This paper presents an automated Non-Destructive Testing (NDT) system for the in-service inspection of orbital welds on tubular components operating at temperatures as high as 200 °C. The combination of two different NDT methods and respective inspection systems is here proposed to cover the detection of all potential defective weld conditions. The proposed NDT system combines ultrasounds and Eddy current techniques with dedicated approaches for dealing with high temperature conditions. Phased array ultrasound was employed, searching for volumetric defects within the weld bead volume while Eddy currents were used to look for surface and sub-surface cracks. The results from the phased array ultrasound results showed the effectiveness of the cooling mechanisms and that temperature effects on sound attenuation can be easily compensated for up to 200 °C. The Eddy current results showed almost no influence when temperatures were raised up to 300 °C.
In this work some organic natural products were studied, namely tannic acid, gallic acid, mimosa tannin and chestnut tannin, as potential green corrosion inhibitors of the aluminium alloy AA2024-T3. The anodizing treatment was performed in a solution of the referred organic compounds in diluted sulfuric acid. The electrochemical impedance spectroscopy and the potentiodynamic polarization were performed to assess sealing quality and corrosion protection granted by the anodic films. To understand the green inhibitors; interaction with the metal surface, FTIR spectra of anodizing and anodizing and sealed samples of AA2023-T3 were recorded, and the shifts in the position of the major bands confirmed that the green inhibitor interacts with the metal surface. Images of the morphology of the coatings were provided by Scanning Electron Microscopy. From the results obtained through the various techniques that were used to carry out this study it is possible to conclude that the formed anodic films can be a good contribution for the prevention of corrosion in the aluminium alloy AA2024-T3.
The research related to subsea inspection, and the prediction of corrosion is a challenging task, and the progress in this area is continuously generating exciting new developments that may be used in subsea inspection. Wall thickness monitoring is an important tool to control and predict corrosion, such as on platforms for the infrastructure of floating offshore wind power production. This study shows the results obtained in marine environments. For this experiment, a steel plate equipped with ultrasound transducers was placed in seawater to corrode naturally. The sensor test setup consisted of 15 ultrasound transducers and 1 temperature sensor, which were installed in the cassette. The data acquisition system was based on a standard industrial computer with software written in Python and MATLAB. The ultrasound signals were collected at regular intervals and processed to calculate the instantaneous wall thickness. The progress of corrosion was evaluated by trend plots of wall thickness versus time, and the change in shape of the ultrasonic back wall reflection waveform measured by each sensor.