In this review, we present an overview of significant developments in the field of in situ and operando (ISO) X-ray imaging of solidification processes. The objective of this review is to emphasize the key challenges in developing and performing in situ X-ray imaging of solidification processes, as well as to highlight important contributions that have significantly advanced the understanding of various mechanisms pertaining to microstructural evolution, defects, and semi-solid deformation of metallic alloy systems. Likewise, some of the process modifications such as electromagnetic and ultra-sound melt treatments have also been described. Finally, a discussion on the recent breakthroughs in the emerging technology of additive manufacturing, and the challenges thereof, are presented.
Density variations arising from thermal and compositional gradients in multi-component fluids can lead to natural convection flows. The double-diffusive layer is one such flow phenomenon, commonly observed in oceanic and phase change systems. The solidification of high Prandtl number fluids offers a suitable platform to study multi-diffusive convection owing to continuously evolving temperature and compositional fields. In this work, an experimental investigation was conducted to study the influence of transport phenomena on the double-diffusive layer formation, by performing full-field measurements of concentration and flow velocities during bottom-cooled solidification of a hyper-eutectic aqueous mixture. Using a Mach-Zehnder interferometer, the first-ever real-time, quantitative observations of solutal mixing, plume formation, and the evolution of the double-diffusive layers by forming a stepped compositional distribution have been reported. In addition, the associated flow velocities were measured using the particle image velocimetry technique which clearly characterizes the compositional and thermal natural convection patterns along the vertical and horizontal directions, respectively. The study revealed a life-cycle for the existence of the double-diffusive layers, wherein they undergo onset, development, and disappearance depending on the initial composition, and identified critical Rayleigh numbers for each of these stages. The experimental observations were further supported with analytical scale estimates of the critical length, time, and velocities of the system. The quantitative results elucidate the conditions, including a newly hypothesized threshold composition difference, which led to the formation as well as the disappearance of the layers.
17 April 2020 in Journal of Manufacturing Science and Engineering
Direct laser metal deposition (DLMD) is a promising additive manufacturing technique which has a huge potential in remanufacturing and restoration of high value dies/molds and aerospace components. The residual stresses developed in the material deposited via DLMD affect the structural integrity of the restored components. The service life of the restored component will be compromised if tensile residual stresses are present in the deposited layer. The residual stresses originate due to differential thermal expansion/contraction and martensitic transformation driven volumetric dilation and transformation induced plasticity. The influence of martensitic transformation and processing conditions on the residual stresses of DLMD processed components needs to be understood and modeled for sustainable repair. Hence, a finite element model has been developed to capture the coupled effect of thermomechanics and martensitic transformation on the evolution of residual stresses in DLMD. In this study, the individual and coupled effects of strains due to volume dilation and transformation induced plasticity on residual stress evolution have been analyzed for deposition of CPM9V on H-13 tool steel. The finite element model has been experimentally validated using X-ray and neutron diffraction. The inclusion of both transformation strains in the residual stress decreases the prediction errors of peak tensile residual stress from ∼48% to ∼15%. The fully coupled thermomechanical and metallurgical model has been used to obtain a critical linear mass density corresponding to the onset of a fully compressive longitudinal residual stress state in the deposited layer to ensure sustainable repair.
1 October 2016 in International Journal of Heat and Mass Transfer