The rapid economic and societal development have led to unprecedented energy demand and consumption resulting in the harmful emission of pollutants. Hence, the conversion of greenhouse gases into valuable chemicals and fuels has become an urgent challenge for the scientific community. In recent decades, perovskite-type mixed oxide-based catalysts have attracted significant attention as efficient CO₂ conversion catalysts due to the characteristics of both reversible oxygen storage capacity and stable structure compared to traditional oxide-supported catalysts. In this review, we hand over a comprehensive overview of the research for CO₂ conversion by these emerging perovskite-type mixed oxide-based catalysts. Three main CO₂ conversions, namely reverse water gas shift reaction, CO₂ methanation, and CO₂ reforming of methane have been introduced over perovskite-type mixed oxide-based catalysts and their reaction mechanisms. Different approaches for promoting activity and resisting carbon deposition have also been discussed, involving increased oxygen vacancies, enhanced dispersion of active metal, and fine-tuning strong metal-support interactions. Finally, the current challenges are mooted, and we have proposed future research prospects in this field to inspire more sensational breakthroughs in the material and environment fields.

A novel magnetic bio-adsorbent was synthesized by modifying cotton linter (CL) cellulose with deep eutectic solvents (DESs) and Fe₃O₄ magnetic nanoparticles. And the adsorption mechanism of Cu²⁺ by Fe₃O₄/CL-DESs in aqueous solution was proposed.

Cotton fiber is favored by people because of its good moisture absorption, heat preservation, soft feel, comfortable wearing and other excellent performance. In recent years, due to the destruction of the ozone layer, the intensity of ultraviolet radiation at ground level has increased. Cotton fiber will degrade under long time ultraviolet irradiation, which limits the outdoor application of cotton fiber. In this study, titanium dioxide (TiO₂) particles were prepared on the surface of cotton fibers with the help of supercritical carbon dioxide (SCCO₂) to improve the UV resistance of cotton fibers. The effects of SCCO₂ treatment on the morphology, surface composition, thermal stability, photostability and mechanical properties of TiO₂ were studied by Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, thermogravimetric analysis, UV-VIS spectroscopy, and single fiber test. The results showed that TiO₂ particles were generated on the fiber surface, which reduced the photo-degradation rate of cotton fiber. This is because TiO₂ can absorb UV rays and reduce the absorption of UV rays by the cotton fiber itself. The synthesis process of SCCO₂ is simple and environmentally friendly, which provides a promising technology for the synthesis of metal nitrogen dioxide on natural plant fibers.

Cotton fibers with ultra-high purity cellulose are ideal raw materials for producing nanocellulose. However, the strong hydrogen bond and high crystallinity of cotton fibers affect the dissociation of cotton fibers to prepare nanocellulose. The structures of two kinds of cotton fibers (CM and XM) in different growth stages from 10 to 50 days post-anthesis (dpa) were studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). In the process of cotton fiber growth, the deposition rate of cellulose macromolecules firstly increased and then stabilized. Then, the surface morphology, the chemical composition, and the crystal structure of the nanocellulose prepared from cotton fibers with different growth stages by deep eutectic solvent, a green solvent, were characterized by Transmission Electron Microscope (TEM), scanning electron microscopy (SEM) analysis, XRD, and Thermo Gravimetry (TG). The growth time of cotton fibers affected the properties of prepared nanocellulose, and nanocellulose obtained from cotton fibers at about 30 dpa had less energy consumption, higher yield, and milder reaction conditions.

The analysis of changes in subcellular water distribution during mushroom fruiting is essential for elucidating the movement of water molecules within subcellular compartments. However, prior research on mushrooms has predominantly concentrated on alterations in water status during drying and postharvest processes in the food processing sector. Knowledge regarding subcellular water compartments throughout mushroom growth and fruiting remains limited. In the present study, the dynamics of subcellular water status across various growth stages of Agaricus bisporus were investigated using LF-NMR relaxometry. Three components were resolved from transverse relaxation curves, assigned to cell wall, cytoplasmic and vacuolar water, in both whole mushroom and mushroom tissues (stalk and Pileus). As fruiting body developed, the proton degree of freedom of three water fractions determined by T2 measurement all increased. The T2 values of three water fractions in stalk were higher than those in pileus during the first three stages, whereas they became lower compared to those in pileus from somewhere between the two stages of 2–3 and 3–4. Apparently different patterns of change in three water contents were observed, indicating the variations in water distribution at subcellular level. Furthermore, relative humidities caused obvious changes in water status. In addition, highly significant correlations were observed between T2 and textural parameters, indicating that the dynamics of water status exert a substantial influence on the formation of mushroom quality. A consistent increase in the transverse proton degree of freedom of three distinct water fractions, accompanied by markedly divergent patterns in the variations of the three water contents, was observed across different growth stages of fruiting bodies. Subsequently, highly significant correlations between T2 and textural parameters were established. This study would contribute to reveal macroscopic water transport within mushroom tissues and provide theoretical insights for optimizing high-quality mushroom cultivation.

Chemical regulation has beneficial effects on the growth, yield, and fiber quality of cotton with different plant architectures. This study aimed to investigate the combined effects of chemical regulators such as mepiquat chloride (1,1-dimethyl-piperidiniuchloride, DPC), chlormequat chloride (CCC), thidiazuron (TDZ), and ethephon (ETH) during the growth period of cotton. Different combinations of chemical regulators were applied to examine the growth, development, yield, and quality of cotton. The results showed that the application of different chemical regulators had varying effects on the yields of the two cotton varieties with distinct plant architecture. Specifically, K1C1 (before and after topping with 1:1 25% DPC, 50% TDZ, and 40% ETH) and K2C2 (before topping with 25% DPC and after topping with 50% CCC, 50% TDZ, and 40% ETH) were sprayed on ‘Wankemian-1’ and ‘Wanmian-191’, thereby increasing the cotton yield. The K2C2 treatment increased the upper half mean length and fiber strength of the two varieties but decreased the fiber length uniformity index. The fiber strength, fiber length uniformity index, and spinning consistency index of ‘Wankemian-1’ were higher than those of ‘Wanmian-191’. Based on comprehensive yield, quality, and economic benefits, K1C1 and K2C2 were determined to be the most effective chemical regulators of ‘Wankemian-1’ and ‘Wanmian-191’, respectively.