The aim of this contemporary work was to formulate a controlled release mucoadhesive nanoparticle formulation for enhancing the oral bioavailability of Ticagrelor (TG), a BCS class IV drug, having low oral bioavailability of about 36%. The nanoparticles can act as efficient carriers for hydrophobic drugs, due to having high surface area and hence can improve their aqueous solubility due to their hydrophilic nature. The nanoparticles (NPs) of TG were formulated using chitosan (CH) as polymer and sodium tripolyphosphate (TPP) as cross-linker, by ionic gelation technique with varying concentrations of polymer with respect to TG and TPP. Characterization of prepared nanoparticles was carried out to assess zeta potential, size, shape, entrapment efficiency (EE) and loading capacity (LC), using zeta sizer, surface morphology and chemical compatibility analysis. Drug release was observed using UV-Spectrophotometer. By increasing concentration of CH the desired size of particles (106.9 nm), zeta potential (22.6 mv) and poly dispersity index (0.364) was achieved. In vitro profiles showed a controlled and prolonged release of TG in both lower pH-1.2 and neutral pH-7.4 mediums, with effective protection of entrapped TG in simulated gastric conditions. X-ray diffraction patterns (XRD) showed the crystalline nature of formed NPs. Hence, this effort showed that hydrophobic drugs can be effectively encapsulated in nanoparticulate systems to enhance their solubility and stability, ultimately improving their bioavailability and effectiveness with better patient compliance by reducing dosing frequencies as well.
The aim of this study was to investigate the potential of Linum usitatissimum mucilage, a natural polymer, in developing a sustained release hydrogel for orally delivered drugs that require frequent dosing. For this purpose, nicorandil (a model drug)-loaded hydrogels with various feed ratios of Linum usitatissimum mucilage, acrylamide (monomer) and methylene bis-acrylamide (crosslinker) were prepared. The newly synthesized hydrogel formulations were probed fundamentally with respect to swelling behaviour, solvent penetration, and the release of the drug from the hydrogels. Later, the selected formulations were further characterized by Fourier-transform infrared spectroscopy, thermal analysis, X-ray diffraction analysis, and scanning electron microscopy. The swelling coefficient demonstrated a linear relation with the polymer ratio; however, an inverse behaviour in the case of monomer and crosslinker was observed. The drug release studies, performed at pH 1.2 and 4.5 and considering the dynamic environment of GIT, demonstrated that all formulations followed the Korsmeyer–Peppas model, displaying a slow drug release via diffusion and polymer erosion. FTIR analysis confirmed the successful grafting of acrylamide on linseed mucilage. Furthermore, scanning electron microscopy revealed a clear surface morphology with folds and pinholes in the hydrogel. Therefore, based upon the in-vitro outcomes, it can be concluded that a promising sustained release hydrogel can be prepared from natural polymer, Linum usitatissimum mucilage, offering many-fold benefits over the conventional synthetic polymers for oral delivery of drugs.
The present study was conducted to fabricate and characterize mucilage-based polymeric networks of Aloe vera for controlled drug release. Aloe vera mucilage was used to develop a polymeric network via the free-radical polymerization method using potassium persulphate as the initiator, N′ N′-Methylene bisacrylamide as the crosslinker, and acrylamide as the monomer. Using varying concentrations of Aloe vera mucilage, crosslinker, and monomer, we developed different formulations. Swelling studies were conducted at pH 1.2 and 7.4. Concentrations of polymer, monomer, and crosslinker were optimized as a function of swelling. Porosity and gel content were calculated for all samples. FTIR, SEM, XRD, TGA, and DSC studies were conducted for the characterization of polymeric networks. Thiocolchicoside was used as a model drug to study the in vitro release in acidic and alkaline pH. Various kinetics models were applied by using a DD solver. Increasing content of monomer and crosslinker swelling, porosity, and drug release decreased while gel content increased. An increase in Aloe vera mucilage concentration promotes swelling, porosity, and drug release of the polymeric network but decreases gel content. The FTIR study confirmed the formation of crosslinked networks. SEM indicated that the polymeric network had a porous structure. DSC and XRD studies indicated the entrapment of drugs inside the polymeric networks in amorphous form. The analytical method was validated according to ICH guidelines in terms of linearity, range, LOD, LOQ, accuracy, precision, and robustness. Analysis of drug release mechanism revealed Fickian behavior of all formulations. All these results indicated that the M1 formulation was considered to be the best polymeric network formulation in terms of sustaining drug release patterns.
