Photopolymerizations, in which the initiation of a chemical-physical reaction occurs by the exposure of photosensitive monomers to a high-intensity light source, have become a well-accepted technology for manufacturing polymers. Providing significant advantages over thermal-initiated polymerizations, including fast and controllable reaction rates, as well as spatial and temporal control over the formation of material, this technology has found a large variety of industrial applications. The reaction mechanisms and kinetics are quite complex as the system moves quickly from a liquid monomer mixture to a solid polymer. Therefore, the study of curing kinetics is of utmost importance for industrial applications, providing both the understanding of the process development and the improvement of the quality of parts manufactured via photopolymerization. Consequently, this review aims at presenting the materials and curing chemistry of such ultrafast crosslinking polymerization reactions as well as the research efforts on theoretical models to reproduce cure kinetics and mechanisms for free-radical and cationic photopolymerizations including diffusion-controlled phenomena and oxygen inhibition reactions in free-radical systems.
Recently Thermal Frontal Polymerization (TFP) has emerged as a low-energy alternative, that enables rapid and energy-efficient manufacturing of composites. Thus, compared to conventional processes, this innovative curing and polymerization process exhibits improved efficiency and reduced environmental impact and provides a promising strategy to address sustainability challenges. However, successful TFP requires a delicate balance of reaction rates, exothermicity, and efficient heat transport into unpolymerized media while minimizing heat losses to the surroundings. In this context, sustaining TFP of polymers reinforced with highly conductive fillers is challenging due to the increased energy dissipation and reduced availability of exothermic energy as the filler content increases at the cost of resin volume. In this work, a numerical study of the TFP based manufacturing of Bisphenol A Diglycidyl Ether (BADGE) filled with Fe3O4 nanoparticles is presented. The simulation provides insight into the thermo-chemical process and into the impact of different particle filling degrees on the key characteristics of TFP, i.e., maximum attainable degree of cure, maximum temperature, front shape, and front speed.
In the production of electrical isolators based on thermosetting polymers, material is cured in a mould under temperature and pressure. As these products undergo a highly exothermic curing reaction during production an appropriate production control which considers the effects of the curing reaction is crucial, to ensure highest product quality. The objective of determining the physical parameters such as temperature and pressure in the workpiece during production was achieved by including sensors in a mould cavity. The manufacturing process from the inflowing material to the hardened and finished workpiece was recorded with data loggers. Three different sensors successfully determined the temperatures and pressure - Pt1000, NTC10k, and a digital combi sensor. The determined sensor values will serve as input parameters for the creation of a simulation model, which is to represent reality based on the measured data.
The current work is performed during a research project to implement an enhanced Cyber-Physical Systems for producing electrical insulators based on thermosets. As these materials undergo a highly exothermic curing reaction during production, appropriate production control is crucial to prevent issues, such as air pockets, suboptimal surface finish, cracks, or part deformation due to non-uniform curing and residual stresses. Therefore, extensive material characterization is combined with suitable material modeling to achieve exact virtual predictions of the curing process. Differential Scanning Calorimetry (DSC) under non-isothermal (dynamic) conditions is employed to characterize the curing behavior, providing crucial insights into thermal properties and phase transitions. The reaction kinetics are modeled using model-based methods, i.e., Prout-Tompkins, and model-free kinetic models, i.e. Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose. Thus, the activation energy, pre-exponential factor, and other kinetic parameters required for analysis are determined. The curing progress of the epoxy material under isothermal conditions is predicted and validated with reaction data obtained from the isothermal DSC measurements.