Yao Zhang

Prof. Yao Zhang

orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
LCLiangze Cui
Liangze Cui
YZYao Zhang
Yao Zhang
RZRunren Zhang
Runren Zhang
QLQing Huo Liu
Qing Huo Liu
Effective machine learning methods are usually trained by large datasets to guarantee accuracy and avoid overfitting. However, large datasets restrict the popularization of machine learning methods when the data acquisition is nontrivial. To solve this problem, a novel machine learning method is proposed in this paper based on the modified K-Nearest Neighbors (KNN) algorithm, which can extract more features from datasets through advanced workflow and simulation techniques. In the applications presented here, our method is 5 to 30 times faster than traditional machine learning methods such as artificial neural network (ANN) and Bayesian optimization by reducing the required size of datasets. The proposed method is then employed to optimize the antenna parameters, while an additional branch is built to run the simulation tools (e.g. HFSS) and update the dataset during the training process instead of constructing the dataset beforehand. The validity and efficiency of this proposed method are confirmed by four different antenna examples and other machine learning and gradient-based algorithms. In summary, the proposed method can obtain a satisfactory optimal antenna design at little cost.

2 August 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
CDChao Feng Ding
Chao Feng Ding
XZXiu Yin Zhang
Xiu Yin Zhang
YZYao Zhang
Yao Zhang
YPYong Mei Pan
Yong Mei Pan
QXQuan Xue
Quan Xue
This paper presents a broadband dual-polarized filtering dipole antenna for base-station application, which has a compact size of 50 $\text {mm} \times 50\,\,\text {mm} \times 31.8$ mm. The antenna consists of four parts: main radiator, feeding baluns, reflector, and two parasitic loops. Without using complex filtering circuits, the dual-polarized dipole antenna realizes satisfactory filtering performance and enhanced bandwidth by employing only two parasitic loops. Two specific radiation nulls are thus generated and individually controlled by the two parasitic loops. To further improve the upper stopband selectivity and bandwidth, a simple open-ended stub is added to the arms of the dipole. As a result, the bandwidth can be tuned from 7.4% to 47.6%, and the realized gain is decreased dramatically from 8.6 dBi at 2.7 GHz (in-band) to −10 dBi at 2.9 GHz (out-of-band). For demonstration, a broadband dual-polarized dipole antenna is implemented. Measured results show that the proposed antenna has more than 34 dB port isolation over 48.7% (1.66–2.73 GHz) impendence bandwidth (VSWR < 1.5). The measured in-band gain is about 8.15 dBi with stable 3 dB beamwidth 65.4°±2.4° in the horizontal plane, whereas the out-of-band radiation suppression is more than 17 dB.

2 July 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SYSheng Jie Yang
Sheng Jie Yang
YPYong Mei Pan
Yong Mei Pan
YZYao Zhang
Yao Zhang
Yue GaoYue Gao
Yue Gao
XZXiu Yin Zhang
Xiu Yin Zhang
This paper presents a novel low-profile dual-polarized magneto-electric (ME) dipole antenna with bandpass filtering response. The proposed ME-dipole antenna consists of four shorted patches, in which the magnetic dipole mode is formed by the slot-aperture between patches. Therefore, the height of antenna is not limited to 0.25λc but can be as low as 0.11λc. By symmetrically inserting four slots on the patches, a wide impedance bandwidth is obtained, and a controllable radiation null is generated at the upper band-edge to enhance the out-of-band suppression level. On the other hand, by properly designing the length of the feeding lines, another controllable radiation null and its second harmonic null are generated on each side of the passband, improving the selectivity and suppression level of both the lower and upper stopbands without degrading the in-band performance. The measured results show that the prototype has a ?15 dB impedance bandwidth of 27.6%, covering the specific 5G NR band n65 (3.3?4.2 GHz). In addition, the in-band average gain is 8.2 dBi and the out-of-band suppression level is more than 20 dB.

5 January 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YZYao Zhang
Yao Zhang
XZXiu Yin Zhang
Xiu Yin Zhang
YPYong-Mei Pan
Yong-Mei Pan
This paper presents a low-profile planar dipole antenna with omnidirectional radiation pattern and filtering response. The proposed antenna consists of a microstrip-to-slotline transition structure as the feeding network and a planar dipole as the radiator. Filtering response is obtained by adding non-radiative elements, including a coupled U-shaped microstrip line and two I-shaped slots, to the feeding network. Within the operating passband, the added non-radiative elements do not work and thus the in-band radiation performance of the dipole antenna is nearly not affected. However, at the side stopbands, the added elements resonate and prevent the signal passing through the feeding network to the dipole antenna, suppressing the out-of-band radiation significantly. As a result, both satisfactory filtering and radiation performances are obtained. For demonstration, an omnidirectional filtering dipole antenna is implemented. Single-band bandpass filtering responses in both the reflection coefficient and realized gain are obtained. The measured in-band gain is ~2.5 dBi, whereas the out-of-band radiation suppression is more than 15 dB.

2 June 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YZYao Zhang
Yao Zhang
XZXiu-Yin Zhang
Xiu-Yin Zhang
QLQing Huo Liu
Qing Huo Liu
This article presents an effective design method to integrate bandpass filtering response into an aperture-fed dual-polarized magnetoelectric dipole (ME-dipole) antenna. The antenna is composed of a traditional ME-dipole radiator and a modified aperture-coupled feeding structure. In one aspect, highpass filtering radiation response is realized by approximating the antenna radiator as a highpass filter network. In another aspect, by developing an improved aperture-coupled feeding structure with lowpass filter characteristics, the antenna obtains lowpass filtering radiation response. As a result, bandpass filtering radiation response is achieved. Since no intricate filter resonators are used, the in-band antenna gains are not degraded. The highpass/lowpass filter networks are studied and specific radiation nulls generated by the two networks are analyzed. For demonstration, a single-polarized model is presented first and its working mechanism is studied in detail. It realizes a 78.6% impedance bandwidth, flat in-band gains of 7.5–7.8 dBi, and more than 22 dB out-of-band radiation suppression level. Then, based on the same methodology, a dual-polarized antenna model i developed with 69.3% operating bandwidth, 7.1–9.3 dBi measured in-band gains, and integrated bandpass filtering radiation response.

25 January 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
LYLiang Hua Ye
Liang Hua Ye
YZYao Zhang
Yao Zhang
XZXiu Yin Zhang
Xiu Yin Zhang
QXQuan Xue
Quan Xue
This communication presents a broadband horizontally polarized (HP) omnidirectional antenna array with low gain variation for base-station applications. It consists of six omnidirectional antenna units. In order to generate HP omnidirectional radiation patterns for each unit, three wideband planar dipoles are employed as basic elements and they are connected by a wideband three-way power divider with equal magnitude and phase, conducting as a loop antenna. Based on such a configuration, the antenna unit obtains an HP omnidirectional pattern as well as a wide bandwidth of 48.2% (VSWR <; 1.5 within 1.67-2.73 GHz). However, the gain variation is more than 2.5 dB, which is relatively large. To reduce the gain variation, a novel approach is proposed by dividing the six antenna units into three unit pairs. Each unit pair consists of two antenna units which are complementary in radiation pattern. Using this method, the number of basic elements in each antenna unit is not increased, but the simulated gain variation is effectively reduced to about 1.24 dB.