The development of active and durable photocatalysts without noble metals for green hydrogen generation is a major challenge in photocatalysis. Herein, composite nanomaterials based on TiO ₂ coupled with HKUST‐1, a copper metal–organic framework, for hydrogen generation by photocatalysis using water and methanol as sacrificial agents are developed. To design a highly active composite, the mass ratios between HKUST‐1 and TiO ₂ are studied and optimized. The photoactive composite materials are characterized by TEM, UV–vis spectroscopy, FTIR, XRD, XPS, and photoelectrochemical studies. The charge carrier dynamics is also studied by time‐resolved microwave conductivity and the crucial role of the copper is also investigated by XPS and electron paramagnetic resonance. DFT calculations are also used to understand the mechanism involved in H ₂ generation. The findings reveal a high hydrogen evolution rate of HKUST‐1/TiO ₂ (5.11 mmol g ⁻¹  h ⁻¹ ) for the first cycle with the mass ratio (1:20). This activity increases with cycling until surpassing the performance of the 1 wt.% Pt (TiO ₂ ) material, used as a benchmark and known as a reference in terms of photocatalytic hydrogen production, and a rate of 13.24 mmol g ⁻¹  h ⁻¹ is obtained after the sixth cycle.

Given the growing concern over antibiotic resistance, there is an urgent need to explore alternative antibacterial strategies. Metal oxide nanostructures have emerged as a promising option, and in particular, zinc oxide (ZnO) nanostructures have demonstrated strong antifungal and antibacterial properties. This study focuses on ZnO nanowires (ZnO NWs) and their potential as antibacterial agents against Pseudomonas putida, a Gram-negative bacterium. The objective is to investigate the antibacterial mechanisms and assess their efficiency. The unique shape of ZnO NWs, obtained through hydrothermal growth, may rupture bacterial cells and inhibit bacterial growth. In addition to their morphology, the release of Zn²⁺ ions from ZnO NWs may contribute to their antibacterial properties. These ions have the potential to disrupt the bacterial cell membrane, further impeding bacterial growth. Moreover, ZnO nanostructures exhibit excellent photocatalytic properties under UV light, enhancing their antibacterial effects. Overall, this study highlights the potential of hydrothermally synthesized ZnO NWs in inhibiting P. putida growth and provides valuable insights into their antibacterial mechanisms. The findings suggest that ZnO nanostructures have the potential to be effective antibacterial agents and could be utilized in various settings to fight microbial infections and maintain hygiene.

Semiconductor-based photocatalysis is a well-known and efficient process for achieving water depollution with very limited rejects in the environment. Zinc oxide (ZnO), as a wide-bandgap metallic oxide, is an excellent photocatalyst, able to mineralize a large scale of organic pollutants in water, under UV irradiation, that can be enlarged to visible range by doping nontoxic elements such as Ag and Fe. With high surface/volume ratio, the ZnO nanostructures have been shown to be prominent photocatalyst candidates with enhanced photocatalytic efficiency, owing to their being low-cost, non-toxic, and able to be produced with easy and controllable synthesis. Thus, ZnO nanostructures-based photocatalysis can be considered as an eco-friendly and sustainable process. This paper presents the photocatalytic activity of ZnO nanostructures (NSs) grown on different substrates. The photocatalysis has been carried out both under classic mode and microfluidic mode. All tests show the notable photocatalytic efficiency of ZnO NSs with remarkable results obtained from a ZnO-NSs-integrated microfluidic reactor, which exhibited an important enhancement of photocatalytic activity by drastically reducing the photodegradation time. UV-visible spectrometry and high-performance liquid chromatography, coupled with mass spectrometry (HPLC-MS), are simultaneously used to follow real-time information, revealing both the photodegradation efficiency and the degradation mechanism of the organic dye methylene blue.

Air pollution is one of the major environmental issues that humanity is facing. Considering Indoor Air Quality (IAQ), Volatile Organic Compounds (VOCs) are among the most harmful gases that need to be detected, but also need to be eliminated using air purification technologies. In this work, we tackle both problems simultaneously by introducing an experimental setup enabling continuous measurement of the VOCs by online absorption spectroscopy using a MEMS-based Fourier Transform infrared (FTIR) spectrometer, while those VOCs are continuously eliminated by continuous adsorption and photocatalysis, using zinc oxide nanowires (ZnO-NWs). The proposed setup enabled a preliminary study of the mechanisms involved in the purification process of acetone and toluene, taken as two different VOCs, also typical of those that can be found in tobacco smoke. Our experiments revealed very different behaviors for those two gases. An elimination ratio of 63% in 3 h was achieved for toluene, while it was only 14% for acetone under same conditions. Adsorption to the nanowires appears as the dominant mechanism for the acetone, while photocatalysis is dominant in case of the toluene.

To shift towards the greener city, photocatalytic urban infrastructures have emerged as a promising solution for pollution remediation. To reach this goal, the large bandgap semiconductors, such as nontoxic Zinc Oxide (ZnO), already proved their excellent photocatalytic performances. However, integrating and developing cost-effective and greener photocatalytic surfaces with an easily scaled-up synthesis method and without energy and chemical product overconsumption is still challenging. Therefore, this work proposes to develop a depolluting Zinc (Zn) roof covered by ZnO nanostructures (NSs) using a one-step seedless hydrothermal growth method in 2 h. The feasibility of this synthesis was firstly studied on small areas of Zn (1.25 cm²) before being scaled up to medium-sized areas (25 cm²). The efficiency of this functionalization route for ZnO NSs grown without seed layer was attributed to the presence of Zn²⁺ sites and the native oxide film on the Zn surface. Their photocatalytic efficiency was demonstrated by removing in less than 3 h the Methylene Blue (MB) and Acid Red 14 (AR14) in both DI water and rainwater under UV-light. Promising results were also recorded under solar light. Therefore, the photocatalytic Zn roof functionalized by ZnO NSs is a promising route for rainwater purification by photocatalysis.