Mick Emil Kolster

Dr. Mick Emil Kolster

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MKMick Emil Kolster
Mick Emil Kolster
MWMark David Wigh
Mark David Wigh
ESEduardo Lima Simões da Silva
Eduardo Lima Simões da Silva
TVTobias Bjerg Vilhelmsen
Tobias Bjerg Vilhelmsen
ADArne Døssing
Arne Døssing
Using Uncrewed Aerial vehicles (UAVs) to rapidly scan areas for potential unexploded ordnance (UXO) can provide an efficiency increase while minimizing detonation risks. We present a complete overview of how such mappings can be performed using scalar magnetometers, including initial sensor testing, time stamping validation, data positioning, noise removal, and source model inversion. A test survey was performed across disarmed UXO targets, during which three scalar magnetometers were towed in an airframe (“bird”) 10 m below a small (<25 kg) high speed (∼10 m/s) UAV to avoid magnetic disturbances from the UAV itself. Data were collected across ∼58 min of flight, with each sensor traversing ∼31.7 km to acquire dense data coverage across a 600 m × 100 m area. By using three individual magnetometers in the bird, UXO detection results across single-sensor data and several different multi-sensor configurations can be compared. The data obtained exhibited low apparent noise floors (on the order of tens of picoTesla) and retained a precision that enabled targeted modelling and removal of high-frequency noise with amplitudes of ±5 picoTesla. All of the different gradiometer configurations tested enabled recovery of most targets (including all major targets), although the horizontal configuration performed significantly worse in comparison.

8 October 2020 in Geophysical Journal International
Verified
Journal Article
Open access
MKMick Emil Kolster
Mick Emil Kolster
ADArne Døssing
Arne Døssing
SUMMARY: During scalar magnetic surveys, where the amplitude of the magnetic field is measured, small changes in towed sensor positions can produce complex noise-resembling signals in the data. For well-constructed measurement systems, these signals often contain valuable information, rather than noise, but it can difficult to realize their potential. We present a simple, general approach, which can be used to directly invert data from scalar magnetic surveys, regardless of dynamic or unexpected sensor position variations. The approach generalizes classic along-track gradients to an iterative, or recursive, difference, that can be applied irrespective of the amount of magnetic sensors and their positions within a dynamic measurement system, as long as these are known. The computed difference can be inverted directly, providing a versatile method with very little data pre-processing requirements, which we denote as recursive difference inversion. We explain the approach in a general setting, and expand it to provide a complete framework for Unexploded Ordnance (UXO) detection using a point-dipole model. Being an extension of classic along-track gradients, the method retains many of the same properties, which include added robustness to external time-dependent disturbances, and the ability to produce aesthetic visual data representations. In addition, the framework requires neither tie lines, data levelling, nor diurnal corrections. Only light pre-processing actions, namely initial survey trimming and data position calculation, are required. The method is demonstrated on data from a dual sensor system, conventionally referred to as a vertical gradiometer, which is towed from an Unmanned Aerial Vehicle. The system enables collection of high-quality magnetic data in adverse settings, and simultaneously reduces the risk of inadvertent UXO detonations. To enable qualitative testing, we established a UXO detection test facility with several buried UXO, typical to World War II, in a magnetically complex in-land area. Data from the test facility was mainly used to evaluate inversion robustness and depth accuracy of the point-dipole model. Subsequently, we apply the method to real UXO survey data collected for the Hornsea II offshore wind farm project in the United Kingdom. This data set was collected in a coastal setting, and subject to significant sensor position changes during flight due to varying wind conditions over multiple survey days. This makes the raw data set challenging to interpret directly, but it can still be easily and reliably inverted for source locations through recursive difference inversion. In each of the two data sets, we attempt to recover UXO positions using recursive difference inversion on data from both a single sensor, as well as on data from two synchronized sensors, in each case inverting the difference directly for point-dipole model parameters. To seed the inversion, we propose a simple routine for picking out potential targets, based on the choice of a significant peak prominence in the time-series of computed differences. Higher order difference inversion was found to provide robust results in the magnetically complex setting, and the recovered equivalent dipole depths were found to approximate the actual UXO depths well.

