Several bridge piers were visited, and their scour hole was characterized into three zones: scour, transition, and mound zones. The observed onsite sorting and scouring patterns were recreated through flume experiments with varying pier aspect ratio (1:1, 1:2, 1:4 and 1:6) and sediment geometric standard deviation (σg). The experiments showed that maximum scour depth decreased with non-uniformity; 52.7 mm, 20.2 mm, and 16.6 mm are the respective maximum scour depth of beds with σg = 1.4, 2.5, and 5.2. While aspect ratio has minimal effect on maximum scour depth values, it has noticeable effects on scour shape and asymmetry. The location of the lowest point of the scour shifted further downstream as σg increased. The number of occurrences where the location of the lowest point is outside the upstream cylindrical hemisphere is zero (0) for σg = 1.4, three (3) for σg = 2.5, and five (5) for σg = 5.2. The observed processes of upstream-to-downstream propagation of scour may explain the gradual decrease in fines on the surface, as well as the asymmetry of the scour, confirming the role of combined effects of grading of the bed material and piers’ aspect ratio in the scour-forming process.
1 January 2005 in KSCE Journal of Civil Engineering
When analyzing the physical habitat in a river, it is necessary to understand its structure hierarchically. This paper focuses on a riffle structure in a middle reach of a river. Firstly, as a unit scale analysis, we classified the riffles based on its plane shape. Plane shape of a riffle is determined by the condition of sandbar that is affected by the amount of transported sediment. And plane shape of a riffle determines the distribution of local discharge in a riffle. Next, as a subunit analysis, we clarified the typical distribution pattern of longitudinal and lateral gradient of riverbed and gravel structure in a riffle. And the distribution of longitudinal and lateral gradient of riverbed is determined by the common feature of sandbar shape. Finally, as a point scale analysis, we showed the examples of wave pattern on each subunit. Wave pattern is related to the hydraulic conditions, so it represents the habitat condition for fishes, macro invertebrates and attached algae. Based on this analysis, it is possible to understand the microhabitat condition in relation to the amount of sediment, river shape, and scale of floods that can be controlled in river management.
1 January 2017 in Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering)