This study aims to address the environmental impact of using common commercial hydrate inhibitors such as Methanol (MeOH) in extremely cold oil and gas environments. As a greener alternative, Pectic Polysaccharides (pectin) can act as a kinetic hydrate inhibitor (KHI) to delay hydrate formation. We evaluated the performance of amidated pectin (AMP), a type of pectin with higher electronegative functional groups, using a high-pressure micro-differential scanning calorimeter (HP µ-DSC) under isobaric conditions with constant cooling. We compared AMP to low-methoxylated pectin (LMP) and high-methoxylated pectin (HMP) and found that AMP was the best KHI among the tested pectin types. At a concentration of 1.0 wt.%, the AMP Relative Inhibitor Performance (RIP) was 0.10, and at 0.1 wt.%, it had an RIP of 0.07, which were the only positive RIPs obtained amongst the tested KHIs. The results suggest that AMP can be a sustainable KHI option in extremely cold environments where the KHI effectiveness typically declines.
In the present study, the conversion performance of hydrogen sulfide (H2S) to elemental sulfur in ionic-liquid-incorporated transition metals (ILTMs) is predicted using a conductor-like screening model for realistic solvents (COSMO-RS). The predictions were made via the establishment of a correlation between the conversion performance and solubility of H2S in ionic liquids (ILs). All molecules involved were optimized at the DFT/TZVP/M06 computational level and imported on the COSMOtherm program at equimolar conditions. For validation purposes, the solubility of ILs was predicted at 1 bar pressure. Simple regression analysis was used to establish a relationship between the solubility and conversion performance of H2S. The results indicate that the solubility prediction of ILs is accurate (R2 = 93.40%) with a p-value of 0.0000000777. Additionally, the conversion performance is generally found to be dependent on the solubility value. Furthermore, 1-butyl-3-methylimidazolium chloride [bmim][Cl] was chosen as the base IL for incorporating the transition metal, owing to its solubility and selectivity to H2S. The solubility trend of ILTMs is found to follow the following order: [bmim][NiCl3] > [bmim][FeCl4] > [bmim][CoCl3] > [bmim][CuCl3]. According to the viscosity measurements of ILTMs, [bmim][NiCl3] and [bmim][FeCl4] exhibited the highest and lowest viscosity values, respectively. Therefore, [bmim][FeCl4] is a promising ILTM owing to its higher solubility and low viscosity for the application studied.
7 February 2024 in Journal of Advanced Research in Applied Sciences and Engineering Technology
H2S is very well known for its toxicity, corrosivity, flammability and explosiveness which in overall lead to operational difficulty. Hence, raising the need for H2S sweetening process. However, the current conventional sweetening process is very energy intensive besides suffer from catalyst deactivation issue. Therefore, raising the need for more environmentally and economical friendly approach such as utilizing green solvent like deep eutectic solvent. Thus, the objective of this research is to determine the best combination of HBD and HBA components for catalytic DESs to convert H2S at room temperature. The study utilized COSMO-RS computational to assist in selecting the appropriate components, synthesized and characterized the chosen catalytic DES, and performed oxidative absorption of H2S using the selected DES. Initially, the solubility and selectivity performance of various HBD and HBA were evaluated, and the components with the best performance were combined with CuCl2.2H2O to form catalytic DES. The synthesized catalytic DES was characterized using FTIR and tested for its oxidation absorption capability. Based on the COSMO-RS screening, 1-butyl-3-methylimidazoilum chloride [bmim][Cl] and ethylene glycol [EG] were determined to be the best HBD and HBA, respectively. The catalytic DES formed from these components was homogeneous and brown in colour. The results of oxidative absorption showed that the catalytic DES rapidly produced a yellow precipitate, which was later confirmed to be sulphur. The study concludes that COSMO-RS computational can be used to formulate DESs for H2S oxidative absorption, and catalytic DES maintained its properties before and after H2S oxidation. The research also suggests that oxidative absorption of H2S to sulphur using catalytic DESs is a feasible and rapid.