The guided-mode resonance phenomenon in curved grating structures was studied. By using finite-difference time-domain simulation in the cylindrical coordinate system, we investigated the dependence of the peak reflectivity and bandwidth of the resonance upon the curvature radius. We clarified that the reflectivity and bandwidth were similar to those of flat grating structures for a finite range of curvature. We also discussed the key factor that determines the performance of reflection.
The possibility of antireflection (AR) coatings on a dielectric multilayer having sub-wavelength deep structural modification is investigated. We numerically surveyed the effect of reflectivity reduction attained by double-layer AR coatings for a wavy multilayer on a patterned substrate. It was clarified that double-layer AR coatings for wavy multilayer is possible with a similar performance level as conventional flat multilayer. Also, it was demonstrated that a pair of AR layers effectively works for a wide range of the horizontal pitch.
A thin-film grating on a curved substrate functions as a highly reflective and wavelength sensitive mirror for a diverging wave that has the same curvature as the substrate. In this paper we propose a cylindrical cavity surrounded by a curved resonant grating wall, and describe its resonance characteristics. Through finite-difference time-domain (FDTD) simulation we have clarified that this type of cavity supports two resonance modes: one is confined by Fresnel reflection and the other by resonance reflection of the wall. We have also demonstrated that the latter mode exhibits a Q factor several orders of magnitude higher than that of the former mode.
An multilayer with zigzag layer interfaces is fabricated on a patterned silica substrate using the autocloning method. The multilayer is designed to function as multichannel long-wave pass type edge filters with various cutoff wavelengths. A cutoff wavelength shift of the order of in the near infrared region () is experimentally demonstrated.
A novel configuration of dielectric multilayer wavelength filters for enabling sharp cut-off characteristics is proposed. By applying perturbations to the multilayer structures such as corrugation or lateral film isolation, deep optical stopbands can be created as a result of the coupling between the obliquely and horizontally propagating light waves. Numerical simulation by FDTD revealed that the proposed structure had approximately two to three times larger decay constants than that of unmodulated flat multilayer.
We demonstrate multichannel optical bandpass filters utilizing alternating dielectric multilayers stacked on a patterned substrate. A microstructured multilayer was formed by rf biased magnetron sputtering process on a fused silica substrate with surface gratings. The bandwidths of each filter channel were measured to be in the near infrared region. Control of center wavelength and bandwidth by the grating pitch was verified.