Data augmentation is a crucial technique for convolutional neural network (CNN)-based object detection. Thus, this work proposes BoxPaste, a simple but powerful data augmentation method appropriate for ship detection in Synthetic Aperture Radar (SAR) imagery. BoxPaste crops ship objects from one SAR image using bounding box annotations and pastes them on another SAR image to artificially increase the object density in each training image. Furthermore, we dive deep into the characteristics of the SAR ship detection task and draw a principle for designing a SAR ship detector—light models may perform better. Our proposed data augmentation method and modified ship detector attain a 95.5% Average Precision (AP) and 96.6% recall on the SAR Ship Detection Dataset (SSDD), 4.7% and 5.5% higher than the fully convolutional one-stage (FCOS) object detection baseline method. Furthermore, we also combine our data augmentation scheme with two current detectors, RetinaNet and adaptive training sample selection (ATSS), to validate its effectiveness. The experimental results demonstrate that our newly proposed SAR-ATSS architecture achieves 96.3% AP, employing ResNet-50 as the backbone. The experimental results show that the method can significantly improve detection performance.
Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood (BML) algorithm. However, the difference beam is rarely used in super-resolution methods, especially in low elevation estimation. The target airspace information in the difference beam is different from the target airspace information in the sum beam. And the use of difference beams does not significantly increase the complexity of the system and algorithms. Thus, this paper applies the difference beam to the beamformer to improve the elevation estimation performance of BML algorithm. And the direction and number of beams can be adjusted according to the actual needs. The theoretical target elevation angle root means square error (RMSE) and the computational complexity of the proposed algorithms are analyzed. Finally, computer simulations and real data processing results demonstrate the effectiveness of the proposed algorithms.
25 February 2022 in IEEE Signal Processing Letters
This letter discusses the elevation angle estimation problem for a scene containing a direct and a reflected signal. Beamspace processing is an excellent candidate to reduce the computational burden of elevation angle estimation without affecting the multipath phase that contains the reflection coefficient phase and the phase difference between the direct and the reflected signals. In addition, the multipath phase is a function of the target elevation angle. With these considerations, we solve the multipath phase problem without searching within 3D beamspace data and therefore obtain the target elevation angle with a very low computational burden. Under the same prior information, the proposed algorithm manages an estimation accuracy similar to the ones requiring a search under the condition of a certain signal-to-noise ratio. Our evaluation results demonstrate the suitability of the proposed algorithm for engineering applications.
Airborne multiple‐input multiple‐output (MIMO) radar can transmit orthogonal waveforms to increase the range of the detection target. However, in a multipath environment, airborne MIMO radar also has energy radiated to the target through multipath directions, which makes the multipath phenomenon of airborne MIMO radar complicated. Because the direct path signal and the multipath signals of the airborne radar are at different range gates, the characteristics of data between the direct path signal and the multipath signals of the airborne MIMO radar can be used to propose a method for estimating the reflection coefficient amplitude (RCA). Considering that the target echoes data at different range gates can be used to estimate the elevation angle of the target, a direction of arrival (DOA) estimation method using data fusion at low signal‐to‐noise ratio (SNR) is proposed. Moreover, at high SNR, the signal path corresponding to the maximum target echo power is selected for DOA estimation based on the estimated multipath RCA. The proposed method makes full use of all target echo data of airborne MIMO radar in a multipath environment and is suitable for practical applications. Finally, simulation experiments verify that the proposed method can effectively improve the DOA estimation accuracy.
15 December 2021 in International Journal of Antennas and Propagation
Airborne phased array radar (PAR) suffers from multipath problems when flying over a calm sea surface. The existence of a multipath phenomenon will cause the electromagnetic echo of the same target to be reflected back to the airborne PAR from two paths, namely, direct path (DP) and multipath. Compared with the ground-based radar, the target echo received by airborne PAR in the multipath environment has two important characteristics: one is that the DP signal and the multipath signal exist in different range bins, and the other is that the radar cross section (RCS) in the DP direction may be smaller than that in the multipath direction. Considering these two characteristics, this paper first proposes a target pairing algorithm for matching the DP range and multipath range of the same target in signal detection, and then, combined with the cell-averaging constant false alarm rate (CA-CFAR) detection model, an incoherent integration detection method for airborne PAR in the multipath environment is proposed. In the target pairing process, the geometric structure relationship of the airborne PAR model can be fully utilized. After a successful target pairing process, the energy of the multipath signal will be incoherently accumulated into the corresponding DP range bin, so as to improve the probability of DP range bin data passing the detection threshold. In essence, the proposed method makes full use of multipath energy to improve the detection capability of airborne PAR in the multipath environment. Finally, the detection probability of the proposed method is given, and the detection performance is analyzed.