In this paper the workspace and payload capacity of a new design of reconfigurable Delta-type parallel robot is analysed. The reconfiguration is achieved by adjusting the length of the kinematic chains of a given robot link simultaneously and symmetrically during the operation of the robot. This would produce a dynamic workspace in shape and volume. A numerical analysis of the variation of shape and volume of the workspace and payload capacity of the robot is presented. Based both on the results of this analysis and on practical requirements, a proposal for the design of a reconfiguring mechanism is presented.

This paper presents an interaction control strategy for industrial robot manipulators which consists of the combination of a calibration-free, vision-based control method with an impedance-control approach. The vision-based, robot control method known as camera-space manipulation is used to generate a given, previously defined trajectory over an arbitrary surface. Then, a kinematic impedance controller is implemented in order to regulate the interaction forces generated by the contact between the robot end-effector and the work surface where the trajectory is traced. The paper presents experimental evidence on how the vision-force sensory fusion is applied to a path-tracking task, using a Fanuc M16-iB industrial robot equipped with a force/torque sensor at the wrist. In this task, several levels of interaction force between the robot end-effector and the surface were defined. As discussed in the paper, such a synergy between the control schemes is seen as a viable alternative for performing industrial maneuvers that require force modulation between the tool held by the robot and the working surface.