Joo-Yun Jung

Dr. Joo-Yun Jung


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2017 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JJJoo-Yun Jung
Joo-Yun Jung
KSKyungjun Song
Kyungjun Song
JCJun-Hyuk Choi
Jun-Hyuk Choi
JLJihye Lee
Jihye Lee
DCDae-Geun Choi
Dae-Geun Choi
DNDean P. Neikirk
Dean P. Neikirk
We demonstrate an infrared broadband metasurface absorber that is suitable for increasing the response speed of a microbolometer by reducing its thermal mass. A large fraction of holes are made in a periodic pattern on a thin lossy metal layer characterised with a non-dispersive effective surface impedance. This can be used as a non-resonant metasurface that can be integrated with a Salisbury screen absorber to construct an absorbing membrane for a microbolometer that can significantly reduce the thermal mass while maintaining high infrared broadband absorption in the long wavelength infrared (LWIR) band. The non-dispersive effective surface impedance can be matched to the free space by optimising the surface resistance of the thin lossy metal layer depending on the size of the patterned holes by using a dc approximation method. In experiments a high broadband absorption was maintained even when the fill factor of the absorbing area was reduced to 28% (hole area: 72%), and it was theoretically maintained even when the fill factor of the absorbing area was reduced to 19% (hole area: 81%). Therefore, a metasurface with a non-dispersive effective surface impedance is a promising solution for reducing the thermal mass of infrared microbolometer pixels.

14 October 2016 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SSSungho Shin
Sungho Shin
YKYang Hyeog Kwon
Yang Hyeog Kwon
YKYoung-Hwan Kim
Young-Hwan Kim
JJJoo-Yun Jung
Joo-Yun Jung
Junghyo NahJunghyo Nah
Junghyo Nah
Palladium (Pd)-based hydrogen (H2) gas sensors have been widely investigated thanks to its fast reaction and high sensitivity to hydrogen. Various sensing mechanisms have been adopted for H2 gas sensors; however, all the sensors must be powered through an external battery. We report here an H2 gas sensor that can detect H2 by measuring the output voltages generated during contact electrification between two friction surfaces. When the H2 sensor, composed of Pd-coated ITO (indium tin oxide) and PET (polyethylene Terephthalate) film, is exposed to H2, its output voltage is varied in proportion to H2 concentration because the work function (WF) of Pd-coated surface changes, altering triboelectric charging behavior. Specifically, the output voltage of the sensor is gradually increased as exposing H2 concentration increases. Reproducible and sensitive sensor response was observed up 1% H2 exposure. The approach introduced here can easily be adopted to development of triboelectric gas sensors detecting other gas species.

13 May 2021 in Small Methods
Verified
Journal Article
Open access
PDF file
IHInyong Hwang
Inyong Hwang
MKMingyun Kim
Mingyun Kim
JYJaeyeon Yu
Jaeyeon Yu
JLJihye Lee
Jihye Lee
JCJun‐Hyuk Choi
Jun‐Hyuk Choi
JJJoo-Yun Jung
Joo-Yun Jung
Surface‐enhanced infrared absorption (SEIRA) spectroscopy is a powerful methodology for sensing and identifying small quantities of analyte molecules via coupling between molecular vibrations and an enhanced near‐field induced in engineered structures. A metamaterial absorber (MA) is proposed as an efficient SEIRA platform; however, its efficiency is limited because it requires the appropriate insulator thickness and has a limited accessible area for sensing. SEIRA spectroscopy is proposed using an MA with a 10 nm thick vertical nanogap, and a record‐high reflection difference SEIRA signal of 36% is experimentally achieved using a 1‐octadecanethiol monolayer target molecule. Theoretical and experimental comparative studies are conducted using MAs with three different vertical nanogaps. The MAs with a vertical nanogap are processed using nanoimprint lithography and isotropic dry etching, which allow cost‐effective large‐area patterning and mass production. The proposed structure may provide promising routes for ultrasensitive sensing and detection applications.

