thanks to our developed MQTT2MULTICAST protocol, latency is improved by approx. 90% and the traffic load within the SDN network is reduced by 55%. An scalability analysis shows that this solution is able to support tens of thousands of LoRaWAN gateways. The proposed architecture has been implemented using commercial equipment as a proof of concept.
28 May 2025 in IEEE Open Journal of the Communications Society
Integrating Time-Sensitive Networking (TSN) and 5th Generation (5G) systems is key for providing wireless low-latency services in industry. Despite research efforts, challenges remain. Due to the lack of commercial 5G modems supporting Ethernet-based sessions, tunneling mechanisms must be used to enable Layer 2 connectivity between TSN islands via IP-based 5G modems. Furthermore, harmonizing traffic classification and prioritization between TSN and 5G technologies is crucial for meeting industrial service requirements. In this work, we propose a Virtual Extensible LAN (VxLAN)-based solution to harmonize frame forwarding and Quality of Service (QoS) treatment among 5G and TSN. Our solution supports multiple Virtual Local Area Networks (VLANs) across several production lines. Furthermore, it supports TSN traffic mapping into 5G QoS flows. We use a 5G testbed to validate the effectiveness of the adopted solution. Our results show the average delay introduced by the proposed mechanisms is approximately 100 μs, which is significantly lower than the typical 5G packet transmission delay. Moreover, our findings demonstrate our solution preserves QoS treatment between the 5G system and TSN, ensuring that the priority of 5G QoS flows aligns with the priorities of industrial traffic flows.
Long Range Wide Area Network (LoRaWAN) has emerged as a leading Low Power Wide Area Network (LPWAN) solution for enabling connectivity in Internet of Things (IoT) wireless networks. The network slicing paradigm facilitates multitenancy and allows heterogeneous applications with diverse Quality of Service (QoS) requirements to coexist in various IoT use cases. This article addresses the radio resource allocation problem in a multitenant LoRaWAN network, where each tenant may serve multiple applications supported by Network Slicing (NS). To this end, we propose an optimization model to determine the optimal channel and Spreading Factor (SF) allocation for each end device in a multioperator environment with heterogeneous applications. The model maximizes aggregated normalized throughput while ensuring fairness among Network Operators (NOs), employing linearization strategies to solve the problem efficiently. Our evaluation demonstrates the maximum achievable LoRaWAN network capacity to accommodate diverse IoT smart city applications from different tenants. The results confirm that optimal resource allocations can be achieved within reasonable time frames while meeting all requirements, including fair resource distribution among slices, compliance with regulatory constraints, such as duty cycle limitations, assurance of QoS metrics (throughput, delay, and packet delivery ratio) for each NO, and full isolation of resources allocated to different NOs.
5G New Radio wireless networks based on the International Mobile Telecommunications specifications are fundamental for current mobile communications. This work focuses on the performance analysis of a private 5G network in an experimental and controlled environment. For this purpose, exhaustive experimentation considering 192 combinations of factors has been proposed and carried out in a controlled environment within a semi-anechoic and semi-reverberant chamber. This enables accurate observation of the impact of the studied factors on a series of Key Performance Indicators that are fundamental in 5G networks, such as latency, throughput, and reliability. This dataset has been analyzed using statistical algorithms such as Principal Component Analysis and SHapley Additive ExPlanations. The results show how network performance can be affected not only by the environment, but also by its configuration. Furthermore, the configurations contribute differently depending on the indicator, showing that these can be improved without an excessive impact on other indicators: (i) throughput improves by more than 26% by modifying parameters such as bandwidth, duplexing method, or number of antennas; (ii) latency improves over 7% by modifying the duplexing method or 12% by switching between radio access technologies; (iii) reliability is exceptionally high in controlled environments. Our study shows that reliability can achieve improvements of up to 196.5% in terms of lost and retransmitted packets. The insights found in this work, based on the proposed configurations and their respective improvements, can be extrapolated to proposed use cases for 5G networks.