How to realize efficient treatment of coal slime generated by a coal washing operation is an urgent problem to be solved in this industry. The presence of clay minerals, especially highly hydrophilic montmorillonite (MMT), is the key to the poor treatment effect of coal slime. Polyacrylamide (PAM) is very popular as a polymer agent to improve the treatment of coal slime. However, when it is used to treat coal slime with a high content of MMT, the selection of PAM type and the mechanism of action are still lacking. In this study, the effects of different types of PAM on the treatment of coal slime water containing MMT are considered by sedimentation and press filtration tests. The interaction mechanism of PAM on the MMT surface is studied by using ζ-potential, Brunauer–Emmett–Teller (BET) analysis, low-field nuclear magnetic resonance, density functional theory (DFT), and molecular dynamics (MD) simulations. The results show that the three PAM can improve the sedimentation and filtration effect of coal slime water, and the performance is CPAM > NPAM > APAM. The ζ-potential of the MMT (001) surface increases under the action of three PAM, and the effect of CPAM is the most significant. The adsorption of PAM on the MMT (001) surface has the ability to neutralize the surface charge of MMT. The flocculation of MMT particles under PAM results in an increase of particle size and a decrease of specific surface area. Meanwhile, the pore volume of MMT decreases, and the average pore size increases. In addition, PAM mainly removes vicinal water on the MMT surface. The active sites of the MMT surface and PAM are calculated by DFT. The adsorption of three PAM structural units on the MMT Na-001 surface and non-001 surface is nonbonding interaction, and the adsorption energy of CPAM is the largest. And the left shift of ε_p of the O atom on the MMT surface is conducive to the stable adsorption of CPAM. The MD results show that the concentration of water molecules on the surface of MMT Na-001 decreases after PAM is adsorbed on the MMT Na-001 surface, indicating that PAM can keep water molecules away from the surface of MMT, which means that the hydrophobicity of the MMT surface is enhanced. This study has guiding significance for the selection of PAM and the development of new flocculants in the treatment of coal slime with a high content of MMT.

The electrokinetic remediation (EKR) method has been extensively considered for the removal of inorganic pollutants from contaminated dredged sediment. In addition, the use of chelating agents as electrolyte solutions has been beneficial in increasing the mobility of metals. This study investigated the metals’ (Cd, Cr, Cu, Pb, and Zn) mobilities by assessing the effect of two environmentally friendly chelating agents, ethylenediaminedisuccinic acid (EDDS) and citric acid (CA), in enhancing the EKR efficiency under a periodic voltage gradient. The results showed that, for the same concentration (0.1 mol L⁻¹), CA is more suitable for enhancing the removal of Cr (67.83%), Cu (59.77%), and Pb (32.05%) by chelating and desorbing them from the sediment matrix and concentrating them in the electrode compartments. EDDS provided efficiency to improve the Cd extraction percentage (45.87%), whereas CA and EDDS had comparable improvement removal impacts on Zn EKR (39.32% and 41.37%, respectively). From the comparison with previous results obtained with a continuous voltage, applying a periodic voltage gradient associated with a low concentration of chelating agents led to a promising result.

Since the 2000s, Burkina Faso has experienced a rapid mining expansion with more than one hundred sites established, leading to increased waste generation often discharged untreated into the environment. Assessing water quality in these areas is therefore critical to mitigate environmental degradation and public health risks. This study develops a site-specific water quality index (WQI) for a gold mining area in Bam Province, Burkina Faso, with the objective of improving pollution monitoring and management in relation to tailing dams. Surface and groundwater samples were collected between 2021 and 2024. Physico-chemical and bacteriological analyses of groundwater sources including wells, piezometers and boreholes revealed that several parameters such as pH, turbidity, nitrates, sulphates, total iron, aluminium, arsenic, cadmium, cyanide and total and faecal coliforms exceeded international drinking water standards. Geospatial techniques were employed to identify the main contamination sources: domestic wastewater, industrial and artisanal mining and agricultural runoff. The evolution of these parameters in relation to the dynamics of soil occupation and the influence of geological structure has enabled the distinction of key parameters associated with discharges. Although individual contaminant levels were mostly moderate, their combined effects pose a significant long-term risk to ecosystems and human health. The tailored WQI is suitable for both surface water and groundwater. It provides an integrated tool for classifying and monitoring water quality in mining environments, supporting evidence-based decision making in the management of tailing dams, environmental protection and public health.