Zeeshan Nawaz

Dr. Zeeshan Nawaz

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
JAJavaid Akhtar
Javaid Akhtar
MIMuhammad Imran
Muhammad Imran
AAArshid Ali
Arshid Ali
ZNZeeshan Nawaz
Zeeshan Nawaz
AMAyyaz Muhammad
Ayyaz Muhammad
HNHafiz Amir Naeem
Hafiz Amir Naeem
In this study, the densification of three agriculture waste biomasses (corn cobs, cotton stalks, and sunflower) is investigated using the torrefaction technique. The samples were pyrolyzed under mild temperature conditions (200–320 °C) and at different residence times (10 min–60 min). The thermal properties of the obtained bio-char samples were analyzed via thermo-gravimetric analysis (TGA). Compositional analysis of the torrefied samples was also carried out to determine the presence of hemicellulose, cellulose, and lignin contents. According to the results of this study, optimum temperature conditions were found to be 260 °C–300 °C along with a residence time of 20 min–30 min. Based on the composition analysis, it was found that biochar contains more lignin and celluloses and lower hemicellulose contents than do the original samples. The removal of volatile hemicelluloses broke the interlocking of biomass building blocks, rendering biochar brittle, grindable, and less reactive. The results of this study would be helpful in bettering our understanding of the conversion of agricultural waste residues into valuable, solid biofuels for use in energy recovery schemes. The optimum temperature condition, residence time, and GCV for torrefied corn cobs were found to be 290 °C, 20 min, and 5444 kcal/kg, respectively. The optimum temperature condition, residence time, and GCV for torrefied cotton balls were found to be 270 °C, 30 min, and 4481 Kcal/kg, respectively. In the case of sunflower samples, the mass yield of the torrefied sample decreased from 85% to 71% by increasing the residence time from 10 min to 60 min, respectively.

23 June 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
Mujeeb KhanMujeeb Khan
Mujeeb Khan
Syed Farooq AdilSyed Farooq Adil
Syed Farooq Adil
MAMohamed E. Assal
Mohamed E. Assal
AAAbdulrahman Alharthi
Abdulrahman Alharthi
Mohammed Rafi ShaikMohammed Rafi Shaik
Mohammed Rafi Shaik
MSM Rafiq Siddiqui
M Rafiq Siddiqui
Catalytic efficacy of metal-based catalysts can be significantly enhanced by doping graphene or its derivatives in the catalytic protocol. In continuation of previous work regarding the catalytic properties of highly-reduced graphene oxide (HRG), graphene-oxide (GO) doped mixed metal oxide-based nanocomposites, herein we report a simple, straightforward and solventless mechanochemical preparation of N-doped graphene (NDG)/mixed metal oxide-based nanocomposites of ZnO–MnCO3 (i.e., ZnO–MnCO3/(X%-NDG)), wherein N-doped graphene (NDG) is employed as a dopant. The nanocomposites were prepared by physical milling of separately fabricated NDG and ZnO–MnCO3 calcined at 300 °C through eco-friendly ball mill procedure. The as-obtained samples were characterized via X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), Raman, Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDX) and surface area analysis techniques. To explore the effectiveness of the obtained materials, liquid-phase dehydrogenation of benzyl alcohol (BOH) to benzaldehyde (BH) was chosen as a benchmark reaction using eco-friendly oxidant (O2) without adding any harmful surfactants or additives. During the systematic investigation of reaction, it was revealed that the ZnO–MnCO3/NDG catalyst exhibited very distinct specific-activity (80 mmol/h.g) with a 100% BOH conversion and <99% selectivity towards BH in a very short time. The mechanochemically synthesized NDG-based nanocomposite showed remarkable enhancement in the catalytic performance and increased surface area compared with the catalyst without graphene (i.e., ZnO–MnCO3). Under the optimum catalytic conditions, the catalyst successfully transformed various aromatic, heterocyclic, allylic, primary, secondary and aliphatic alcohols to their respective ketones and aldehydes with high selectively and convertibility without over-oxidation to acids. In addition, the ZnO–MnCO3/NDG was also recycled up to six times with no apparent loss in its efficacy.

