The microwave drying of a Philippine nickel laterite ore was proposed as an alternative drying method to reduce the air pollution before further pyrometallurgical processing. The effect of thickness of ore bed and microwave power on the specific energy consumption and effective diffusivity were assessed. The results show that the specific energy consumption decreases with increasing the bed thickness and that the specific energy consumption exhibits a minimum at 1200 W. Besides, the increase of nickel laterite thickness and microwave power promotes the effective diffusivity. Compared with the removal of free water, crystalline water removal is proved to be much more energy-intensive. Furthermore, the specific energy consumption in microwave drying of laboratory scale is substantially higher than commercial rotary kiln drying.
17 June 2022 in Journal of Materials Research and Technology
The effective recovery of gallium from wastewater discharge in the Bayer process is promising for the long-term development of gallium resources. The adsorption and desorption behavior of gallium (Ga), vanadium (V), and aluminum (Al) ions on a strong acidic styrene cation exchange resin (JK resin) from a simulated Bayer solution was systematically investigated by static experiments. The results showed that the optimum conditions for separating Ga from V and Al were at low temperatures and short contact times, with 78.30%, 15.16%, and 6.63% of the adsorption efficiency at 25 °C and 60 min, respectively, for Ga, V, and Al. The adsorption kinetics of Ga3+ conformed to the pseudo-second order model, and the static saturation adsorption capacity was 18.25 mg/g. The Langmuir model fitted the adsorption isotherm of gallium well, and the maximum adsorption capacity was 1.11 mg/g at 25 °C. FT-IR spectroscopy and XPS showed that the mechanism of the Ga3+ adsorption was only related to the interaction of the oxygen atoms of the amide oxime group (C=NOH). The separation of Ga, V, and Al can be achieved by desorbing 98% of Al with low concentrations of ammonia and 90% of Ga with low concentrations of hydrochloric acid. The results indicate that JK resin is an efficient adsorbent for separating gallium and vanadium in alkaline solutions.
The solid waste and waste acid generated during the production of titanium dioxide contain considerable amount of scandium, which are valuable secondary resources. In this study, the titanium dioxide waste acid was used to leach the scandium-containing solid waste, and the leached solution was pretreated for iron removal by reduction-crystallization process. After that, scandium was recovered from the leached solution by using the P204-TBP co-extraction system. The process parameters were investigated systematically. The results showed that iron powder reduction-crystallization for iron removal at molar ratio of Fe:Fe3+ = 0.25 was most suitable for subsequent extraction, and the scandium extraction efficiency could reach 100% using 15% P204-5% TBP at 25 °C with A/O = 8. This study provided a novel process for treating scandium-bearing solid waste with scandium-bearing waste acid, showing great potential for industrial application.