Several studies have been devoted to increasing the attenuation performance of the Helmholtz resonator (HR). One way is by periodic coupling of HRs in a ducting system. In this study, we propose a different approach, where a membrane (or a thin flexible structure in general) is added to the air cavity of a periodic HR array in order to further enhance the attenuation by utilizing the resonance effect of the membrane. It is expected that three attenuation mechanisms will exist in the system that can enhance the overall attenuation, i.e. the resonance mechanism of the HR, the Bragg reflection of the periodic system, and the resonance mechanism of the membrane or thin flexible structure. This study found that the proposed system yields two adjacent attenuation peaks, related to the HR and the membrane respectively. Moreover, extension of the attenuation bandwidth was also observed as a result of the periodic arrangement of HRs. With the same HR parameters, the peak attenuation by the membrane is tunable by changing its material properties. However, such a system does not always produce a wider attenuation bandwidth; the resonance bandwidths of both mechanisms must overlap.
1 April 2021 in Journal of Physics: Conference Series
Nowadays, the demand of sustainable and eco- friendly absorber is increasing. Non-woven fabrics made of textile waste can be a good candidate to address such a demand. From measurement results, absorption capability of this kind of material is evident. However, most of non-woven fabrics are manufactured on the basis of density only rather than targeted acoustic parameter to meet particular absorption performance. This work is focused on investigation of non-woven fabrics sound absorption performance characteristics. For this, surface morphology of non-woven fabrics with different density is evaluated by which detail geometrical properties of fiber can be observed. Experimental works on similar material system with variation in density and thickness are also conducted to obtain sound absorption coefficients. It is found that fiber size affects the absorption performance for the same thickness by which flow resistivity can be determined. For thickness of 10-50 mm, fibre size of 15-23 µm can produce sound absorption greater than 0.7 while the thickness and flow resistivity are inter-play to determine overall absorption characteristics.
This study proposes sonic crystal green walls based on combined cylinder scatterers and vegetation. It has been known that the vegetation or greenery system is effective in dealing with environmental pollutants, while the cylinder scatterer arranged periodically, also known as a sonic crystal, is preferable owing to the capability of noise attenuation, light transmission, and air circulation simultaneously. Combining both components into a single noise abatement system is expected to provide acoustical and non-acoustical features for urban design, where such an approach maximizes the merit of each component. Moreover, the system is useful for advocating sustainability amid global warming issues. In this work, a numerical model is developed using finite element method (FEM), while experimental results are provided to validate the absorption and attenuation results. It is found that the sonic crystal can attain an attenuation of 13.5 dB around 1.6 kHz. Such a promising result is extended further to lower frequency under a specific configuration of scatterers corresponding to lattice distance and filling faction ratio parameters. Meanwhile, the vegetation can enhance overall attenuation at higher frequencies.
Combining the micro-perforated panel, air gap, and porous material under a multi-layer composite absorber framework has been proved to help obtain absorption enhancement. Theoretically and experimentally, the multi-layer system can extend the absorption value and associated bandwidth, although the desired improvements are not always present. For this purpose, theoretical models, experimental validation, and sensitivity analysis are performed where woven fabric, air gap, and nonwoven are considered as micro-perforated panel, air gap, and porous material, respectively. It is expected that this leads to a better understanding, particularly of the most critical parameters affecting associated behaviors. This understanding should be beneficial for a practical design procedure amid many parameters involved in the composite textile material. For the same textile materials, the results show that not all parameters involved are important in determining overall behavior, while influential parameters dictating the resulting behaviors are different for different sequences of elementary textile material in the multi-layer composite. This suggests that selecting optimal design parameters in the multi-layer composite needs great care.