Timely and accurate information on the spatial distribution of urban trees is critical for sustainable urban development, management and planning. Compared with satellite-based remote sensing, Unmanned Aerial Vehicle (UAV) remote sensing has a higher spatial and temporal resolution, which provides a new method for the accurate identification of urban trees. In this study, we aim to establish an efficient and practical method for urban tree identification by combining an object-oriented approach and a random forest algorithm using UAV multispectral images. Firstly, the image was segmented by a multi-scale segmentation algorithm based on the scale determined by the Estimation of Scale Parameter 2 (ESP2) tool and visual discrimination. Secondly, spectral features, index features, texture features and geometric features were combined to form schemes S1–S8, and S9, consisting of features selected by the recursive feature elimination (RFE) method. Finally, the classification of urban trees was performed based on the nine schemes using the random forest (RF), support vector machine (SVM) and k-nearest neighbor (KNN) classifiers, respectively. The results show that the RF classifier performs better than SVM and KNN, and the RF achieves the highest accuracy in S9, with an overall accuracy (OA) of 91.89% and a Kappa coefficient (Kappa) of 0.91. This study reveals that geometric features have a negative impact on classification, and the other three types have a positive impact. The feature importance ranking map shows that spectral features are the most important type of features, followed by index features, texture features and geometric features. Most tree species have a high classification accuracy, but the accuracy of Camphor and Cinnamomum Japonicum is much lower than that of other tree species, suggesting that the features selected in this study cannot accurately distinguish these two tree species, so it is necessary to add features such as height in the future to improve the accuracy. This study illustrates that the combination of an object-oriented approach and the RF classifier based on UAV multispectral images provides an efficient and powerful method for urban tree classification.

Olive trees, which are planted widely in China, are economically significant. Timely and accurate acquisition of olive tree crown information is vital in monitoring olive tree growth and accurately predicting its fruit yield. The advent of unmanned aerial vehicles (UAVs) and deep learning (DL) provides an opportunity for rapid monitoring parameters of the olive tree crown. In this study, we propose a method of automatically extracting olive crown information (crown number and area of olive tree), combining visible-light images captured by consumer UAV and a new deep learning model, U²-Net, with a deeply nested structure. Firstly, a data set of an olive tree crown (OTC) images was constructed, which was further processed by the ESRGAN model to enhance the image resolution and was augmented (geometric transformation and spectral transformation) to enlarge the data set to increase the generalization ability of the model. Secondly, four typical subareas (A–D) in the study area were selected to evaluate the performance of the U²-Net model in olive crown extraction in different scenarios, and the U²-Net model was compared with three current mainstream deep learning models (i.e., HRNet, U-Net, and DeepLabv3+) in remote sensing image segmentation effect. The results showed that the U²-Net model achieved high accuracy in the extraction of tree crown numbers in the four subareas with a mean of intersection over union (IoU), overall accuracy (OA), and F1-Score of 92.27%, 95.19%, and 95.95%, respectively. Compared with the other three models, the IoU, OA, and F1-Score of the U²-Net model increased by 14.03–23.97 percentage points, 7.57–12.85 percentage points, and 8.15–14.78 percentage points, respectively. In addition, the U²-Net model had a high consistency between the predicted and measured area of the olive crown, and compared with the other three deep learning models, it had a lower error rate with a root mean squared error (RMSE) of 4.78, magnitude of relative error (MRE) of 14.27%, and a coefficient of determination (R²) higher than 0.93 in all four subareas, suggesting that the U²-Net model extracted the best crown profile integrity and was most consistent with the actual situation. This study indicates that the method combining UVA RGB images with the U²-Net model can provide a highly accurate and robust extraction result for olive tree crowns and is helpful in the dynamic monitoring and management of orchard trees.

