Rogue waves are a recognized but not fully comprehended hazard of major concern to the maritime industry. There is not one agreed-upon unified model that explains the formation of such waves and little is known about their frequency of occurrence. This study used in situ data from a wave buoy located at the entrance of Tampa Bay, Florida, to assess conditions that could lead to the development of these potentially destructive waves. Tampa Bay is a major commercial and transportation hub on the east coast of the United States. Wave buoy data from 2015 to 2019 were analyzed in this study. While more than 7000 individual waves that significantly exceeded median values were recorded, only 32 exceeded 4 m, thereby imposing risks to local navigation. The largest rogue wave that was recorded was 8.46 m high. Parameters in the time and frequency domains were calculated, local wind and surface current data were correlated, satellite synthetic-aperture radar (SAR) and vessel traffic data were analyzed, and the local bathymetry was considered. Based on our results, the narrow directional wave spreading that was found on the selected rogue waves was recognized as an important indicator of extreme waves. The parameters: surface elevation kurtosis, Benjamin–Feir Index (BFI), wave steepness, broadness, and narrowness factors, wind speed and direction, can be considered together, as a part of a local extreme-wave warning package. The selected individual rogue waves could not be identified using SAR imagery. Regional disturbances from ship wakes were analyzed but yielded no connections to the local formation of rogue waves.
1 October 2015 in Renewable and Sustainable Energy Reviews
A comparative analysis of rogue wave occurrence was conducted by examining reported eye-witness incidents against ERA5 reanalysis data and ECMWF CY47R1 wave model hindcast data. The study utilized a unique dataset of 440 rogue wave incidents, analyzing sea state conditions within a 72-hour window surrounding each event, due to the challenge of pinpointing the exact time of occurrence. A marked discrepancy was observed between the datasets, with ERA5 identifying 25 rogue waves and ECMWF CY47R1 identifying 301 rogue waves, defined as waves with maximum height at least twice the significant wave height. This difference may be attributed to the sensitivity of the hindcast data to its wave-focused modeling and finer spatial resolution. Spectral characteristics related to rogue waves such as kurtosis, peakedness, skewness, and the Benjamin-Feir Index, while showing low correlation between the models, did not significantly diverge in absolute values, suggesting an underlying consistency. The study highlights the robustness of the crest-trough correlation parameter in identifying rogue waves, aligning with theories of linear superposition. These insights are pivotal for enhancing rogue wave prediction models and maritime safety assessments, with broader implications for the reliability of reanalysis and model data as detectors of rogue wave occurrence.
Rogue waves pose substantial risks to maritime operations and offshore infrastructure, yet their formation mechanisms and predictability remain poorly understood. This study analyses real rogue wave occurrences using in situ observations from CDIP wave buoys from the Free Ocean Wave Data (FOWD) dataset and model-based estimates from ERA5 reanalysis and the ECMWF CY47R1 high-resolution hindcast. Seasonal distributions, wave height comparisons, and spectral analyses reveal that models systematically underestimate extreme wave events due to spectral smoothing and spatial averaging. A key finding is that rogue waves are usually preceded by a sharp decrease in crest-trough correlation below 0.5, followed by a rapid increase usually above 0.6, indicating a transition to a more structured wave field. This pattern, accompanied by spectral bandwidth narrowing and increased relative energy in the 0.25–1.5 Hz range, suggests energy focusing mechanisms play a critical role. Analysis of rogue wave events at four CDIP buoy stations show that the crest-trough correlation parameter alone is not a good rogue wave indicator, but its temporal variability is. These results highlight the need for improved modelling by integrating dynamic wave field specific parameters and high-resolution numerical models to enhance rogue wave risk assessments on a global scale.
Rogue waves pose substantial risks to maritime operations and offshore infrastructure, yet their formation mechanisms and predictability remain poorly understood. This study analyses real rogue wave occurrences using in situ observations from CDIP wave buoys from the Filtered Ocean Wave Data (FOWD) dataset and model-based estimates from ERA5 reanalysis and the ECMWF CY47R1 high-resolution hindcast. Seasonal distributions, wave height comparisons, and spectral analyses reveal that models systematically underestimate extreme wave events due to spectral smoothing and spatial averaging. A key finding is that rogue waves are usually preceded by a sharp decrease in crest-trough correlation below 0.5, followed by a rapid increase above 0.6, indicating a transition to a more structured wave field. This pattern, accompanied by spectral bandwidth narrowing and increased relative energy in the 0.25–1.5 Hz range, suggests energy focusing mechanisms play a critical role. Analysis of rogue wave events at four CDIP buoy stations show that the crest-trough correlation parameter alone is not a good rogue wave indicator, but its temporal variability is. These results highlight the need for improved modelling by integrating dynamic wave field specific parameters and high-resolution numerical models to enhance rogue wave risk assessments on a global scale.
Rogue waves pose substantial risks to maritime operations and offshore infrastructure, yet their formation mechanisms and predictability remain poorly understood. This study analyses real rogue wave occurrences using in situ observations from CDIP wave buoys from the Filtered Ocean Wave Data (FOWD) dataset and model-based estimates from ERA5 reanalysis and the ECMWF CY47R1 high-resolution hindcast. Seasonal distributions, wave height comparisons, and spectral analyses reveal that models systematically underestimate extreme wave events due to spectral smoothing and spatial averaging. A key finding is that rogue waves are usually preceded by a sharp decrease in crest-trough correlation below 0.5, followed by a rapid increase above 0.6, indicating a transition to a more structured wave field. This pattern, accompanied by spectral bandwidth narrowing and increased relative energy in the 0.25–1.5 Hz range, suggests energy focusing mechanisms play a critical role. Analysis of rogue wave events at four CDIP buoy stations show that the crest-trough correlation parameter alone is not a good rogue wave indicator, but its temporal variability is. These results highlight the need for improved modelling by integrating dynamic wave field specific parameters and high-resolution numerical models to enhance rogue wave risk assessments on a global scale.