28 February 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MKMick Emil Kolster
Mick Emil Kolster
ADArne Døssing
Arne Døssing
SKShfaqat Abbas Khan
Shfaqat Abbas Khan
Geothermal heat flow is key to unraveling several large-scale geophysical systems, including the inner workings of the Greenlandic ice sheet, and by extension, the possibility of understanding the past and prior global climate. Similarly, it could provide insight into the paleo-trace of the Icelandic mantle plume, which in turn is integral in answering long-standing questions on the origin of mountains in western and eastern Greenland and in Norway. This study documents the results from an intra-scientific field approach, which combines geological, petrophysical, and satellite magnetic field data in a nonlinear probabilistic inversion. These results include Curie depths with associated uncertainties and Geothermal Heat Flux estimates. While baselines remain challenging to evaluate due to the strong nonlinearity of the problem posed, stress testing reveals a high robustness of the predicted spatial variations, which largely disagree with the classic straightforward northwest–southeast or east–west plume trace across Greenland. Instead, our results indicate a complex heat flux pattern, including a localized region with anomalously heightened heat flux near the origin of the Northeast Greenland Ice Stream.

9 March 2023 in Geophysical Journal International
Verified
Journal Article
Closed access
PDF file
MWMark David Wigh
Mark David Wigh
MKMick Emil Kolster
Mick Emil Kolster
THThomas Mejer Hansen
Thomas Mejer Hansen
ADArne Døssing
Arne Døssing
A test site containing 24 targets of various disarmed unexploded ordnance (UXO) and non-UXO items were placed on a beach on the island of Rømø (Denmark) in a 600 m x 100 m area. Scalar magnetic anomalies were measured at 3-5 m altitude using an uncrewed aerial vehicle (UAV), towing a bird with a three-sensor triangular configuration to achieve a dense coverage with flight lines of 2 m spacing. The triple-sensor dataset is utilized in a probabilistic inversion setup to infer the magnetic moments of the 24 targets. The purpose of the study, is to try and distinguish between different types of ferromagnetic objects (UXO, non-UXO) using magnetic anomaly data. The inversion methodology uses different forward models (prolate spheroids, rectangular prisms) to infer target shape, size and orientation in an attempt to discriminate between UXO and non-UXO items. Stochastic inversions are carried out using different prior assumptions of remanent magnetization strength (⁠|$10\%$|⁠, |$50\%$| and |$80\%)$| of the induced dipole moment. Among the three levels of remanent magnetization strength in the prior, only some cases of discrimination seem evident for the lowest strength of remanence. One item is correctly classified as a true-negative (i.e. non-UXO) when assuming low remanent magnetization strength (⁠|$10\%)$| of the induced moment). However, at low remanent strength, one false-negative classification emerges, making any discrimination unreliable when assuming such low remanent magnetization. In addition to the discrimination study, different covariance models are utilized to optimize the inversion by addressing correlated errors and noise in the triple-sensor data set. Three covariance models are tested to try and account for spatially correlated noise and potential errors among the three sensors of each overflight. In many cases, the covariance models presented show a potential increase in sampling efficiency and consistency between data and the noise model, suggesting a more robust approach to a noise model in magnetic anomaly inversions. If the noise model is poor, however, it may bias the results by addressing the anomaly signal as noise. The inversions with correlated noise models are compared with inversions using a simple uncorrelated noise model. For several cases of data anomalies, differences between the inversion estimates when using correlated and uncorrelated noise models were evident, indicating that some bias may appear when assuming uncorrelated noise. Due to the general high presence of correlated signals in magnetic survey data, correlated noise models can significantly improve the overall uncertainty estimate of the estimated dipole moment. The study demonstrates, in terms of the 24 targets considered, that discrimination between UXO and non-UXO using magnetics is difficult. However, when using scalar magnetic data of high quality and resolution, the estimated dipole moments are often well resolved and uniquely defined in magnitude and position. This could provide valuable posterior information for future inversion studies by building a library of inferred magnetic moments from targets that have been found and inspected.