7 April 2016 in Nanotechnology
Verified
Journal Article
Closed access
PDF file
YKYang Hyeog Kwon
Yang Hyeog Kwon
SSSung-Ho Shin
Sung-Ho Shin
JJJoo-Yun Jung
Joo-Yun Jung
Junghyo NahJunghyo Nah
Junghyo Nah
We report nanoimprint lithographic submicron surface patterning for scalable output power generation and performance enhancement in triboelectric nanogenerators (TENGs). Specifically, one contact surface of a TENG is nanoimprinted with polyurethane acrylate (PUA) lines in different pitches and the counter contact surface is coated with perfluoropolyether (PFPE). The results show that a TENG with 200 nm pitch PUA lines exhibits voltage and current up to ∼430 V and ∼55 μ A cm −2 , generating about a sixfold higher output power than that with a flat PUA surface at an applied force of 0.3 MPa. In addition, scalable output power was obtained by adjusting line pitches. Further enhancement in output power was also demonstrated by chemically functionalizing the PUA line patterns with poly (diallyldimethylammonium chloride) (PDDA). The PDDA functionalization boosted voltage and current up to ∼500 V and ∼100 μ A cm −2 , respectively, which corresponds to ∼50% power density enhancement. The approach introduced here is a simple, effective, scalable and reproducible way to fabricate TENGs.

24 May 2019 in Scientific Reports
Verified
Journal Article
Open access
PDF file
YJYongseok Jung
Yongseok Jung
IHInyong Hwang
Inyong Hwang
JYJaeyeon Yu
Jaeyeon Yu
JLJihye Lee
Jihye Lee
JCJun-Hyuk Choi
Jun-Hyuk Choi
JLJongwon Lee
Jongwon Lee
We report a sensing platform for surface-enhanced infrared absorption (SEIRA) spectroscopy, based on Fano metamaterials (FMMs) on dielectric nanopedestals. FMMs consist of two parallel gold (Au) nanorod antennas, with a small horizontal coupler attached to one of the nanorod antenna. When placed on SiO2 dielectric nanopedestals, which exhibit strong field enhancements caused by the interference between subradiant and superradiant plasmonic resonances, they provide the highly enhanced E-field intensities formed near the Au nanoantenna, which can provide more enhanced molecular detection signals. Here, the sensing characteristics of FMMs on nanopedestals structure was confirmed by comparison with FMMs on an unetched SiO2 substrate as a control sample. The control FMMs and the FMMs on nanopedestals were carefully designed to excite Fano resonance near the target 1-octadecanethiol (ODT) fingerprint vibrations. The FMMs were fabricated by using nanoimprint lithography and the nanopedestal structures were formed by isotropic dry-etching. The experimental reflection spectra containing the enhanced absorption signals of the ODT monolayer molecules was analyzed using temporal coupled-mode theory. The FMMs on nanopedestals achieved over 7% of reflection difference signal, which was 1.7 times higher signal than the one from the control FMMs. Based on the FMMs on nanopedestal structures proposed in this study, it may be widely applied to future spectroscopy and sensor applications requiring ultrasensitive detection capability.

2 July 2021 in Optics Express
Verified
Journal Article
Open access
PDF file
JJJoo-Yun Jung
Joo-Yun Jung
JLJihye Lee
Jihye Lee
JCJun-Hyuk Choi
Jun-Hyuk Choi
DCDae-Geun Choi
Dae-Geun Choi
JJJun-Ho Jeong
Jun-Ho Jeong
An infrared plasmonic metamaterial absorber with a nanogap was numerically and experimentally investigated as a refractive index sensor. We experimentally demonstrated large enhancements of both sensitivity (approximately 1091 nm/refractive index unit) and figure of merit (FOM*; approximately 273) owing to the nanogap formation in the metamaterial absorber to achieve perfect absorption (99%). The refractive index sensing platform was fabricated by producible nanoimprint lithography and isotropic dry etching processes to have a large area and low cost while providing a practical solution for high-performance plasmonic biosensors.