The performance of monolithic silica microreactors activated with sulphonic acid groups and a packed bed reactor with Amberlyst 15 resin were compared in the esterification of acetic acid with n-butanol. The monolithic microreactors were made of single silica rods with complex pore architecture, differing in the size of mesopores, and in particular, flow-through macropores which significantly affected the flow characteristic of the continuous system. The highest ester productivity of 105.2 mol·mol_H⁺⁻¹·h⁻¹ was achieved in microreactor M1 with the largest porosity, characterized by a total pore volume of 4 cm³·g⁻¹, mesopores with 20 nm diameter, and large flow-through macropores 30–50 μm in size. The strong impact of the permeability of the monoliths on a reaction kinetics was shown.

In this work, the kinetics of Meerwein–Ponndorf–Verley chemoselective reduction of carbonyl compounds was studied in monolithic continuous-flow microreactors. To the best of our knowledge, this is the first report on the MPV reaction kinetics performed in a flow process. The microreactors are a very attractive alternative to the batch reactors conventionally used in this process. The proposed micro-flow system for synthesis of unsaturated secondary alcohols proved to be very efficient and easily controlled. The microreactors had reactive cores made of zirconium-functionalized silica monoliths of excellent catalytic properties and flow characteristics. The catalytic experiments were carried out with the use of 2-butanol as a hydrogen donor. Herein, we present the kinetic parameters of cyclohexanone reduction in a flow reactor and data on the reaction rate for several important ketones and aldehydes. The lack of diffusion constraints in the microreactors was demonstrated. Our results were compared with those from other authors and demonstrate the great potential of microreactor applications in fine chemical and complex intermediate manufacturing.