9 September 2021 in Near Surface Geophysics
Verified
Journal Article
Open access
PDF file
MKMick Emil Kolster
Mick Emil Kolster
ADArne Døssing
Arne Døssing
Continuing advances within unmanned aerial vehicles and scalar magnetic sensor technology are revolutionizing geophysical remote sensing. For perspective, examples of high resolution, low noise data presented in this study enabled detection and accurate positioning of human‐made ferrous objects with a total mass of 0.5 kg, from altitudes around and above 2 m. However, with these new possibilities come a requirement of higher fidelity, where good sensor position estimates, in particular, are key to achieving a data quality sufficient for reliable data interpretation and geophysical inversion. Apart from inherent instrument properties, typical factors that hamper sensor position estimation are lag and parallax errors. Lag errors arise from time‐stamping delays between the positioning system and sensor reading, while parallax errors stem from the imperfect recovery of sensor positions due to a decoupling and/or distancing of the positioning system and sensor head. The impact from each of these error sources is typically similar and partially or even completely inseparable. A number of correctional techniques exist, typically based on large‐scale data correlations, or collection of specific additional data. We present a survey data adjustment method based on the simultaneous inversion of source parameters and a number of independent survey shifts or lags in pre‐specified sections of a survey. The method is particularly suited for surveys where the sensor path through space can be assumed well known, but the sensor position itself may suffer lags or shifts relative to the position measurement. The approach is based on modelling an existing source signature within the data and requires no data transformations, such as continuation to a two‐dimensional plane, or enforcing of smoothness. The approach is an amendment to independent source inversion and is ideal for scenarios where the source behaviour is thought to be well known, such as processing efforts in which the objective is source–parameter inversion. In this study, we validate the approach using a simple point‐dipole model to adjust synthetic data and subsequently demonstrate it on an unmanned airborne scalar magnetic survey for small unexploded ordnance targets, where a hardware malfunction resulted in unknown time‐shifts between magnetic sensor readings and positioning unit output. The adjustment procedure was carried out on line data, based on a single anomaly from a 155 mm shell, and enabled the recovery of signatures from several other ferrous unexploded ordnance targets as small as 0.5 kg. Subsequent inversion on the corrected signatures provided unexploded ordnance positions with an accuracy suitable for recovery purposes.

1 February 2023 in The Leading Edge
Verified
Journal Article
Closed access
ADArne Døssing
Arne Døssing
MKMick Emil Kolster
Mick Emil Kolster
TRThorkild Rasmussen
Thorkild Rasmussen
JPJacob T. Petersen
Jacob T. Petersen
ESEduardo L. S. da Silva
Eduardo L. S. da Silva
Scalar magnetic surveying using unmanned aerial vehicle (UAV) platforms is slowly gaining momentum within geophysical applications. So far, only a handful of studies have dealt with UAV-towed scalar field measurements, while even fewer have considered towed scalar difference measurements (or gradients). In this paper, we demonstrate the possibilities and benefits of deploying precisely positioned noise-minimized UAV-towed scalar transverse horizontal difference (THD) measurements for mineral exploration purposes. UAV-towed gradiometry bird data are presented from the Nautanen area in northern Sweden and compared with ground magnetic surveys. This area is known for its iron oxide copper-gold mineralizations. The UAV survey spans a total area of 2.5 km2. It was covered using an average line spacing of 30 m and a constant flight altitude above ground level of 30 m. High-quality scalar total-field and THD data were collected with a dynamic noise level of the raw scalar data of about ±0.05 nT. Comparison with the ground magnetic data shows a strong correlation between magnetic anomaly lows and highs across the survey areas. A map with new structural information is presented based on subtle magnetic structures identified in discrete derivatives of the total magnetic intensity anomaly and THD data. Such systems may replace high-quality heliborne systems and reduce costs of the geophysical exploration phase. However, mapping with UAV-towed systems is not straightforward. With typical UAV flight speeds of only 10–12 m/s, the wind often disturbs the 3D attitude of the bird during flights. Hence, advanced processing is required to obtain the intended gradients. Similar challenges are less important in surveying, where the survey speed often greatly exceeds the wind speed.