Carbon storage estimation for fast-growing bamboos remains limited because of its wide distribution and spatial variation. This study estimates biomass production and carbon storage of a moso bamboo (Phyllostachys pubescens Mazel ex Houz.) forest in southern China. A diameter–age bivariate distribution model based on the Weibull distribution function and a single bamboo biomass estimation model based on diameter and age were used to predict the biomass and carbon storage. The parameters of the two models were obtained on the basis of the observation data. Results showed that moso bamboo biomass varied with age and diameter at breast height (DBH). The corresponding estimated biomass and carbon storage in the study area were 88.23 and 40.45 Mg ha⁻¹, respectively. One-sixth of older culms from the entire stand were removed by selective cutting, and the annual yields of biomass and carbon were 14.07 and 6.74 Mg ha⁻¹, respectively. The moso bamboo forest has higher carbon sequestration capacity than Chinese fir (Cunninghamia lanceolata (Lamb.) Hook.) forest, tropical mountain rain forest, loblolly pine (Pinus taeda L.) forest and oriental oak (Quercus variabilis Bl.). The present model could be used well to estimate accurately the biomass carbon of moso bamboo at regional scale in southern China.

Understanding the spatial variability of soil organic carbon (SOC) must be enhanced to improve sampling design and to develop soil management strategies in terrestrial ecosystems. Moso bamboo (Phyllostachys pubescens Mazel ex Houz.) forests have a high SOC storage potential; however, they also vary significantly spatially. This study investigated the spatial variability of SOC (0-20 cm) in association with other soil properties and with spatial variables in the Moso bamboo forests of Jian’ou City, which is a typical bamboo hometown in China. 209 soil samples were collected from Moso bamboo stands and then analyzed for SOC, bulk density (BD), pH, cation exchange capacity (CEC), and gravel content (GC) based on spatial distribution. The spatial variability of SOC was then examined using geostatistics. A Kriging map was produced through ordinary interpolation and required sample numbers were calculated by classical and Kriging methods. An aggregated boosted tree (ABT) analysis was also conducted. A semivariogram analysis indicated that ln(SOC) was best fitted with an exponential model and that it exhibited moderate spatial dependence, with a nugget/sill ratio of 0.462. SOC was significantly and linearly correlated with BD (r = −0.373**), pH (r = −0.429**), GC (r = −0.163*), CEC (r = 0.263**), and elevation (r = 0.192**). Moreover, the Kriging method requires fewer samples than the classical method given an expected standard error level as per a variance analysis. ABT analysis indicated that the physicochemical variables of soil affected SOC variation more significantly than spatial variables did, thus suggesting that the SOC in Moso bamboo forests can be strongly influenced by management practices. Thus, this study provides valuable information in relation to sampling strategy and insight into the potential of adjustments in agronomic measure, such as in fertilization for Moso bamboo production.

The accurate and timely identification of crops holds paramount significance for effective crop management and yield estimation. Unmanned aerial vehicle (UAV), with their superior spatial and temporal resolution compared to satellite-based remote sensing, offer a novel solution for precise crop identification. In this study, we evaluated a methodology that integrates object-oriented method and random forest (RF) algorithm for crop identification using multispectral UAV images. The process involved a multiscale segmentation algorithm, utilizing the optimal segmentation scale determined by Estimation of Scale Parameter 2 (ESP2). Eight classification schemes (S1–S8) were then developed by incorporating index (INDE), textural (GLCM), and geometric (GEOM) features based on the spectrum (SPEC) features of segmented objects. The best-trained RF model was established through three steps: feature selection, parameter tuning, and model training. Subsequently, we determined the feature importance for different classification schemes and generated a prediction map of vegetation for the entire study area based on the best-trained RF model. Our results revealed that S5 (SPEC + GLCM + INDE) outperformed others, achieving an impressive overall accuracy (OA) and kappa coefficient of 92.76% and 0.92, respectively, whereas S4 (SPEC + GEOM) exhibited the lowest performance. Notably, geometric features negatively impacted classification accuracy, while the other three feature types positively contributed. The accuracy of ginger, luffa, and sweet potato was consistently lower across most schemes, likely due to their unique colors and shapes, posing challenges for effective discrimination based solely on spectrum, index, and texture features. Furthermore, our findings highlighted that the most crucial feature was the INDE feature, followed by SPEC and GLCM, with GEOM being the least significant. For the optimal scheme (S5), the top 20 most important features comprised 10 SPEC, 7 INDE, and 3 GLCM features. In summary, our proposed method, combining object-oriented and RF algorithms based on multispectral UAV images, demonstrated high classification accuracy for crops. This research provides valuable insights for the accurate identification of various crops, serving as a reference for future advancements in agricultural technology and crop management strategies.