Organic waste management is an important concern for both industries and communities. Proper management is crucial for various reasons, such as reducing greenhouse gas emissions, promoting sustainability, and improving public health. Composted manure is a valuable source of nutrients and organic matter that can be used as a soil amendment in agriculture. Some important benefits of using composted manure in agriculture include: improves soil fertility, enhances soil structure, reduces soil erosion, suppresses plant diseases, and reduces reliance on synthetic fertilizers. Composted manure represents one of the most effective methods of organic waste valorization. Its macronutrients and micronutrients content can increase plant yield, without any reported negative or toxic effects on the soil and plants at various application rates. However, improper use of farmyard manure can have negative effects on the environment, such as air pollution from greenhouse gas emissions, soil acidification, and contamination of surface water and groundwater by nitrates and phosphates. The properties of the soil, including aeration, density, porosity, pH, water retention capacity, etc., can be improved by the structure and composition of manure. The slow-release source of nutrients provided by the nutrient content of compost can determine proper plants growth. However, it is crucial to use compost in moderation and regularly test soil to prevent excessive nutrient application, which can have adverse effects on plants and the environment.

In this paper, a comprehensive review on greywater is presented. Emphasis is given to the techniques used to treat and recover greywater, and special emphasis is placed on the risk of the existence of the novel coronavirus “SARS-CoV-2” in greywater and the possibility of its spread via the reuse of this water. In general, greywater is considered wastewater collected from domestic sources, with the exclusion of toilet water (which is considered as blackwater). Greywater represents 50 to 80% of the total volume of wastewater all over the world. This review provides various aspects related to greywater, such as origins, characteristics, and existing guidelines for greywater proper treatment and reuse. Several approaches and techniques have been developed to study the performance of different greywater treatment systems. These methods are critically discussed in this article. In the context of sustainable development, water management, and taking into account the scarcity of water resources, particularly in arid and semi-arid areas, the use of treated greywater is one of the alternatives methods that can reduce the burden of withdrawals from the resource. In addition, some successful examples of greywater valuation experiences in Tunisia were examined.

In recent decades, minimization and recycling/reuse policies were introduced to reduce the quantities of generated waste and for alternative waste recovery. Organic wastes represent 46% of total global solid waste. Possible uses of organic wastes include using it as fertilizer and amendment for soil, for energy recovery and for the production of chemical substances. Sewage sludge disposal and reuse are identified as future problems concerning waste. The total amount of sludge generated in the entire world has increased dramatically, and this tendency is expected to increase significantly in the years to come. In most developed countries, special attention is given to sewage sludge treatment in order to improve the quality and safety of using it on the ground surface. Sewage sludge pyrolysis is considered an acceptable method, from an economic and ecological perspective, for the beneficial reuse of sewage sludge. This method has many advantages because, during the pyrolysis process, the sludge volume is reduced by 80%, pathogenic agents and hazardous compounds from sewage sludge are eliminated, metals are immobilized in solid residue and organic and inorganic fractions are immobilized in a stabilized form of pyrolytic residues (biochar). The biochar generated by sewage sludge pyrolysis does not contain pathogenic agents and is rich in carbon and nutrients.

Constructed wetlands (CWs) are important plant filters used for wastewater treatment. The behavior of the Canna indica-planted CWs in the face of a highly variable composition of industrial wastewater has yet to be understood. Here, we show the effectiveness of Canna indica-planted and unplanted vertical subsurface flow CWs for the treatment of Algiers petroleum refinery’s effluent. The selected species was placed in the CWs containing light expanded clay aggregate (LECA) and sand as a substrate. The findings indicate that the planted constructed wetlands efficiently removed 85% of total suspended solids (TSS), 96.38% of total nitrogen (TN), 96.15% of nitrate nitrogen (NO₃⁻-N), 99.15% of ammonium nitrogen (NH₄⁺-N), and 99.87% of nitrite nitrogen (NO₂⁻-N). The overall mean removal efficiencies for heavy metals in the vegetated CWs were considerably greater than those of the control. Concentrations of Cr, Cu, Fe, Pb, Zn, Al, Ni, and Cd were calculated in the roots, rhizomes, leaves, and stems of the plant; then, the bioaccumulation factor (BAF) and translocation factor (TF) were determined. An initial examination using scanning electron microscopy (SEM–EDX) was also included in the study. The analysis indicated that toxic elements were adsorbed on plant tissues, concentrated in the roots, and partially transported to the aerial parts. These results are useful for the design of CWs to treat industrial wastewater, enabling water of acceptable quality to be discharged into the environment, especially as a low maintenance and cost-effective technology in developing countries.

In the present study, heavy metal concentrations (Cu, Zn, Pb, As) from former industrial areas were analyzed in soil and the plant species Phragmites Australis (common reed), a plant species found in shallow river banks. The objectives of the study were to determine the accumulation, translocation, and enrichment capacity of soils and plants (root, stem, leaf, and flower) with heavy metals, and to evaluate the potential of the plant species Phragmites Australis (common reed) in the phytoremediation of heavy-metal-polluted soils. The sediments and plants investigated were particularly rich in heavy metals such as Cu, Zn, Pb, and As, and Pb and Zn concentrations were determined to be of phytotoxic level. The highest transfer coefficient of heavy metals from the soil to the root of the plant species Phragmites Australis (common reed) was for the metals Cu and Zn. The transfer of heavy metals from the root of the plant species Phragmites Australis (common reed) to the aerial part of the plant was lowest for Cu. A very low enrichment factor value was recorded for the metal As. The mobility of heavy metals was generally higher from the sediment to the plant roots, with the order of the average transfer coefficient values being Cu > Zn > Pb > As for all three areas analyzed. The translocation of heavy metals from the root to the upper aerial part of the plant was in the form of As > Pb > Zn > Cu in the plant species Phragmites australis (common reed). According to the average values obtained for the three coefficients, the accumulation, translocation, and enrichment capacity of heavy metals in soil and the plant species Phragmites Australis (common reed), it can be stated that the plant species Phragmites Australis (common reed) is very suitable for use in the process of soil remediation by phytoremediation.

One main drawback of electrical discharge machining (EDM) is related to the dielectric fluid, since it impacts both the environment and operator health and safety. To resolve these issues, recent research has demonstrated the technical feasibility and qualitative performance of vegetable oils as substitutes for hydrocarbon-based dielectric and synthetic oils in EDM. However, due to the higher content of unsaturated fatty acids, vegetable oils lose their stability, due to several factors such as heating or exposure to light or oxygen. The present study is a first attempt to analyze the extent to which the physic-chemical properties of vegetable oils change during EDM processing. Refractive index, dynamic viscosity and spectra analyses were conducted for sunflower and soybean oils. The results revealed that, under the applied processing conditions, no structural changes occurred. These findings are very promising from the perspective of EDM sustainability.