In order to evaluate anti-inflammatory role of eucalyptol (100, 200, and 400 mg/kg orally), inflammation was induced in rats using 0.1 ml of histamine and 0.1 ml of formaldehyde. Furthermore, in vivo gastroprotective potential of eucalyptol (100, 200 and 400 mg/kg) was determined via the intraperitoneal injection of 25 mg/kg indomethacin as an ulcerative agent and omeprazole (30 mg/kg) orally as a standard. Estimation of biochemical (PGE2, ICAM-1, COX-I, COX-II, eNOS and 5-LOX) and oxidative stress (SOD, CAT, GSH, and MDA) markers were carried out in gastric tissues using ELISA. The morphological and histopathological features of the gastric tissues were studied. In vitro, eucalyptol stabilized red blood cell membranes and inhibited protein denaturation, with the maximum effect observed at a concentration of 6400 μg/mL. Eucalyptol significantly reduced rat paw edema in histamine- and formaldehyde-induced inflammation models. It increased gastric PGE2, COX-I and eNOS levels, and decreased COX-II, 5-LOX and ICAM-1. Eucalyptol reduced ulcer indices and improved histopathological changes. Eucalyptol also increased antioxidants levels with decreased MDA levels in isolated rat stomach tissues. Therefore, eucalyptol shows gastroprotective effects against histamine- and formaldehyde induced inflammation and indomethacin-induced gastric ulcers through the modulation of the COX/LOX, ICAM-1, eNOS pathways and oxidative stress biomarkers.
The primary objective of this study was to assess the potential utility of quince seed mucilage as an excipient within a graft copolymer for the development of an oral-controlled drug delivery system. The Cydonia oblonga-mucilage-based graft copolymer was synthesized via a free radical polymerization method, employing potassium per sulfate (KPS) as the initiator and N, N-methylene bisacrylamide (MBA) as the crosslinker. Various concentrations of monomers, namely acrylic acid (AA) and methacrylic acid (MAA), were used in the graft copolymerization process. Metoprolol tartarate was then incorporated into this graft copolymer matrix, and the resultant drug delivery system was subjected to comprehensive characterization using techniques such as Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The swelling behavior of the drug delivery system was evaluated under different pH conditions, and in vitro drug release studies were conducted. Furthermore, pharmacokinetic parameters including the area under the curve (AUC), maximum plasma concentration (Cmax), time to reach Cmax (Tmax), and half-life (t1/2) were determined for metoprolol-loaded hydrogel formulations in rabbit plasma, and these results were compared with those obtained from a commercially available product. The key findings from the study include observations that higher concentrations of acrylic acid (AA) and Cydonia oblonga mucilage (CM) in the graft copolymer enhanced swelling, while the opposite trend was noted at elevated concentrations of methacrylic acid (MAA) and N, N-methylene bisacrylamide (MBA). FTIR analysis confirmed the formation of the graft copolymer and established the compatibility between the drug and the polymer. SEM imaging revealed a porous structure in the prepared formulations. Additionally, the swelling behavior and drug release profiles indicated a pH-sensitive pattern. The pharmacokinetic assessment revealed sustained release patterns of metoprolol from the hydrogel network system. Notably, the drug-loaded formulation exhibited a higher Cmax (156.48 ng/mL) compared to the marketed metoprolol product (96 ng/mL), and the AUC of the hydrogel-loaded metoprolol was 2.3 times greater than that of the marketed formulation. In conclusion, this study underscores the potential of quince seed mucilage as an intelligent material for graft-copolymer-based oral-controlled release drug delivery systems.