A strong metal-support interaction (SMSI) type catalyst has been synthesized and applied to a molten hydroxide direct carbon fuel cell (MHDCFC) to enhance the reaction activity of the anode carbon fuel through the interaction between the metal Ni and the support CeO2. Two catalysts have been prepared by a direct precipitation method (denoted NiO@CeO2) and a hydrothermal method (denoted NiO-CeO2), which are reduced by H2 to obtain Ni@CeO2 and Ni-CeO2, respectively. X-ray photoelectron spectroscopy (XPS), Raman, and temperature-programmed hydrogen reduction (H2-TPR) analysis results show that there are obvious oxygen vacancies and a Ni-O-Ce interface structure in NiO-CeO2 and Ni-CeO2, which is induced by the interaction between Ni and CeO2. The calculation results of current density and power density show that the performance of the MHDCFC is significantly improved in the presence of Ni-CeO2. The function fitting curves of the logarithm of the reaction rate constant (ln k) and the reciprocal of the temperature (1/T) show that the slope of the curve is decreased significantly after the addition of Ni-CeO2. In combination with density functional theory (DFT), the anode carbon reaction path is simulated in the MHDCFC, and the calculation results show that the reaction energy for the anodic carbon to generate carbon dioxide is decreased by 1.03 eV in the presence of Ni-CeO2.
Replacing the commercial graphite anode in Li-ion batteries with pseudocapacitor materials is an effective way to obtain high-performance energy storage devices. α-MoO3 is an attractive pseudocapacitor electrode material due to its theoretical capacity of 1117 mAh g−1. Nevertheless, its low conductivity greatly limits its electrochemical performance. MXene is often used as a 2D conductive substrate and flexible framework for the development of a non-binder electrode because of its unparalleled electronic conductivity and excellent mechanical flexibility. Herein, a free-standing α-MoO3/MXene composite anode with a high specific capacity and an outstanding rate capability was prepared using a green and simple method. The resultant α-MoO3/MXene composite electrode combines the advantages of each of the two components and possesses improved Li+ diffusion kinetics. In particular, this α-MoO3/MXene free-standing electrode exhibited a high Li+ storage capacity (1008 mAh g−1 at 0.1 A g−1) and an outstanding rate capability (172 mAh g−1 at 10 A g−1), as well as a much extended cycling stability (500 cycles at 0.5 A g−1). Furthermore, a full cell was fabricated using commercial LiFePO4 as the cathode, which displayed a high Li+ storage capacity of 160 mAh g−1 with an outstanding rate performance (48 mAh g−1 at 1 A g−1). We believe that our research reveals new possibilities for the development of an advanced free-standing electrode from pseudocapacitive materials for high-performance Li-ion storage.
20 February 2014 in Journal of Inorganic Materials
The Li-ion hybrid capacitor (LIHC) is considered as a promising candidate for electrochemical energy storage owing to the high energy and power density. However, the sluggish anodic reaction kinetics and high reaction voltage greatly hinder the overall performance of LIHCs. Herein, a free-standing VN/MXene composite anode with high specific capacity and low reaction voltage was prepared by a simple vacuum filtration method. The obtained VN/MXene composite anode shows a high discharge specific capacity of 501.7 mA h g−1 at 0.1 A g−1 and excellent rate capability (191.8 mA h g−1 at 5 A g−1), as well as much extended cycling stability (1500 cycles at 2 A g−1). When combined with an egg white-derived activated carbon (E-AC) cathode, the assembled LIHC delivers a high specific capacity of 59.1 F g−1 and a high energy density of 129.3 W h kg−1 with a power density of 449.7 W kg−1. Even at a high current density of 5 A g−1, the LIHC still maintains an exciting energy density of 42.81 W h kg−1 at 11 249 W kg−1. Meanwhile, the cycling life can be extended to 5000 cycles with a high capacity retention of 98% at 1 A g−1. We believe that this work opens up new possibilities for developing advanced free-standing MXene-based electrodes for Li-ion storage.
1 February 2014 in Korean Journal of Chemical Engineering