The authors report the detection of nitrous oxide gas using intracavity fiber laser absorption spectroscopy. A gas cell based on a hollow-core photonic crystal fiber was constructed and used inside a fiber ring laser cavity as an intracavity gas cell. The fiber laser in the 1.55 μm band was developed using a polarization-maintaining erbium-doped fiber as the gain medium. The wavelength of the laser was selected by a fiber Bragg grating (FBG), and it matches one of the absorption lines of the gas under investigation. The laser wavelength contained multilongitudinal modes, which increases the sensitivity of the detection system. N2O gas has overtones of the fundamental absorption bands and rovibrational transitions in the 1.55 μm band. The system was operated at room temperature and was capable of detecting nitrous oxide gas at sub-ppmv concentration level.
The authors demonstrated the fabrication of a fiber Bragg grating-like plasmonic nanostructure on the surface of a tapered optical fiber using gold nanorods (GNRs). A multimode optical fiber with core and cladding diameters of 105 and 125 μm, respectively, was used to make a tapered fiber using a dynamic etching process. The tip diameter was . Light from a laser was coupled to the untapered end of the fiber, which produced a strong evanescent field around the tapered section of the fiber. The gradient force due to the evanescent field trapped the GNRs on the surface of the tapered fiber. The authors explored possible causes of the GNR distribution. The plasmonic structure will be a good candidate for sensing based on surface enhanced Raman scattering.
1 November 2021 in Microwave and Optical Technology Letters
A three‐dimensional (3D) plasmonic substrate was developed using gold nanorods (GNRs) onto a tapered fiber surface using optical tweezing. To determine the efficacy of the substrate, Raman spectra of two toxic chemicals Rhodamine 6G (R6G) and Crystal Violet (CV) were studied. The “dip and dry” method was used to adsorb the chemicals along the tapered fiber length. The minimum concentration detected for CV and R6G was 10−12 M. We have reported the characteristics and unique features of the manufactured substrate.
23 September 2013 in Microwave and Optical Technology Letters
The authors developed plasmonic structures of zinc (Zn) and zinc oxide (ZnO) on the surface of a tapered optical fiber using optical tweezing. The powdered Zn or ZnO was added to gold nanorods (GNRs) solution and sonicated before tweezing. The concentration of the mixture was 0.5 µg/µl. The GNRs were present in the cetyltrimethylammonium bromide (CTAB) solution. The authors investigated the plasmonic structures and explored the effect of the tweezing conditions on the distribution of the Zn or ZnO on the tapered fiber surface.