Poly(ethylene-co-isosorbide terephthalate) (PEIT) copolyesters could be used in various applications depending on their ability to crystallize. Moreover, the possibility to carry out solid-state post-condensation (SSP) is conditioned by its ability to sufficiently crystallize. The present study, thus, gives a systematic investigation of isothermal crystallization of these statistical copolyesters with isosorbide contents ranging from 4.8 to 20.8 mol.%. For each copolyester composition, the lowest isothermal half crystallization times and the highest Avrami constant (K) were obtained around 170 °C. Over the range of composition that was studied, both melting points and melting enthalpies decreased with increasing amounts of isosorbide (from 250 to 207 °C and from 55 to 28 J/g, respectively). On the contrary, half crystallization time displayed an exponential increase when increasing isosorbide contents in the studied range. Finally, structural and thermal analysis of PIT homopolyester are reported for the first time, showing that only ET moieties crystallized when PEIT was subjected to isothermal crystallization at 170 °C.
The insertion of rigid monomers such as isosorbide into poly(ethylene terephthalate) (PET) allows for the access of polymers with improved properties, notably in terms of thermal stability. This biobased monomer is however poorly reactive, and harsh reaction conditions lead to color concerns regarding the resulting polymer. This has motivated the development of catalytic systems enabling an increase of the reaction rate and a good coloration. In this study, we have assessed bimetallic catalytic systems based on the main metals used for PET catalysis, i.e., antimony, germanium and titanium, for the synthesis of poly(ethylene terephthalate-co-isosorbide terephthalate) (PEIT). The Sb2O3/Ti(OiPr)4 combination leads to a high reaction rate while maintaining an acceptable coloration. On the other hand, combining Sb2O3 with GeO2 affords the formation of poly(ethylene terephthalate-co-isosorbide terephthalate) without coloration concerns and a reaction rate higher than that observed using the single metal catalysts. Molecular weights and microstructure including diethyleneglycol (DEG) and isosorbide contents are also discussed, together with the thermal properties of the resulting PEIT. The GeO2/Ti(OiPr)4 is also assessed, and leads to average performances.