The use of drones in mining environments is one way in which data pertaining to the state of a site in various industries can be remotely collected. This paper proposes a combined system that employs a 6-bands multispectral image capturing camera mounted on an Unmanned Aerial Vehicle (UAV) drone, Spectral Angle Mapping (SAM), as well as Artificial Intelligence (AI). Depth possessing multispectral data were captured at different flight elevations. This was in an attempt to find the best elevation where remote identification of magnetite iron sands via the UAV drone specialized in collecting spectral information at a minimum accuracy of +/− 16 nm was possible. Data were analyzed via SAM to deduce the cosine similarity thresholds at each elevation. Using these thresholds, AI algorithms specialized in classifying imagery data were trained and tested to find the best performing model at classifying magnetite iron sand. Considering the post flight logs, the spatial area coverage of 338 m2, a global classification accuracy of 99.7%, as well the per-class precision of 99.4%, the 20 m flight elevation outputs presented the best performance ratios overall. Thus, the positive outputs of this study suggest viability in a variety of mining and mineral engineering practices.
The identification of trace element anomalies in soils has been proven to assist semi-mechanized small-scale gold operations. This study employs soil geochemistry combined with the microchemical signature of particulate gold from the Batouri goldfield to (1) vector possible gold-endowed lithologies introducing particulate gold into the overlying regolith, and (2) assess anthropogenic Hg used in purification of both primary and alluvial/eluvial gold by artisans. The soil geochemistry shows irregularly distributed anomalies of elevated Cu especially in the saprolite soil layer. Whereas in the lateritic soil layer, a Au-Ag-Hg metal association is reported for the first time in this gold district and could be linked to anthropogenic Hg used in gold recovery. Particulate gold recovered from the soil varies in shape from euhedral and irregular to sub-rounded, indicating a proximal lode source. The gold grains range in size from nano-particles to >300 µm and are Au-Ag alloys. The gold particles reveal inclusions such as quartz, silicate, zircon and ilmenite suggesting that the grains were dislodged from quartz veins within the granitic basement. Systematic variation in the microchemical signature of the gold grains is suggestive of spatial and temporal evolution of the mineralizing fluid. These results are consistent with investigations from similar geologic settings worldwide and validate the combined utility of gold fingerprinting and pathfinder elements in soil to examine deposit genesis in other gold districts globally.
A set of magnetotelluric (MT) data collected from 28 stations at the Kasane Hot Spring in northern Botswana was used to derive a 3-D model of the electrical resistivity distribution around deep geologic structures that we associated with geothermal resources. The dimensionality analysis results revealed that 3-D modeling should be used to determine the electrical structure. The resistivity models revealed a conductive layer with an average thickness of 200 m, representing the overlying sediments of the Proterozoic volcanic rocks. The thick high-resistivity zone (>100 Ωm) below the conductive layer can be associated with Mesoproterozoic bedrock. The MT measurements in this area show a tube-shaped conductive anomaly that could serve as a fluid pathway feeding the hot spring. A fracture-controlled meteoric fluid circulation presumably determines the existence of the Kasane Hot Spring system.
The 3 April 2017 Mw 6.5 Moiyabana earthquake (Central Botswana) had a significant impact on groundwater levels; a gradual co-seismic increase and a stepwise decline in groundwater levels were observed in response to the earthquake at boreholes MH2 and Z12836, respectively. In this study, we investigated the response of groundwater levels to Earth tides by computing the amplitude and phase shift of the M2 tidal constituent to estimate the temporal variations of the storativity, transmissivity, and permeability of the Ntane sandstone aquifer (the main aquifer system) prior to and after the earthquake event. The storativity and permeability computed for borehole MH2 showed a decrease in magnitude of 3.17432 × 10−4 and 1.85 × 10−13 m2 respectively, indicating that strong ground shaking at borehole MH2 might have consolidated the aquifer material, thus resulting in decreased aquifer permeability. The aquifer coefficient of storativity decreased by 2.85 × 10−4 while permeability was enhanced by 0.047 × 10−13 m2 at borehole Z12836. Enhanced permeability might have resulted from increased/enhanced fracturing of the aquifer, fracture clearing and dynamic shaking.