In this paper, the mechanical behavior of a functionally graded carbon nanotube-reinforced composite (FG-CNTRC) plate is numerically investigated. According to the concept of a hierarchical model, the displacement is decomposed into the in-field functions and the assumed thickness-wise monomial. The former is defined on the plate midsurface and is approximated by the 2-D meshfree natural element method (NEM). The FG-CNTRC plate is modeled as a homogenized orthotropic body, and its effective elastic properties are determined by referring to MD simulation and the linear rule of mixtures. Regarding the thickness-wise distribution of CNTs, one uniform and three functionally gradient distributions are taken. Through comparative numerical experiments, the reliability of the numerical method is justified with the maximum relative difference of 6.12%. The effects of the volume fraction and vertical distribution of CNTs, the plate width-thickness and aspect ratios, and the boundary conditions on the bending, free vibration, and buckling behaviors of FG-CNTRC plates are examined. It is found that the mechanical behavior of FG-CNTRC plates is significantly dependent of these major parameters.
The development of novel anode materials for high energy density is required. Alloying Si with other metals is a promising approach to utilize the high capacity of Si. In this work, we optimized the composition of a Si–Ti–Al ternary alloy to achieve excellent electrochemical performance in terms of capacity, cyclability, and rate capability. The detailed internal structures of the alloys were characterized through their atomic compositions and diffraction patterns. The lithiation process of the alloy was monitored using real-time scanning electron microscopy, revealing that the mechanical stability of the optimized alloy was strongly enhanced compared to that of the pure silicon material.
The plastic properties for the jellyroll of lithium-ion batteries showed different behavior in tension and compression, showing the yield strength in compression being several times higher than in tension. The crushable foam models were widely used to predict the mechanical responses to compressive loadings. However, since the compressive characteristic is dominant in this model, it is difficult to identify distributions of the yield strength in tension. In this study, a simplified jellyroll model consisting of double-layer windings was devised to reflect different plastic characteristics of a jellyroll, and the proposed model was applied to an 18650 cylindrical battery under compressive loading conditions. One winding adopted the crushable foam model for representing the compressive plastic behavior, and the other winding adopted the elastoplastic models for tracking the tensile plastic behavior. The material parameters in the crushable foam model were calibrated by comparing the simulated force–displacement curve with the experimental one for the case where the cell was crushed between two plates when the punch was displaced by 7 mm. A specific cut-off value (10 MPa) was assigned to a yield stress limit in the elastoplastic model. Further, the computational model was validated with two more loading cases, a cylindrical rod indentation and a spherical punch indentation, as the punch was displaced by 6.3 mm and 6.5 mm, respectively. For three loading cases, deformed configurations and plastic strain distributions were investigated by finite element analysis. It was found that the proposed model clearly provides the plastic behavior both in compression and tension. For the crush simulation, the maximum compressive stress approached 222 MPa in the middle of the jellyroll, and the maximum effective plastic strain approached 60% in the middle of the layered roll. For indentation with the cylindrical and the spherical punch, the maximum effective plastic strain approached 52% and 277% in the layered roll, respectively. The local crack or location of a short circuit could be predicted from the maximum effective plastic strain.
For safety issues in lithium-ion batteries (LIBs), international standards and regulations for various abusive environments have been developed, and UL1642 in Underwriters Laboratories (UL) currently covers electrical, mechanical, environmental, and fire exposure tests. An impact test is one of mechanical abuse tests in UL1642, which aims to determine the safe prevention of fire or explosion. As the energy density of a lithium-ion battery is continuously increasing, it is difficult to pass the regulation. Therefore, it is necessary to predict failure mode due to an internal short circuit in developing high-capacity cells. For a sudden and measured mechanical force, we speculate that damage to a separator consisting of LIBs makes the battery experience an exothermic phenomenon due to an internal short circuit because a separator is a key component for preventing the electrical contact between two electrodes. Therefore, if we can find mechanical stresses of each component in LIBs, we can evaluate whether each component is severely damaged or not. In the present study, we propose a finite element model consisting of a multi-layered structure, which will permit us to assess the possible onset location of the short circuit, and to predict the sequence of failure at a cell level. We applied the proposed method to a cylindrical cell, and the accuracy of the model was verified through the comparison of the experiment results. Additionally, simulation results showed that it is possible to track mechanical stress variations of each component progressively. Furthermore, we performed the numerical experiment evaluating the thickness effect of a center-pin. We expect the proposed finite element model to be used in order to devise cell level abuse-tolerant design from a mechanical point of view before conducting mechanical abuse tests as part of the product development process.