The growth of the world population has increased the production of wastes. These are generally incinerated or deposited in outdoor landfills, which impacts the environment and affects human health. A technique that allows to reuse of wastes and diminishes adverse effects on the environment is pyrolysis. Through this technique, a material known as Biochar (BC) is produced, which has proven to have interesting physical-chemical properties for it to be used as an asphalt modifier, and simultaneously, helps to mitigate negative impacts on the environment. The foregoing article presents a bibliographical review on the use of BC as a modifier for asphalt binders and asphalt mixes. This has the purpose of becoming a starting point for future research efforts. In the reviewed literature, there was no review found on this topic. In general terms, BC increases the performance of asphalt binders in high-temperature climates, and tends to reduce its performance in low-temperature ones. Few studies have evaluated the performance of BC on asphalt mixes and the long-term properties associated with durability. Based on the reviewed literature, at the end of the article, recommendations are provided for future study topics.

In Brazil, large quantities of iron ore tailings (IOT) are produced as a result of iron mining, which may affect the environment negatively. This work evaluated the use of IOT in hot mix asphalt type C (HMA-C). For this purpose, IOT was incorporated as a filler (at 1% in relation to the total mass of HMA-C). The hot asphalt mix with IOT (called HMA-IOT) was designed and compared with a control HMA-C. The behavior of the mixtures under monotonic (indirect tensile strength, ITS, and the Marshall stability test), under dynamic (fatigue and resilient modulus tests), and static (static creep test) loading conditions was evaluated. Also, the resistance to induced moisture damage (tensile strength ratio, TSR) was calculated. As a general conclusion, it was shown that the use of IOT in HMA improves its mechanical response without increasing mixing and compaction temperatures and using less effective asphalt binder content. This could provide a new form of environmentally safe disposal of IOTs.

The use of polymeric waste in the modification of asphalt binders for the construction of road pavements is a technique studied several years ago. However, the use of these materials involves high temperatures close to 190 °C, which generate large environmental impacts due to their emissions. In this study, an asphalt cement (AC) with low-density polyethylene (LDPE) residue contents of 5%, 7%, and 10% with respect to the mass of the AC was modified by the wet method. The modification was carried out using a temperature of 150 °C with the aim of preventing the oxidation of the AC and reducing the emissions generated at high temperatures. Based on the physical-rheological properties of the modified asphalt binder, it was found that 5% LDPE produces the best performance. Subsequently, a hot-mix asphalt type HMA-19 control without a modified asphalt binder and another with a modified asphalt binder were manufactured in order to evaluate the mechanical behavior by means of the Marshall test, an indirect tensile strength (ITS) test, resilient modulus (RM) testing, resistance to fatigue testing, permanent deformation testing, and the Cantabro test. Additionally, the asphalt mixtures were tested under the conditions of short-term aging (STOA, Short-Term Oven Aging), long-term aging (STOA + LTOA, Long-Term Oven Aging), and partial saturation with water (STOA + LTOA + water). Based on the results, an ANOVA analysis of variance was performed to assess whether the changes in the mechanical response of the modified mixture are statistically significant with respect to the control mixture. As a general conclusion, it is reported that mixtures with LDPE can be used for thick layers in high-temperature climates in order to control rutting.

A recently used material that shows environmental and technical advantages for use as an asphalt binder modifier is biochar (BC). Different biomasses can be converted into BC by pyrolysis. One agro-industrial biomass that is abundant in copious quantities is oil palm mesocarp fiber (OPMF) obtained from African palm cultivation. In the present study, the use of a BC obtained from OPMF (BC-OPMF) as a modifier of asphalt binder (AC type) to produce a hot mix asphalt (HMA) was evaluated. This type of BC has not been investigated or reported in the reference literature as a binder and/or asphalt mix modifier. Initially, AC was modified with BC in three ratios (BC/AC = 5, 10, and 15%, with respect to mass) to perform penetration, softening point, and rotational viscosity tests; rheological characterization at high and intermediate temperatures; and scanning electron microscope (SEM) visualization. Based on this experimental phase, BC/AC = 10% was chosen to manufacture the modified HMA. Resistance parameters under monotonic loading (stability—S, flow—F, S/F ratio of the Marshall test, and indirect tensile strength in dry—ITSD and wet—ITSC conditions) and cyclic loading (resilient modulus, permanent deformation, and fatigue resistance under stress-controlled conditions) were evaluated on the control HMA (AC unmodified) and the modified HMA. Additionally, the tensile strength ratio (TSR) was calculated to evaluate the resistance to moisture damage. Abrasion and raveling resistance were evaluated by performing Cantabro tests. BC-OPMF is shown to be a sustainable and promising material for modifying asphalt binders for those seeking to increase stiffness and rutting resistance in high-temperature climates, resistance to moisture damage, raveling, and fatigue without increasing the optimum asphalt binder content (OAC), changing the volumetric composition of the HMA or increasing the manufacturing and construction temperatures.

Effective management and handling of construction and demolition waste (CDW) can yield significant technical and environmental benefits for road pavement construction. This article aims to provide a comprehensive and up-to-date chronological review of studies on the mechanical performance of asphalt mixtures—primarily hot mix asphalt (HMA)—incorporating recycled concrete aggregate (RCA). Since the main limitation of RCA is the presence of residual adhered mortar, the review also includes studies that applied various surface treatments (mechanical, chemical, and thermal, among others) to enhance mixture performance. The article summarizes the experimental procedures used and highlights the key findings and conclusions of the reviewed research. Although the results are varied and sometimes contradictory—mainly due to the source variability and heterogeneity of RCA—the use of these materials is technically viable. Moreover, their application can provide environmental, social, and economic advantages, particularly in the construction of low-traffic roadways. Finally, the article identifies research gaps and offers recommendations for future researches.