This article proposes a method to decentralize the navigation burden and improve the fault tolerance for a spacecraft constellation. The constellation body reference system is introduced, which is the perifocal frame of one satellite in the constellation. The structure of the proposed navigation method is constructed to enable each spacecraft to estimate its own orbit in this body reference system. This step is essentially the relative orbit determination (OD) based on inter-satellite range measurements. Thereafter, the approach to transfer an orbit from the constellation body reference system to an inertial reference system is developed. The essential requirements on absolute measurements to realize the coordinate transfer are presented. By dividing the absolute OD into relative OD and coordinate transfer, each navigation subsystem operated in a spacecraft can be independent with others, and the absolute measurements collected by any spacecraft can contribute to the absolute OD of the whole constellation. The proposed method applies to constellations in any geometric configuration. A Walker constellation is taken as an example for numerical simulations. The results show that the proposed method has a lower computation burden compared to an integrated navigation system. With the same type of absolute measurements, the proposed method has higher accuracy and convergence velocity than conventional decentralized algorithms. When a spacecraft occurs with fault, the orbit results of other spacecraft are not affected using the proposed method, which is beyond the ability of conventional methods.
This paper proposed a polynomial representation-based method for orbit determination (OD) of spacecraft with the unknown maneuver. Different from the conventional maneuvering OD approaches that rely on specific orbit dynamic equation, the proposed method needs no priori information of the unknown maneuvering model. The polynomials are used to represent the unknown maneuver. A transformation is made for the polynomials to improve the convergence and robustness. The Extended Kalman Filter (EKF) is used to process incoming observation data by compensating the unknown maneuver using the polynomials. The proposed method is successfully applicated into the OD problem of spacecraft with trigonometric maneuver. Numerical simulations show that the eighth-order polynomials are accurate enough to represent a trigonometric maneuver. Moreover, Monte Carlo simulations show that the position errors are smaller than 1 km, and the maneuver estimated errors are no more than 0.1 mm/s2 using the eighth-order polynomials. The proposed method is accurate and efficient, and has potential applications for tracking maneuvering space target.
14 April 2022 in IEEE Transactions on Aerospace and Electronic Systems
An increasing demand for investigating the solar system has envisioned many asteroid exploration missions.Optical navigation is the principal technology to determine the explorers orbit relative to an asteroid when approaching it in an exploration mission. The approaching orbit determines the observing conditions and consequently affects the optical navigation accuracy. Aiming at improving the optical navigation performance, this paper proposes the approach orbit optimization method considering optical navigation observability. The defect of the optical navigation along the line-of-sight (LOS) direction when the explorer moves along the conventional approaching orbit is revealed. The quantitative index of the navigation performance is designed by deriving the Fisher Information Matrix. The orbit optimization problem is constructed by involving the elements of Fisher information matrix and fuel consumption together into the optimization index, and setting up the necessary engineering constraints. Numerical simulations show that compared with the conventional fuel-optimal cases, the navigation along the LOS direction is greatly improved. The navigation accuracy is improved from 86% to 99% and an additional 1.62 kg of fuel is consumed. The proposed method can effectively improve the navigation performance and has promising applications in asteroid approach trajectory design in the future asteroid exploration missions.
This paper proposed a novel multi-spacecraft tracking and data association method based on the orbit uncertainty propagation. The proposed method makes full use of the dynamic information and thus the data association performance is enhanced. The proposed method is divided into three portions, i.e., the uncertainty propagation, the data association, and the orbit estimation. The second-order solutions derived for state and measurement prediction, on which to base the optimal association, are set up. The optimal association is solved by the contract network algorithm to reduce the computing cost. Finally, a second-order extended Kalman filter is designed to estimate the orbit of each spacecraft. The proposed method is successfully applied for solving a four-spacecraft tracking problem. Simulations show that all the four targets are well tracked. The method demonstrates close to 100% data association precision. The proposed method is proved to be efficient and effective to solve the multi-spacecraft tracking problem.
Cooperative orbit determination (OD) using inter-spacecraft optical measurements is an important technology for space constellation missions. In this paper, the observability of a two-spacecraft cooperative OD system is investigated. The influence of geometric configuration on the observability is analyzed, and two special unobservable configurations are identified. Then, an approach to improve the observability by involving an additional spacecraft is proposed. Comparative analysis of system observability shows that an extra spacecraft in the system could change the coplanar and symmetric configuration and improve the observability of the cooperative OD system. Monte-Carlo simulations are carried out, and results verify the observability improvement conclusion.
Aerocapture maneuvers refer to a single atmospheric crossing to deplete orbital energy and establish a closed orbit. During the atmospheric flight, adjusting the spacecraft’s vertical lift component in an optimal manner, bang-bang bank control, will minimize the propulsion fuel consumption required to establish the target orbit. However, such methods have been suffering from the performance’s oversensitivity to the control’s instantaneous switching time and poor robustness. To address these problems, we propose a new numerical predictor-corrector guidance algorithm based on the saturation function profile in this paper. The saturation function is used to basically simulate the bang-bang control structure, which enhances the algorithm’s robustness by reducing its dependence on the relevant parameters without losing too much optimality. Monte Carlo simulations in both Earth and Mars scenarios demonstrate the robustness, accuracy, and near-optimal performance of the proposed guidance method.