26 April 2022 in International Journal of Sustainable Development and Planning
Verified
Journal Article
Open access
ZNZeeshan Nawaz
Zeeshan Nawaz
Muhammad ImranMuhammad Imran
Muhammad Imran
Saad NawazSaad Nawaz
Saad Nawaz
AAAbid Ali
Abid Ali
ASAbdur Rashid Sangi
Abdur Rashid Sangi
The strategic prioritization in policy synergies heterogeneous stakeholders and opportunities that facilitates developing nations to game for betterment of society in limited resources. The strategic prioritization methodology was presented to frame long and short-term actions with available resources. The theme is to develop inherently de-carbonize economies with minimum spending, efforts, adopting best practices, exploit regional potential, optimize asset efficiency, recycling/reuse, technology and innovation, etc. However, trickle down global climate change regulations require level of awareness for regional energy dynamics, politics, bureaucratic structure, training and education, infrastructural weaknesses, financial barriers, etc. Several conflicting, non-measurable and inconsistency in policies destroy efforts towards net carbon zero and hindering de-carbonizing objectives in the developing world. No doubt, societal factors and their interest’s influences political systems engaged in energy transition policymaking, implementation and enforcement. Therefore, it’s time to organize energy transition efforts/planning in a way that it has minimum financial impact and keep developing economies on momentum. The article highlights sustainable policy instruments, initiatives, best practices, opportunities, innovation areas and identify stating steps those will inherently lead climate change ambitious targets of de-carburization in developing economies with minimum financial investment.

9 July 2021 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
Muhammad SuhailMuhammad Suhail
Muhammad Suhail
IBIqra Babar
Iqra Babar
YKYousaf Ali Khan
Yousaf Ali Khan
MIMuhammad Imran
Muhammad Imran
ZNZeeshan Nawaz
Zeeshan Nawaz
In multiple linear regression models, the multicollinearity problem mostly occurs when the explanatory variables are correlated among each other. It is well known that when the multicollinearity exists, the variance of the ordinary least square estimator is unstable. As a remedy, Liu in [1] developed a new method of estimation with biasing parameter d. In this paper, we have introduced a new method to estimate the biasing parameter in order to mitigate the problem of multicollinearity. The proposed method provides the class of estimators that are based on quantile of the regression coefficients. The performance of the new estimators is compared with the existing estimators through Monte Carlo simulation, where mean squared error and mean absolute error are considered as evaluation criteria of the estimators. Portland cement and US Crime data is used as an application to illustrate the benefit of the new estimators. Based on simulation and numerical study, it is concluded that the new estimators outperform the existing estimators in certain situations including high and severe cases of multicollinearity. 95 mean prediction interval of all the estimators is also computed for the Portland cement data. We recommend the use of new method to practitioners when the problem of high multicollinearity exists among the explanatory variables.

1 December 2017 in Hungarian Journal of Industry and Chemistry
Verified
Journal Article
Open access
ZNZeeshan Nawaz
Zeeshan Nawaz
A pseudo-homogeneous model of methyl-tert-butyl-ether (MTBE) synthesis in a multi-tubular packed-bed reactor has been developed using an Aspen Custom Modeler (ACM) for selecting optimum operating strategies, for the maximization and enhancement of MTBE production, and isobutylene consumption, respectively. The model accounts for mass, energy and momentum balances; and the effectiveness factor is evaluated in a onedimensional pseudo-homogeneous model. The kinetic investigation contains kinetic rate expressions as given by the effectiveness factor for accounting the resistance of pellets in terms of mass and heat transfer. An activity coefficient can be used in order to systematically obtain a new steady-state solution. The model used literature-based correlations for the estimation of heat transfer coefficients. The value of the coefficient for gascoolant heat transfer can be adjusted by using a tuning coefficient in order to enrich the process data. Reasonable agreement was found between model predictions and data under similar conditions. The studies concerning model sensitivity compute the optimum temperature, pressure, feed flow rate, methanol/isobutylene ratio, heat removal rate, etc. of the reactor and suggest optimum operating conditions of the reactor.

1 March 2018
Verified
Dataset
Closed access
ZNZeeshan Nawaz
Zeeshan Nawaz
The dehydrogenation of light alkanes, especially propane and butane, is widely exploited for the large-scale production of corresponding olefins. The industrial application of the direct dehydrogenation of light alkanes is limited due to reaction and thermodynamic constraints. The dehydrogenation of light hydrocarbons involves the breaking of two carbon–hydrogen bonds with the simultaneous formation of a hydrogen and carbon-carbon double bond selectively. It may appear to be simple, but their endothermic nature and selectivity control at higher temperature is difficult. The same technologies with minor changes in process and catalyst were used for the production of both propane and isobutane dehydrogenation. The economic analysis of the available technologies based on the specific consumption of feedstock, operational ease, and capital investment indicates an internal rate of return ~25%. The attractiveness of light alkane dehydrogenation is largely dependent on the difference in feedstock and the price of olefins produced. The available technologies and how they manage reaction constraints at commercial scale have been compared. The possible solution for improvement is by focusing on catalyst improvements and the unique design of reactors.